Bedienungsanleitung Garmin ECHOMAP Ultra 100 (Seite 35 von 52) (Englisch)

691421

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Speed indicator.

Increases the speed.

Enables the cruise control at the current speed over ground

(SOG).

Engages the propellor at full speed.

Trolling motor status.

Enables anchor lock, which uses the trolling motor to hold your

position.

Steers the trolling motor.

When in anchor lock, jogs the anchor lock position forward,

backward, left, or right.

Enables heading hold (set and maintain the current heading).

When the trolling motor is in heading hold, an autopilot bar

appears in the trolling motor bar.

Opens the trolling motor settings.

Trolling Motor Settings

From the trolling motor bar, select .

Calibrate: Calibrates the trolling motor compass (Calibrating the

Trolling Motor Compass, page 29) and sets the trolling

motor bow offset (Setting the Bow Offset, page 29).

Anchor Gain: Sets the response of the trolling motor when in

anchor lock mode. If you need the trolling motor to be more

responsive and move quicker, increase the value. If the

motor is moving too much, decrease the value.

Navigation Gain: Sets the response of the trolling motor when

navigating. If you need the trolling motor to be more

responsive and move quicker, increase the value. If the

motor is moving too much, decrease the value.

Heading Hold Mode: Sets the heading hold mode. The Vessel

Align option attempts to keep the boat pointing in the same

direction. The Navigate To option attempts to navigate a

straight line in the requested direction.

Auto Power On: Turns on the trolling motor when you apply

power to the system.

Prop. Stow Side: Sets which side of the trolling motor the

propellor rotates to when stowing the trolling motor. This is

helpful when you store other items near the stowed propellor.

Shortcut Keys: Enables the shortcut keys on the trolling motor

remote control to work with this particular chartplotter. The

keys work with only one chartplotter at a time.

Restore Defaults: Resets the trolling motor settings to the

factory default values.

Assigning a Shortcut to the Trolling Motor Remote

Control Shortcut Keys

You can quickly open commonly used screens by assigning a

shortcut key on the trolling motor remote control. You can create

a shortcut to screens, such as sonar screens and charts.

Open a screen.

Hold a shortcut key.

TIP: The shortcut is also saved to the Frequently Used

category with the shortcut key number.

Calibrating the Trolling Motor Compass

You must calibrate the compass in the trolling motor before you

can use the autopilot features.

Drive the boat to an open area of calm water.

From the trolling motor bar, select > Calibrate >

Compass Cal..

Follow the on-screen instructions.

Setting the Bow Offset

Based on the installation angle, the trolling motor may not align

with the center line of your boat. For the best results, you should

set the bow offset.

Adjust the angle of the trolling motor so it aligns with the

center line of your boat , pointing straight forward.

From the trolling motor bar, select > Calibrate > Bow

Offset.

Gauges and Graphs

The gauges and graphs provide various information about the

engine and environment. To view the information, a compatible

transducer or sensor must be connected to the network.

Viewing the Compass

You can view information about your bearing, heading, and

route using the compass.

Select Gauges > Compass.

Viewing Trip Gauges

Trip gauges show information for odometer, speed, time, and

fuel for your present trip.

Select Gauges > Trip.

Resetting Trip Gauges

Select Gauges > Trip > Menu.

Select an option:

• To set all the readings for the present trip to zero, select

Reset Trip.

• To set the maximum speed reading to zero, select Reset

Maximum Speed.

• To set the odometer reading to zero, select Reset

Odometer.

• To set all the readings to zero, select Reset All.

Viewing Engine and Fuel Gauges

Before you can view engine and fuel gauges, you must be

connected to a NMEA 2000 network capable of sensing engine

and fuel data. See the installation instructions for details.

Select Gauges > Engine.

Gauges and Graphs 29

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin ECHOMAP Ultra 100 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin ECHOMAP Ultra 100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info