Bedienungsanleitung Garmin ECHOMAP Ultra 100 (Seite 14 von 52) (Englisch)

691421

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Chart Menu

NOTE: Not all settings apply to all chart views. Some options

require premium maps or connected accessories.

NOTE: The menus may contain some settings that are not

supported by your installed charts or your present location. If

you make changes to those settings, the changes will not impact

the chart view.

These settings apply to the chart views, except Fish Eye 3D

(Fish Eye 3D Settings, page 9).

From a chart, select Menu.

Layers: Adjusts the appearance of the different items on the

charts (Chart Layer Settings, page 8).

Waypoints & Tracks: Adjusts how waypoints and tracks are

shown (User Data Layer Settings, page 8).

Quickdraw Contours: Turns on bottom contour drawing, and

allows you to create fishing map labels (Garmin Quickdraw

Contours Mapping, page 9).

Chart Setup: Adjusts the orientation and level of detail shown

on the chart and adjusts the data shown on the screen.

Chart Layers

You can turn on and off chart layers and customize features of

the charts. Each setting is specific to the chart or chart view

being used.

NOTE: Not all settings apply to all charts and chartplotter

models. Some options require premium maps or connected

accessories.

NOTE: The menus may contain some settings that are not

supported by your installed charts or your present location. If

you make changes to those settings, the changes will not impact

the chart view.

From a chart, select Menu > Layers.

Chart: Shows and hides chart-related items.

My Vessel: Shows and hides items relating to the boat (My

Vessel Layer Settings, page 8).

User Data: Shows and hides user data, such as waypoints,

boundaries, and tracks, and opens user data lists (User Data

Layer Settings, page 8).

Other Vessels: Adjusts how other vessels are shown (Other

Vessels Layer Settings, page 9).

Water: Shows and hides depth items (Water Layer Settings,

page 9).

Quickdraw Contours: Shows and hides Garmin Quickdraw

Contours data (Garmin Quickdraw Contours Settings,

page 11).

Chart Layer Settings

From a chart, select Menu > Layers > Chart.

Satellite Photos: Shows high-resolution satellite images on the

land or on both land and sea portions of the Navigation chart,

when certain premium maps are used (Showing Satellite

Imagery on the Navigation Chart, page 6).

NOTE: This setting must be enabled to view Standard

Mapping charts.

Tides & Currents: Shows current station indicators and tide

station indicators on the chart and enables the tides and

current slider, which sets the time for which tides and

currents are reported on the map.

Land POIs: Shows points of interest on land.

Navaid: Shows navigational aids, such as ATONs and flashing

lights, on the chart. Allows you to select NOAA or IALA

navaid type.

Service Points: Shows locations for marine services.

Depth: Adjusts the items on the depth layer.

Restricted Areas: Shows information about restricted areas on

the chart.

Photo Points: Shows camera icons for aerial photos (Viewing

Aerial Photos of Landmarks, page 6).

My Vessel Layer Settings

From a chart, select Menu > Layers > My Vessel.

Heading Line: Shows and adjusts the heading line, which is a

line drawn on the map from the bow of the boat in the

direction of travel (Setting the Heading Line and Angle

Markers, page 5).

Laylines: Adjusts the laylines, when in sailing mode (Laylines

Settings, page 8).

Roses: Allows you to display roses on the chart. Wind roses

show a visual representation of the wind angle or direction

provided by the connected wind sensor. The compass rose

indicates the compass direction oriented to the heading of the

boat.

Vessel Icon: Sets the icon that represents your present location

on the chart.

Laylines Settings

To use the laylines features, you must connect a wind sensor to

the chartplotter.

When in sailing mode (Setting the Vessel Type, page 2), you

can display laylines on the navigation chart. Laylines can be

very helpful when racing.

From the navigation chart, select Menu > Layers > My Vessel >

Laylines > Setup.

Display: Sets how the laylines and vessel appear on the chart,

and sets the length of the laylines.

Sailing Angle: Allows you to select how the device calculates

laylines. The Actual option calculates the laylines using the

measured wind angle from the wind sensor. The Manual

option calculates the laylines using manually entered

windward and leeward angles.

Windward Angle: Allows you to set a layline based on the

windward sailing angle.

Leeward Angle: Allows you to set a layline based on the

leeward sailing angle.

Tide Correction: Corrects the laylines based on the tide.

Filter Time Constant: Filters the layline data based on the time

interval entered. For a smoother layline that filters out some

of the changes in the boat's heading or true wind angle, enter

a higher number. For laylines that display a higher sensitivity

to changes in the boat's heading or true wind angle, enter a

lower number.

User Data Layer Settings

You can show user data, such as waypoints, boundaries, and

tracks, on the charts.

From a chart, select Menu > Layers > User Data.

Waypoints: Shows waypoints on the chart and opens the list of

waypoints.

8 Charts and 3D Chart Views

Garmin ECHOMAP Ultra 100 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin ECHOMAP Ultra 100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info