Bedienungsanleitung Garmin eTrex 22x (Seite 8 von 18) (Englisch)

691372

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

Navigating with the Map

NOTICE

The maps included on your device can create pedestrian or

cycling routes using roads and trails, but not routes for

automobile navigation.

Begin navigating to a destination.

Select Map.

represents your location on the map. Your route is marked

with a colored line.

Complete one or more actions:

• Use the Thumb Stick controller to move the cursor on the

map to view different areas.

• To zoom in and out of the map, select and .

Changing the Map Orientation

From the map, select menu.

Select Setup Map > Orientation.

Select an option:

• Select North Up to show north at the top of the page.

• Select Track Up to show your current direction of travel at

the top of the page.

• Select Automotive Mode to show an automotive

perspective with the direction of travel at the top.

Measuring Distance on the Map

You can measure the distance between two locations.

From the map, select a location.

Select menu > Measure Distance.

Move the pin to another location on the map.

Map Settings

Select Setup > Map.

Orientation: Adjusts how the map is shown on the page. North

Up shows north at the top of the page. Track Up shows a top-

down view with your current direction of travel toward the top

of the page. Automotive Mode shows an 3D automotive view

with the direction of travel at the top.

Data Fields: Customizes the data fields and dashboards of the

map, compass, elevation plot, and trip computer.

Advanced Map Setup: Enables you to open advanced map

settings (Map Settings, page 4).

Map Information: Enables or disables the maps currently

loaded on the device.

Advanced Map Settings

Select Setup > Map > Advanced Map Setup.

Auto Zoom: Automatically selects the appropriate zoom level

for optimal use on your map. When Off is selected, you must

zoom in or out manually.

Zoom Levels: Adjusts the zoom level at which map items will

appear. The map items will not appear when the map zoom

level is higher than the selected level.

Text Size: Selects the text size for map items.

Detail: Selects the amount of detail shown on the map. Showing

more detail may cause the map to redraw more slowly.

Shaded Relief: Shows detail relief on the map (if available) or

turns off shading.

Compass

When navigating, points to your destination, regardless of the

direction you are moving. When points toward the top of the

electronic compass, you are traveling directly toward your

destination. If points any other direction, turn until it points

toward the top of the compass.

Calibrating the Compass

The device has a 3-axis electronic compass (eTrex 32x devices

only). You should calibrate the compass after moving long

distances, experiencing temperature changes, or changing the

batteries.

Go outside, away from objects that influence magnetic fields,

such as cars, buildings, or overhead power lines.

From the compass, select menu.

Select Calibrate Compass > Start.

Follow the on-screen instructions.

Navigating with the Compass

When navigating to a destination, points to your destination,

regardless of the direction you are moving.

Begin navigating to a destination (Navigating to a

Destination, page 3).

Select Compass.

Turn until points toward the top of the compass, and

continue moving in that direction to the destination.

Course Pointer

The course pointer is most useful when you are navigating on

water or where there are no major obstacles in your path. It can

also help you avoid hazards near the course, such as shoals or

submerged rocks.

To enable the course pointer, from the compass, select menu >

Setup Heading > Go To Line/Pointer > Course (CDI).

The course pointer indicates your relationship to the course

line leading to the destination. The course deviation indicator

(CDI) provides the indication of drift (right or left) from the

course. The scale refers to the distance between dots on

the course deviation indicator, which tell you how far off course

you are.

Elevation Plot

NOTE: The elevation plot is available only with eTrex 32x

devices.

By default, the elevation plot displays the elevation over the

distance traveled. You can customize elevation plot settings

(Elevation Plot Settings, page 4). You can select any point on

the plot to view details about that point.

Calibrating the Barometric Altimeter

You can manually calibrate the barometric altimeter if you know

the correct elevation or the correct barometric pressure.

Go to a location where the elevation or barometric pressure

is known.

Select Elevation Plot > menu > Calibrate Altimeter.

Follow the on-screen instructions.

Elevation Plot Settings

From the elevation plot, select menu.

Change Plot Type: Sets the type of data shown on the

elevation plot. .

Adjust Zoom Ranges: Adjusts the zoom ranges shown on the

altimeter page.

4 Navigation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin eTrex 22x Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin eTrex 22x

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info