Bedienungsanleitung Garmin echoMAP 73dv (Seite 25 von 30) (Englisch)

590098

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

Time Zone: Sets the time zone, or allows automatic selection

based on GPS location.

Navigation Settings

NOTE: Some settings and options require additional charts or

hardware.

Select Settings > Navigation.

Route Labels: Sets the type of labels shown with route turns on

the map.

Auto Guidance: Sets the measurements for the Safe Depth,

Safe Height, and Shoreline Distance, when you are using

some premium maps.

Turn Transition Activ.: Sets the turn transition to be calculated

based on time or distance.

Turn Transition Time: Sets how many minutes before the turn

that you transition to it as the next leg, when Time is selected

for the Turn Transition Activ.. You can raise this value to help

improve the accuracy of the autopilot when navigating a route

or an Auto Guidance line with many frequent turns or at

higher speeds. For straighter routes or slower speeds,

lowering this value can improve autopilot accuracy.

Turn Transition Dist.: Sets how far before the turn that you

transition to it as the next leg, when Distance is selected for

the Turn Transition Activ.. You can raise this value to help

improve the accuracy of the autopilot when navigating a route

or an Auto Guidance line with many frequent turns or at

higher speeds. For straighter routes or slower speeds,

lowering this value can improve autopilot accuracy.

Route Start: Selects a starting point for route navigation.

Other Vessel Settings

When your compatible chartplotter is connected to an AIS

device or VHF radio, you can set up how other vessels are

displayed on the chartplotter.

Select Settings > Other Vessels.

AIS: Enables and disables AIS signal reception.

DSC: Enables and disables digital selective calling (DSC).

AIS Alarm: Sets the collision alarm (Setting the Safe-Zone

Collision Alarm and Enabling AIS Transmission Test Alerts).

Restoring the Original Chartplotter Factory

Settings

NOTE: This will delete all settings information you have entered.

Select Settings > System > System Information > Factory

Settings.

Appendix

Registering Your Device

Help us better support you by completing our online registration

today.

• Go to http://my.garmin.com.

• Keep the original sales receipt, or a photocopy, in a safe

place.

Cleaning the Screen

NOTICE

Cleaners containing ammonia will harm the anti-reflective

coating.

The device is coated with a special anti-reflective coating which

is very sensitive to skin oils, waxes, and abrasive cleaners.

Apply an eyeglass lens cleaner specified as safe for anti-

reflective coatings to the cloth.

Gently wipe the screen with a soft, clean, lint-free cloth.

Screenshots

You can capture a screenshot of any screen shown on your

chartplotter as a bitmap (.bmp) file. You can transfer the

screenshot to your computer.

Capturing Screenshots

Insert a memory card into the card slot.

Select Settings > System > Display > Screenshot Capture

> On.

Go to a screen you want to capture.

Hold HOME for at least six seconds.

Copying Screenshots to a Computer

Remove the memory card from the chartplotter, and insert it

into a card reader that is attached to a computer.

From Windows

Explorer, open the Garmin\scrn folder on the

memory card.

Copy a .bmp file from the card and paste it to any location on

the computer.

Troubleshooting

My device will not acquire GPS signals

If the device is not acquiring satellite signals, there could be a

few causes. If the device has moved a large distance since the

last time it has acquired satellites or has been turned off for

longer than a few weeks or months, the device may not be able

to acquire the satellites correctly.

• Ensure the device is using the latest software. If not, update

the device software (Updating the Device Software).

My device will not turn on or keeps turning off

Devices erratically turning off or not turning on could indicate an

issue with the power supplied to the device. Check these items

to attempt to troubleshoot the cause of the power issue.

• Make sure the power source is generating power.

You can check this several ways. For example, you can

check whether other devices powered by the source are

functioning.

• Check the fuse in the power cable.

The fuse should be located in a holder that is part of the red

wire of the power cable. A 3 Amp fuse is used in this power

cable. Check the fuse to make sure there is still a connection

inside of the fuse. You can test the fuse using a multimeter. If

the fuse is good, the multimeter reads 0 ohms.

• Check to make sure the device is receiving is at least 10

volts, but 12 volts is recommended.

To check the voltage, measure the female sockets 8 (power)

and 2 (ground) of the power cable for DC voltage. If the

voltage is less than 10 volts, the device will not turn on.

• If the device is receiving enough power but does not turn on,

contact Garmin product support at www.garmin.com/support.

My device is not creating waypoints in the correct

location

You can manually enter a waypoint location to transfer and

share data from one device to the next. If you have manually

entered a waypoint using coordinates, and the location of the

point does not appear where the point should be, the map

datum and position format of the device may not match the map

datum and position format originally used to mark the waypoint.

Position format is the way in which the GPS receiver's position

appears on the screen. Commonly displayed as latitude/

Appendix 21

Garmin echoMAP 73dv Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info