Bedienungsanleitung Garmin ECHOMAP Ultra serie (Seite 17 von 52) (Englisch)

691420

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Use the map and search features to locate an area to

download.

The red dots represent Garmin Quickdraw Contours maps

that have been shared for that region.

Select Select an Area to Download.

Drag the edges of the box to select the area to download.

Select Start Download.

Save the file to your memory card.

TIP: If you cannot find the file, look in the "Downloads" folder.

The browser may have saved the file there.

Remove the memory card from your computer.

Insert the memory card into the card slot (Inserting Memory

Cards, page 1).

The chartplotter automatically recognizes the contours maps.

The chartplotter may take a few minutes to load the maps.

Garmin Quickdraw Contours Settings

From a chart, select Menu > Quickdraw Contours > Settings.

Recording Offset: Sets the distance between the sonar depth

and the contour recording depth. If the water level has

changed since your last recording, adjust this setting so the

recording depth is the same for both recordings.

For example, if the last time you recorded had a sonar depth

of 3.1 m (10.5 ft.), and today's sonar depth is 3.6 m (12 ft.),

enter -0.5 m (-1.5 ft.) for the a Recording Offset value.

User Display Offset: Sets differences in contour depths and

depth labels on your own contours maps to compensate for

changes in the water level of a body of water, or for depth

errors in recorded maps.

Comm. Display Offset: Sets differences in contour depths and

depth labels on the community contours maps to compensate

for changes in the water level of a body of water, or for depth

errors in recorded maps.

Survey Coloring: Sets the color of the Garmin Quickdraw

Contours display. When this setting is turned on, the colors

indicate the quality of the recording. When this setting is

turned off, the contour areas use standard map colors.

Green indicates good depth and GPS position, and a speed

under 16 km/h (10 mph). Yellow indicates good depth and

GPS position, and a speed between 16 and 32 km/h (10 and

20 mph). Red indicates poor depth or GPS position, and a

speed above 32 km/h (20 mph).

Navigation with a Chartplotter

WARNING

All route and navigation lines displayed on the chartplotter are

only intended to provide general route guidance or to identify

proper channels, and are not intended to be precisely followed.

Always defer to the navaids and conditions on the water when

navigating to avoid groundings or hazards that could result in

vessel damage, personal injury, or death.

The Auto Guidance feature is based on electronic chart

information. That data does not ensure obstacle and bottom

clearance. Carefully compare the course to all visual sightings,

and avoid any land, shallow water, or other obstacles that may

be in your path.

When using Go To, a direct course and a corrected course may

pass over land or shallow water. Use visual sightings, and steer

to avoid land, shallow water, and other dangerous objects.

CAUTION

If your vessel has an autopilot system, a dedicated autopilot

control display must be installed at each steering helm in order

to disable the autopilot system.

NOTE: Some chart views are available with premium charts, in

some areas.

To navigate, you must choose a destination, set a course or

create a route, and follow the course or route. You can follow

the course or the route on the Navigation chart, Fishing chart,

Perspective 3D chart view, or Mariner’s Eye 3D chart view.

You can set and follow a course to a destination using one of

three methods: Go To, Route To, or Auto Guidance.

Go To: Takes you directly to the destination. This is the

standard option for navigating to a destination. The

chartplotter creates a straight-line course or navigation line to

the destination. The path may run over land and other

obstacles.

Route To: Creates a route from your location to a destination,

allowing you to add turns along the way. This option provides

a straight-line course to the destination, but allows you to add

turns into the route to avoid land and other obstacles.

Auto Guidance: Uses the specified information about your

vessel and chart data to determine the best path to your

destination. This option is available only when using a

compatible premium chart in a compatible chartplotter. It

provides a turn-by-turn navigation path to the destination,

avoiding land and other obstacles (Auto Guidance,

page 14).

When you are using a compatible Garmin autopilot

connected to the chartplotter using NMEA 2000, the autopilot

follows the Auto Guidance route.

NOTE: Auto Guidance is available with premium charts, in

some areas.

Basic Navigation Questions

Question Answer

How do I make the chartplotter

point me in the direction in

which I want to go (bearing)?

Navigate using Go To (Setting and

Following a Direct Course Using Go

To, page 12).

How do I make the device

guide me along a straight line

(minimizing cross track) to a

location using the shortest

distance from the present

location?

Build a single-leg route and navigate it

using Route To (Creating and

Navigating a Route From Your

Present Location, page 13).

How do I make the device

guide me to a location while

avoiding charted obstacles?

Build a multi-leg route and navigate it

using Route To (Creating and

Navigating a Route From Your

Present Location, page 13).

How do I make the device steer

my automatic pilot?

Navigate using Route To (Creating

and Navigating a Route From Your

Present Location, page 13).

Can the device create a path

for me?

If you have premium maps that

support Auto Guidance and are in an

area covered by Auto Guidance,

navigate using Auto Guidance (Setting

and Following an Auto Guidance Path,

page 14).

How do I change the Auto

Guidance settings for my boat?

See (Auto Guidance, page 14).

Destinations

You can select destinations using various charts and 3D chart

views or using the lists.

Searching for a Destination by Name

You can search for saved waypoints, saved routes, saved

tracks, and marine services destinations by name.

Select Nav Info > Search by Name.

Enter at least a portion of the name of your destination.

If necessary, select Done.

Navigation with a Chartplotter 11

Garmin ECHOMAP Ultra serie Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin ECHOMAP Ultra serie

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info