Bedienungsanleitung Garmin Edge 830 (Seite 13 von 50) (Englisch)

691268

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

TIP: Holding the handrails of the treadmill reduces accuracy.

You can use an optional foot pod to record pace, distance, and

cadence.

When cycling with GPS turned off, speed and distance are not

available unless you have an optional sensor that sends speed

and distance data to the device (such as a speed or cadence

sensor).

Calibrating the Treadmill Distance

To record more accurate distances for your treadmill runs, you

can calibrate the treadmill distance after you run at least 1.5 km

(1 mi.) on a treadmill. If you use different treadmills, you can

manually calibrate the treadmill distance on each treadmill or

after each run.

Start a treadmill activity (Starting an Activity, page 6), and run

at least 1.5 km (1 mi.) on the treadmill.

After you complete your run, select .

Select an option:

• To calibrate the treadmill distance the first time, select

Save.

The device prompts you to complete the treadmill

calibration.

• To manually calibrate the treadmill distance after the first-

time calibration, select Calibrate & Save > Yes.

Check the treadmill display for the distance traveled, and

enter the distance on your device.

Recording a Strength Training Activity

You can record sets during a strength training activity. A set is

multiple repetitions (reps) of a single move.

From the watch face, select > Strength.

The first time you record a strength training activity, you will

select which wrist your watch is on.

Select to start the set timer.

Start your first set.

The device counts your reps. Your rep count appears when

you complete at least six reps.

TIP: The device can only count reps of a single move for

each set. When you want to change moves, you should finish

the set and start a new one.

Select BACK to finish the set.

The watch displays the total reps for the set. After several

seconds, the rest timer appears.

If necessary, hold MENU, select Edit Last Set, and edit the

number of reps.

TIP: You can also add the weight used for the set.

When you are done resting, select BACK to start your next

set.

Repeat for each strength training set until your activity is

complete.

After your last set, select to stop the set timer.

Select Save.

Outdoor Activities

The Descent device comes preloaded with outdoor activities,

such as running and cycling. GPS is turned on for outdoor

activities. You can add new activities based on default activities,

such as walking or rowing. You can also add custom activities to

your device (Creating a Custom Activity, page 6).

Viewing Your Ski Runs

Your device records the details of each downhill skiing or

snowboarding run using the auto run feature. This feature is

turned on by default for downhill skiing and snowboarding. It

automatically records new ski runs based on your movement.

The timer pauses when you stop moving downhill and when you

are on a chairlift. The timer remains paused during the chairlift

ride. You can start moving downhill to restart the timer. You can

view run details from the paused screen or while the timer is

running.

Start a skiing or snowboarding activity.

Hold MENU.

Select View Runs.

Select UP and DOWN to view details of your last run, your

current run, and your total runs.

The run screens include time, distance traveled, maximum

speed, average speed, and total descent.

Using the Metronome

The metronome feature plays tones at a steady rhythm to help

you improve your performance by training at a faster, slower, or

more consistent cadence.

NOTE: This feature is not available for all activities.

From the watch face, select .

Select an activity.

Hold MENU.

Select the activity settings.

Select Metronome > Status > On.

Select an option:

• Select Beats / Minute to enter a value based on the

cadence you want to maintain.

• Select Alert Frequency to customize the frequency of the

beats.

• Select Sounds to customize the metronome tone and

vibration.

If necessary, select Preview to listen to the metronome

feature before you run.

Go for a run (Starting an Activity, page 6).

The metronome starts automatically.

During your run, select UP or DOWN to view the metronome

screen.

If necessary, hold MENU to change the metronome settings.

Jumpmaster

WARNING

The jumpmaster feature is for use by experienced skydivers

only. The jumpmaster feature should not be used as a primary

skydiving altimeter. Failure to input the appropriate jump related

information can lead to serious personal injury or death.

The jumpmaster feature follows military guidelines for

calculating the high altitude release point (HARP). The device

detects automatically when you have jumped to begin navigating

toward the desired impact point (DIP) using the barometer and

electronic compass.

Multisport

Triathletes, duathletes, and other multisport competitors can

take advantage of the multisport activities, such as Triathlon or

Swimrun. During a multisport activity, you can transition

between activities and continue to view your total time and

distance. For example, you can switch from biking to running

and view your total time and distance for biking and running

throughout the multisport activity.

You can customize a multisport activity, or you can use the

default triathlon activity set up for a standard triathlon.

Creating a Multisport Activity

From the watch face, select > Add > Multisport.

Select a multisport activity type, or enter a custom name.

Activities and Apps 7

Wie bekomme ich die Anzeige der Steigung auf den Hauptdisplay Eingereicht am 8-6-2023 16:06
Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Lesen Sie zuerst die Anleitung;
Schauen Sie nach, ob die Frage bereits gestellt wurde;
Stellen Sie die Frage so deutlich wie nur einigermaßen möglich;
Erwähnen Sie was Sie bereits versucht haben um das Problem zu lösen;
Ist Ihr Problem von einem Besucher gelöst dann lassen Sie ihn / sie wissen in diesem Forum;
Falls Sie reagieren möchten, so verwenden Sie bitte das Antworten- Formular;
Da ihre Frage für alle Besucher sichtbar ist, sollten Sie lieber keine persönliche Daten erwähnen.

Neu registrieren

Registrieren auf E - Mails für Garmin Edge 830 wenn:

neue Frage gestellt werden
neue Handbücher vorhanden sind

Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.

Andere Handbücher von Garmin Edge 830

Garmin Edge 830 Bedienungsanleitung - Deutsch - 40 seiten

Garmin Edge 830 Bedienungsanleitung - Holländisch - 38 seiten

Garmin Edge 830 Bedienungsanleitung - Französisch - 40 seiten

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.

Garmin Edge 830 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.