Bedienungsanleitung Garmin EDGE 130 PLUS (Seite 16 von 22) (Englisch)

725379

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

Marking Laps

You can use the Auto Lap feature to mark a lap at a specific

distance automatically, and you can mark laps manually. This

feature is helpful for comparing your performance over different

parts of an activity.

Hold .

Select Ride Settings > Laps.

Select an option:

• Select Auto Lap to use the Auto Lap feature.

The device automatically marks a lap every 5 miles or 5

kilometers, depending on your system settings (System

Settings, page 12).

• Select Lap Key to use to mark a lap during an activity.

Using Auto Pause

You can use the Auto Pause feature to pause the timer

automatically when you stop moving. This feature is helpful if

your activity includes stop lights or other places where you need

to stop.

NOTE: The paused time is not saved with your history data.

Hold .

Select Ride Settings > Auto Pause.

Using Auto Scroll

You can use the Auto Scroll feature to cycle through the training

data pages automatically while the timer is running.

Hold .

Select Ride Settings > Auto Scroll.

Select a display speed.

Changing Data Fields

You can change the data field combinations for the pages that

appear while the timer is running (Data Fields, page 14).

Hold .

Select Ride Settings > Data Pages.

Select > Layout.

Select or to change the layout.

Select to enable the layout.

Select or to edit the data fields.

Phone Settings

Hold , and select Phone.

Status: Enables Bluetooth wireless technology.

NOTE: Other Bluetooth settings appear only when Bluetooth

wireless technology is enabled.

Notifications: Allows you to enable phone notifications from

your compatible smartphone.

Pair Phone: Connects your device with a compatible Bluetooth

enabled smartphone. This setting allows you to use Bluetooth

connected features, including LiveTrack and activity uploads

to Garmin Connect.

System Settings

Hold , and select System.

Language: Sets the language displayed on the device

(Changing the Device Language, page 12).

Backlight: Sets the backlight timeout, brightness, and behavior

(Using the Backlight, page 12).

Sounds: Turns audible tones on or off for keys and alert

messages (Turning the Device Tones On and Off, page 12).

Units: Sets the units of measure used on the device.

Time: Sets the device to display time in a 12-hour or 24-hour

format.

Position Format: Allows you to set the format for viewing

geographical coordinate position details.

Auto Power Off: Allows you to set the device to automatically

power down after 10 minutes of inactivity.

Reset: Allows you to reset the system settings or delete all user

data (Restoring All Default Settings, page 14).

About: Displays the software version and unit ID, and allows

you to check for software updates (Viewing E-label

Regulatory and Compliance Information, page 14).

Changing the Device Language

Hold .

Select System > Language.

Using the Backlight

You can select any key to turn on the backlight.

Hold .

Select System > Backlight.

Select an option:

• To adjust the timeout, select Timeout.

• To adjust the brightness, select Brightness.

• To set the backlight to turn on for key presses and alerts,

select Keys and Alerts.

Use and to select an option.

Select .

Turning the Device Tones On and Off

Hold .

Select System > Sounds.

Changing the Units of Measure

You can customize units of measure for distance and speed.

Hold .

Select System > Units.

Using the Auto Power Off Feature

This feature automatically turns off the device after 10 minutes

of inactivity.

Hold .

Select System > Auto Power Off.

Setting Up Extended Display Mode

You can use your Edge 130 Plus device as an extended display

to view data screens from a compatible Garmin multisport

watch. For example, you can pair a compatible Forerunner

device to display its data screens on your Edge device during a

triathlon.

From your Edge device, hold .

Select Extended Display > .

From your compatible Garmin watch, select Settings >

Sensors & Accessories > Add New > Extended Display.

Follow the on-screen instructions on your Edge device and

Garmin watch to complete the pairing process.

The data screens from your paired watch appear on the Edge

device when the devices are paired.

NOTE: Normal Edge device functions are disabled while

using Extended Display mode.

After pairing your compatible Garmin watch with your Edge

device, they connect automatically the next time you use

Extended Display mode.

Exiting Extended Display Mode

While the device is in Extended Display mode, hold .

Select Exit Extended Display > Yes.

12 Customizing Your Device

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin EDGE 130 PLUS Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin EDGE 130 PLUS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info