Bedienungsanleitung Garmin ECHOMAP Ultra 100 (Seite 20 von 52) (Englisch)

691421

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Select Offset to navigate parallel to the route, offset from it

by a specific distance.

Indicate how to navigate the route:

• To navigate the route from the starting point used when

the route was created, to the left of the original route,

select Forward - Port.

• To navigate the route from the starting point used when

the route was created, to the right of the original route,

select Forward - Starboard.

• To navigate the route from the destination point used

when the route was created, to the left of the original

route, select Backward - Port.

• To navigate the route from the destination point used

when the route was created, to the right of the original

route, select Backward - Starboard.

If necessary, select Done.

A magenta line appears. In the center of the magenta line is

a thinner purple line that represents the corrected course

from your present location to the destination. The corrected

course is dynamic, and it moves with your boat when you are

off course.

Review the course indicated by the magenta line.

Follow the magenta line along each leg in the route, steering

to avoid land, shallow water, and other obstacles.

If you are off course, follow the purple line (corrected course)

to go to your destination, or steer back to the magenta line

(direct course).

Deleting a Saved Route

Select Nav Info > Routes.

Select a route.

Select Review > Delete.

Deleting All Saved Routes

Select Nav Info > Manage Data > Clear User Data >

Routes.

Auto Guidance

WARNING

The Auto Guidance feature is based on electronic chart

information. That data does not ensure obstacle and bottom

clearance. Carefully compare the course to all visual sightings,

and avoid any land, shallow water, or other obstacles that may

be in your path.

All route and navigation lines displayed on the chartplotter are

only intended to provide general route guidance or to identify

proper channels, and are not intended to be precisely followed.

Always defer to the navaids and conditions on the water when

navigating to avoid groundings or hazards that could result in

vessel damage, personal injury, or death.

NOTE: Auto Guidance is available with premium charts, in some

areas.

You can use Auto Guidance to plot the best path to your

destination. Auto Guidance uses your chartplotter to scan chart

data, such as water depth and known obstacles, to calculate a

suggested path. You can adjust the path during navigation.

Setting and Following an Auto Guidance Path

Select a destination (Destinations, page 11).

Select Navigate To > Auto Guidance.

Review the path, indicated by the magenta line.

Select Start Navigation.

Follow the magenta line, steering to avoid land, shallow

water, and other obstacles.

NOTE: When using Auto Guidance, a gray segment within

any part of the magenta line indicates that Auto Guidance

cannot calculate part of the Auto Guidance line. This is due to

the settings for minimum safe water depth and minimum safe

obstacle height.

Creating and Saving an Auto Guidance Path

Select Nav Info > Routes > New > Auto Guidance.

Select a starting point, and select Next.

Select a destination, and select Next.

Select an option:

• To view a hazard and adjust the path near a hazard,

select Hazard Review.

• To adjust the path, select Adjust Path, and follow the on-

screen instructions.

• To delete the path, select Delete.

• To save the path, select Done.

Adjusting an Auto Guidance Path

Select Nav Info > Routes.

Select a path, and select Review > Edit > Adjust Path.

TIP: When navigating an Auto Guidance path, select the path

on the navigation chart, and select Adjust Path.

Select a location on the path.

Drag the point to a new location.

If necessary, select a point, and select Remove.

Select Done.

Canceling an Auto Guidance Calculation in Progress

From the Navigation chart, select Menu > Cancel.

TIP: You can select Back to quickly cancel the calculation.

Setting a Timed Arrival

You can use this feature on a route or an Auto Guidance path to

get feedback about when you should arrive at a selected point.

This allows you to time your arrival at a location, such as a

bridge opening or a race starting line.

From the Navigation chart, select Menu.

Select Timed Arrival.

TIP: You can quickly open the Timed Arrival menu by

selecting a point on the path or route.

Auto Guidance Path Configurations

CAUTION

The Preferred Depth and Vertical Clearance settings influence

how the chartplotter calculates an Auto Guidance path. If an

area has an unknown water depth or an unknown obstacle

height, the Auto Guidance path is not calculated in that area. If

an area at the beginning or the end of an Auto Guidance path is

shallower than the Preferred Depth or lower than the Vertical

Clearance settings, the Auto Guidance path may not be

calculated in that area, depending on the map data. On the

chart, the course through those areas appears as a gray line or

a magenta and gray striped line. When your boat enters one of

those areas, a warning message appears.

NOTE: Auto Guidance is available with premium charts, in some

areas.

NOTE: Not all settings apply to all maps.

You can set the parameters the chartplotter uses when

calculating an Auto Guidance path.

Preferred Depth: Sets the minimum water depth, based on

chart depth data, that your boat can safely travel over.

NOTE: The minimum water depth for the premium charts

(made before 2016) is 3 feet. If you enter a value of less than

14 Navigation with a Chartplotter

Garmin ECHOMAP Ultra 100 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin ECHOMAP Ultra 100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info