Bedienungsanleitung Garmin Edge 820 (Seite 16 von 30) (Englisch)

657429

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

centers can provide a test that measures maximum heart rate.

The default maximum heart rate is 220 minus your age.

Tips for Erratic Heart Rate Data

If the heart rate data is erratic or does not appear, you can try

these tips.

• Reapply water to the electrodes and contact patches.

• Tighten the strap on your chest.

• Warm up for 5–10 minutes.

• Follow the care instructions (Caring for the Heart Rate

Monitor, page 19).

• Wear a cotton shirt or thoroughly wet both sides of the strap.

Synthetic fabrics that rub or flap against the heart rate

monitor can create static electricity that interferes with heart

rate signals.

• Move away from sources that can interfere with your heart

rate monitor.

Sources of interference may include strong electromagnetic

fields, some 2.4 GHz wireless sensors, high-voltage power

lines, electric motors, ovens, microwave ovens, 2.4 GHz

cordless phones, and wireless LAN access points.

Installing the Speed Sensor

NOTE: If you do not have this sensor, you can skip this task.

TIP: Garmin recommends you secure your bike on a stand while

installing the sensor.

Place and hold the speed sensor on top of the wheel hub.

Pull the strap

around the wheel hub, and attach it to the

hook

on the sensor.

The sensor may be tilted when installed on an asymmetrical

hub. This does not affect operation.

Rotate the wheel to check for clearance.

The sensor should not contact other parts of your bike.

NOTE: The LED flashes green for five seconds to indicate

activity after two revolutions.

Installing the Cadence Sensor

NOTE: If you do not have this sensor, you can skip this task.

TIP: Garmin recommends you secure your bike on a stand while

installing the sensor.

Select the band size that fits your crank arm

securely.

The band you select should be the smallest one that

stretches across the crank arm.

On the non-drive side, place and hold the flat side of the

cadence sensor on the inside of the crank arm.

Pull the bands

around the crank arm, and attach them to

the hooks

on the sensor.

Rotate the crank arm to check for clearance.

The sensor and bands should not contact any part of your

bike or shoe.

NOTE: The LED flashes green for five seconds to indicate

activity after two revolutions.

Take a 15 minute test ride and inspect the sensor and bands

to ensure there is no evidence of damage.

About the Speed and Cadence Sensors

Cadence data from the cadence sensor is always recorded. If no

speed and cadence sensors are paired with the device, GPS

data is used to calculate the speed and distance.

Cadence is your rate of pedaling or “spinning” measured by the

number of revolutions of the crank arm per minute (rpm).

Data Averaging for Cadence or Power

The non-zero data-averaging setting is available if you are

training with an optional cadence sensor or power meter. The

default setting excludes zero values that occur when you are not

pedaling.

You can change the value of this setting (Data Recording

Settings, page 18).

Pairing Your ANT+ Sensors

Before you can pair, you must put on the heart rate monitor or

install the sensor.

Pairing is the connecting of ANT+ wireless sensors, for example,

connecting a heart rate monitor with your Garmin device.

Bring the device within 3 m (10 ft.) of the sensor.

NOTE: Stay 10 m (33 ft.) away from other riders' ANT+

sensors while pairing.

Select > Settings > Sensors > Add Sensor.

Select an option:

• Select a sensor type.

• Select Search All to search for all nearby sensors.

A list of available sensors appears.

Select one or more sensors to pair with your device.

Select Add.

When the sensor is paired with your device, the sensor status

is Connected. You can customize a data field to display

sensor data.

Training with Power Meters

• Go to www.garmin.com/intosports for a list of ANT+ sensors

that are compatible with your device (such as Vector

™

• For more information, see the owner's manual for your power

meter.

• Adjust your power zones to match your goals and abilities

(Setting Your Power Zones, page 13).

• Use range alerts to be notified when you reach a specified

power zone (Setting Range Alerts, page 16).

• Customize the power data fields (Customizing the Data

Screens, page 16).

12 ANT+ Sensors

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Edge 820 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info