Bedienungsanleitung Garmin Echomap Plus serie (Seite 3 von 6) (Englisch)

691424

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

• If it is necessary to extend the NMEA 0183 or alarm wires,

you must use .33 mm

(22 AWG) wire.

Item Wire Function Wire Color

NMEA 0183 internal port Rx (in) Brown

NMEA 0183 internal port Tx (out) Blue

Ground (power and NMEA 0183) Black

Power Red

NMEA 0183 Connection Considerations

• The installation instructions provided with your NMEA 0183

compatible device should contain the information you need to

identify the transmitting (Tx) and receiving (Rx) A (+) and B

(-) wires. Each port may have one or two transmitting wires,

or one or two receiving wires.

• When connecting NMEA 0183 devices to ports containing

two transmitting (Tx) wires or two receiving (Rx) wires each, it

is not necessary for the NMEA 0183 device to connect to a

common ground.

• When connecting a NMEA 0183 device to ports containing

one transmitting (Tx) wire or one receiving (Rx) wire each,

the NMEA 0183 device must be connected to a common

ground.

• When the device is mounted in a location that prevents the

internal antenna from acquiring a satellite signal, you can

connect an external GPS 19x antenna through a NMEA 0183

connection. For more information, see the GPS 19x

Installation Instructions.

NMEA 0183 Connection Diagram

Item Description

12 Vdc power source

Wiring harness

NMEA 0183 compliant device

Item Garmin Wire

Function

Garmin Wire

Color

NMEA 0183 Device Wire

Function

Power Red Power

Ground Black Data ground

Tx/Rx Tx/Rx/B (-)

Tx Blue Rx/A (+)

Rx Brown Tx/A (+)

Connecting to a Garmin Device to Share User Data

You can connect the ECHOMAP Plus device to a compatible

Garmin device to share user data, such as waypoints. If the

devices are mounted near each other, you can connect the blue

and brown wires. If the devices are mounted too far apart for the

wires to reach, you can connect the devices using a User Data

Sharing Cable (010-12234-06).

Make sure both devices are connected to the same ground.

Complete an action:

• If the devices are mounted near each other, connect the

blue wire from the first device to the brown wire of the

second, and connect the brown wire from the first device

to the blue wire of the second.

• If the devices are not mounted near each other, obtain a

User Data Sharing Cable (010-12234-06), and connect

the devices following the instructions included with the

cable.

On both devices, select Navigation Info > Manage Data >

User Data Sharing.

User data is shared between the connected devices. If you

select Clear User Data, data is removed from both connected

devices.

Connecting the Device to a Transducer

Go to www.garmin.com/transducers or contact your local

Garmin dealer to determine the appropriate type of transducer

for your needs.

Follow the instructions provided with your transducer to

correctly install it on your boat.

Route the transducer cable to the back of your device, away

from sources of electrical interference.

Connect the transducer cable to the appropriate port on the

cradle.

Connecting the Cables to the Cradle

The connectors on the cables are keyed to fit in only in the

correct ports on the cradle. The connected cables are held in

place by a locking bracket.

Slide the cable locking bracket up from the bottom and

remove the bracket from the cradle.

Compare the divots

on each cable connector to the keying

on each port to determine which cable corresponds to each

port.

Fully and firmly insert each cable through a hole in the cradle,

and securely connect each cable to a port.

NOTE: If the cables are not inserted far enough into the

cradle, the connectors may not connect securely to the ports,

and the device may appear to lose power or stop working.

Place the locking bracket

over the cables and slide the

bracket down to lock the cables in place.

There is an audible click when the locking bracket is installed

correctly.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Echomap Plus serie Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Echomap Plus serie

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info