Bedienungsanleitung Garmin ECHOMAP Ultra serie (Seite 22 von 52) (Englisch)

691420

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Deleting All Saved Tracks

Select Nav Info > Manage Data > Clear User Data > Saved

Tracks.

Retracing the Active Track

The track currently being recorded is called the active track.

Select Nav Info > Tracks > Follow Active Track.

Select an option:

• Select the time the active track began.

• Select Entire Log.

Review the course indicated by the colored line.

Follow the colored line, steering to avoid land, shallow water,

and other obstacles.

Clearing the Active Track

Select Nav Info > Manage Data > Tracks > Clear Active

Track.

The track memory is cleared, and the active track continues

to be recorded.

Managing the Track Log Memory During Recording

Select Nav Info > Tracks > Active Track Options.

Select Record Mode.

Select an option:

• To record a track log until the track memory is full, select

Fill.

• To continuously record a track log, replacing the oldest

track data with new data, select Wrap.

Configuring the Recording Interval of the Track Log

You can indicate the frequency at which the track plot is

recorded. Recording more frequent plots is more accurate but

fills the track log faster. The resolution interval is recommended

for the most efficient use of memory.

Select Nav Info > Tracks > Active Track Options > Record

Interval.

Select an option:

• To record the track based on a distance between points,

select Interval > Distance > Change, and enter the

distance.

• To record the track based on a time interval, select

Interval > Time > Change, and enter the time interval.

• To record the track plot based on a variance from your

course, select Interval > Resolution > Change, and enter

the maximum error allowed from the true course before

recording a track point. This is the recommended

recording option.

Boundaries

Boundaries allow you to avoid or remain in designated areas in

a body of water. You can set an alarm to alert you when you

enter or exit a boundary.

You can create boundary areas, lines, and circles using the

map. You can also convert saved tracks and routes into

boundary lines. You can create a boundary area using

waypoints by creating a route from the waypoints, and

converting the route into a boundary line.

You can select a boundary to act as the active boundary. You

can add the active boundary data to the data fields on the chart.

Creating a Boundary

Select Nav Info > Boundaries > New.

Select a boundary shape.

Follow the on-screen instructions.

Converting a Route to a Boundary

Before you can convert a route to a boundary, you must create

and save at least one route (Creating and Saving a Route,

page 13).

Select Nav Info > Routes.

Select a route.

Select Review > Edit Route > Save as Boundary.

Converting a Track to a Boundary

Before you can convert a track to a boundary, you must record

and save at least one track (Saving the Active Track, page 15).

Select Nav Info > Tracks > Saved Tracks.

Select a track.

Select Review > Edit Track > Save As > Save as

Boundary.

Editing a Boundary

Select Nav Info > Boundaries.

Select a boundary.

Select Review > Edit Boundary.

Select an option:

• To edit the appearance of the boundary on the chart,

select Display Options.

• To change the boundary lines or name, select Edit

Boundary.

• To edit the boundary alarm, select Alarm.

Setting a Boundary Alarm

Boundary alarms alert you when you are within a specified

distance of a set boundary. This can be helpful when attempting

to avoid certain areas or when you should be very alert in

certain areas, such as shipping lanes.

Select Nav Info > Boundaries.

Select a boundary.

Select Review > Alarm > On.

Select an option.

• To set an alarm for when your boat is a specified distance

from the boundary, select Warning Distance, enter a

distance, and select Done.

• To set an alarm when you enter the boundary, select Area

> Entering > Exiting.

• To set an alarm when you exit the boundary, select Area

> Exiting.

Deleting a Boundary

Select Nav Info > Boundaries.

Select a boundary.

Select Review > Edit Boundary > Delete.

Deleting All Saved Waypoints, Routes, and

Tracks

Select Nav Info > Manage Data > Clear User Data > All >

OK.

Sonar Fishfinder

When properly connected to a compatible transducer, your

chartplotter can be used as a fishfinder.

For more information about which transducer is best for your

needs, go to garmin.com/transducers.

Different sonar views can help you view the fish in the area. The

sonar views available vary depending on the type of transducer

and sounder module connected to the chartplotter. For example,

16 Sonar Fishfinder

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin ECHOMAP Ultra serie Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin ECHOMAP Ultra serie

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info