Bedienungsanleitung Garmin Echomap Plus serie (Seite 1 von 6) (Englisch)

691424

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

ECHOMAP™ PLUS 40 SERIES

Installation Instructions

Important Safety Information

WARNING

See the Important Safety and Product Information guide in the

product box for product warnings and other important

information.

When connecting the power cable, do not remove the in-line

fuse holder. To prevent the possibility of injury or product

damage caused by fire or overheating, the appropriate fuse

must be in place as indicated in the product specifications. In

addition, connecting the power cable without the appropriate

fuse in place voids the product warranty.

CAUTION

Always wear safety goggles, ear protection, and a dust mask

when drilling, cutting, or sanding.

NOTICE

When drilling or cutting, always check what is on the opposite

side of the surface.

To obtain the best performance and to avoid damage to your

boat, install the device according to these instructions.

Read all installation instructions before proceeding with the

installation. If you experience difficulty during the installation,

contact Garmin

Product Support.

Software Update

You may need to update the device software when you install

the device or add an accessory to the device.

This device supports up to a 32 GB memory card, formatted to

FAT32.

Loading the New Software on a Memory Card

You must copy the software update to a memory card using a

computer that is running Windows

software.

NOTE: You can contact Garmin customer support to order a

preloaded software update card if you do not have a computer

with Windows software.

Insert a memory card into the card slot on the computer.

Go to www.garmin.com/support/software/marine.html.

Select echoMAP Series with SD Card.

Select Download next to echoMAP Series with SD Card.

Read and agree to the terms.

Select Download.

Choose a location, and select Save.

Double-click the downloaded file.

Select Next.

Select the drive associated with the memory card, and select

Next > Finish.

A Garmin folder containing the software update is created on the

memory card. The software update can take several minutes to

load onto the memory card.

Updating the Device Software

Before you can update the software, you must obtain a

software-update memory card or load the latest software onto a

memory card.

Turn on the chartplotter.

After the home screen appears, insert the memory card into

the card slot.

NOTE: In order for the software update instructions to

appear, the device must be fully booted before the card is

inserted.

Follow the on-screen instructions.

Wait several minutes while the software update process

completes.

When prompted, leave the memory card in place and restart

the chartplotter manually.

Remove the memory card.

NOTE: If the memory card is removed before the device

restarts fully, the software update is not complete.

Tools Needed

• Drill

• Drill bits

◦ Bail mount: drill bits appropriate for the surface and

hardware

◦ Swivel mount: 3 mm (

in.) drill bit

◦ Flush mount: 3 mm (

in.) and 9.5 mm (

in.) drill bits

• #2 Phillips screwdriver

• Jigsaw or rotary tool

• File and sandpaper

• Marine sealant (optional)

Mounting Considerations

The device can be mounted using the included bracket, or it can

be mounted flush with the dashboard using a flush-mount kit

(may be sold separately).

Before permanently installing any part of your device, you

should plan the installation by determining the location of the

various components.

• The mounting location must provide a clear view of the

screen and access to the keys on the device.

• The mounting location must be sturdy enough to support the

device and the mount.

• The cables must be long enough to connect the components

to each other and to power.

• The cables can be routed under the bail mount or behind the

device.

• To avoid interference with a magnetic compass, the device

should not be installed closer to a compass than the

compass-safe distance value listed in the product

specifications.

Installing the Swivel Base

Fastening the Swivel Mount without the Cables

Running through the Mount

You should complete this procedure only if you are not running

the power and transducer cables under the mounting surface

and through the swivel-mount base.

Place the base

on the mounting surface, and fasten it

using the appropriate screws or bolts

September 2017

190-02242-02_0A

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Echomap Plus serie Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Echomap Plus serie

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info