Bedienungsanleitung Garmin ECHOMAP UHD2 - 9 SV (Seite 139 von 154) (Englisch)

801319

139

Zoom out

Zoom in

Vorherige Seite

1/154

Nächste Seite

Setting the Anchor Drag Alarm

You can set an alarm to sound if you have moved outside an allowable radius you set when configuring the

alarm.

WARNING

The anchor drag alarm is a tool for situational awareness only, and may not prevent grounding or collisions in

all circumstances. You are responsible for the safe and prudent operation of your vessel, for remaining aware

of your surroundings, and for using safe judgement on the water at all times. Failure to heed this warning could

result in property damage, serious personal injury, or death.

CAUTION

The Beeper setting must be turned on to make alarms audible (Sounds and Display Settings, page123). Failure

to set audible alarms could lead to injury or property damage.

1Select Settings > Alarms > Navigation > Anchor Drag.

2Select Alarm to turn on the alarm.

3Select Set Radius, and select a distance on the chart.

4Select Back.

System Alarms

Select Settings > Alarms > System.

Clock

Sets an alarm clock.

Unit Voltage: Sets an alarm to sound when the battery reaches a specified low voltage.

GPS Accuracy: Sets an alarm to sound when the GPS location accuracy falls outside the user-defined value.

Sonar Alarms

WARNING

The sonar alarms feature is a tool for situational awareness only and may not prevent grounding in all

circumstances. It is your obligation to ensure safe operation of the vessel.

CAUTION

The Beeper setting must be turned on to make alarms audible (Sounds and Display Settings, page123). Failure

to set audible alarms could lead to injury or property damage.

NOTE: Not all options are available on all transducers.

From an applicable sonar view, select > Sonar Setup > Alarms.

You can also open the sonar alarms by selecting Settings > Alarms > Sonar.

Shallow Water: Sets an alarm to sound when the depth is less than the specified value.

Deep Water: Sets an alarm to sound when the depth is greater than the specified value.

FrontVü Alarm: Sets an alarm to sound when the depth in front of the vessel is less than the specified value,

which can help you avoid running aground (Setting the FrontVü Depth Alarm, page78). This alarm is available

only with Panoptix FrontVü transducers.

Water Temp.: Sets an alarm to sound when the transducer reports a temperature that is 2°F (1.1°C) above or

below the specified temperature.

Contour: Sets an alarm to sound when the transducer detects a suspended target within the specified depth

from the surface of the water and from the bottom.

Fish: Sets an alarm to sound when the device detects a suspended target.

• sets the alarm to sound when fish of all sizes are detected.

• sets the alarm to sound only when medium or large fish are detected.

• sets the alarm to sound only when large fish are detected.

Device Configuration 129

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin ECHOMAP UHD2 - 9 SV Seite 139

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin ECHOMAP UHD2 - 9 SV

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info