Bedienungsanleitung Garmin ECHOMAP UHD2 - 7 (Seite 17 von 82) (Englisch)

801317

Zoom out

Zoom in

Vorherige Seite

1/82

Nächste Seite

Renewing Your Subscription

Your cartography subscription expires after one year. After the subscription expires, you can continue using the

downloaded charts, but you are not able to download the latest chart updates or additional content.

1Connect your mobile device to the internet and open the ActiveCaptain app.

2Select Chart > > My Charts.

3Select the chart to renew.

4Select Renew Now.

NOTE: It might take a few hours to display the renewed subscription.

Wireless Sharing

You can connect two ECHOMAP UHD2 devices wirelessly to share user data and sonar (Connecting Two

ECHOMAP UHD2 Devices to Share User Data and Sonar, page11). The first time you open the wireless network

settings, you are prompted to set up the wireless network on the host device. After you set up the network, you

can also connect the device to other wireless devices, such as your phone, to use the ActiveCaptain app (Getting

Started with the ActiveCaptain App, page9).

Setting Up the Wi‑Fi Network

This device can host a Wi‑Fi network to which you can connect wireless devices such as another chartplotter or

your phone. The first time you access the wireless network settings, you are prompted to set up the network.

1Select > Communications > Wi-Fi Network > Wi-Fi > On > OK.

2If necessary, enter a name for this wireless network.

3Enter a password.

You will need this password to access the wireless network from a wireless device, such as your phone. The

password is case-sensitive.

Connecting Two ECHOMAP UHD2 Devices to Share User Data and Sonar

You can connect two ECHOMAP UHD2 devices to share user data and sonar wirelessly.

User data is shared automatically between the two devices while they are connected. Sonar sharing may require

you to select a sonar source (Sonar Sharing, page12).

To connect the two devices, you must designate one device as the host and the other device as the client. You

can only connect two ECHOMAP UHD2 devices at a time. The host device can be connected to other wireless

devices like your phone or tablet while it is connected with a ECHOMAP UHD2 device.

NOTE: A ECHOMAP UHD2 6/7/9 sv device cannot connect to a ECHOMAP UHD2 5/7 cv set as the host device.

You must set up the ECHOMAP UHD2 6/7/9 sv device as the host in this situation.

1Ensure the two ECHOMAP UHD2 devices are within range, 32m (105ft.), and turn on both devices.

2On the ECHOMAP UHD2 that will host the network, set up the Wi‑Fi network (Setting Up the Wi‑Fi Network,

page11).

3On the ECHOMAP UHD2 host device, select > Communications > Wi-Fi Network > Wi-Fi > On > Host >

Pair Chartplotter > Start.

4On the ECHOMAP UHD2 client device, select > Communications > Wi-Fi Network > Wi-Fi > On > Client >

Pair Host > Start.

5Select OK after devices connect successfully.

To unpair the devices and remove the wireless credentials so they do not attempt to connect in the future, on

the client device select > Communications > Wi-Fi Network > Unpair.

If you cannot connect the two devices, troubleshoot the connection and try again (Troubleshooting the Wireless

Connection, page12).

Wireless Sharing 11

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin ECHOMAP UHD2 - 7 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin ECHOMAP UHD2 - 7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info