Bedienungsanleitung Garmin ECHOMAP UHD2 - 9 SV (Seite 143 von 154) (Englisch)

801319

143

Zoom out

Zoom in

Vorherige Seite

1/154

Nächste Seite

Other Vessels Settings

CAUTION

The Beeper setting must be turned on to make alarms audible (Sounds and Display Settings, page123). Failure

to set audible alarms could lead to injury or property damage.

When your compatible chartplotter is connected to an AIS device or VHF radio, you can set up how other

vessels are displayed on the chartplotter.

Select Settings > Other Vessels.

AIS: Enables and disables AIS signal reception.

DSC: Enables and disables digital selective calling (DSC).

Collision Alarm: Sets the collision alarm (Setting the Safe-Zone Collision Alarm, page24).

AIS-EPIRB Test: Enables test signals from Emergency Position Indicating Radio Beacons (EPRIB).

AIS-MOB Test: Enables test signals from man overboard (MOB) devices.

AIS-SART Test: Enables test transmissions from Search and Rescue Transponders (SART).

Restoring the Original Chartplotter Factory Settings

NOTE: This affects all devices on the network.

1Select Settings > System > System Information > Reset.

2Select an option:

• To reset the device settings to the factory default values, select Reset Default Settings. This restores the

default configuration settings, but does not remove saved user data, maps, or software updates.

• To reset all settings in all devices in the station to the factory default values, select Reset Station

Settings. This restores the default configuration settings, but does not remove saved user data, maps, or

software updates

• To clear saved data, such as waypoints and routes, select Delete User Data. This does not affect maps or

software updates.

• To clear saved data and reset device settings to the factory default values, disconnect the chartplotter

from the Garmin Marine Network, and select Delete Data and Reset Settings. This does not affect maps

or software updates.

Sharing and Managing User Data

WARNING

This feature allows you to import data from other devices that may have been generated by third parties.

Garmin makes no representations about the accuracy, completeness, or timeliness of data that is generated by

third parties. Any reliance on or use of such data is at your own risk.

You can share user data between compatible devices. User data includes waypoints, saved tracks, routes, and

boundaries.

• You can share and manage user data using a memory card. You must have a memory card installed in the

device. This device supports up to a 32 GB memory card, formatted to FAT32.

Selecting a File Type for Third-Party Waypoints and Routes

You can import and export waypoints and routes from third-party devices.

1Insert a memory card into the card slot.

2Select Info > Manage User Data > Data Transfer > File Type.

3Select GPX.

To transfer data with Garmin devices again, select the ADM file type.

Sharing and Managing User Data 133

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin ECHOMAP UHD2 - 9 SV Seite 143

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin ECHOMAP UHD2 - 9 SV

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info