Bedienungsanleitung Garmin Fenix (Seite 3 von 4) (Englisch)

501903

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

2Select Start GPS.

3Wait while the device locates satellites.

4Select the Orange key.

5Select Waypoints, and select a waypoint from the list.

6Select Go.

The device displays time to destination À, distance to

destination Á, and estimated time of arrival Â.

7Select to view the compass page.

The two pointer marks Ã serve as a bearing pointer. The top

orange mark Ä points in the direction you are facing.

8Align the pointer marks with the top orange mark.

9Continue to walk in that direction until you reach the

destination.

Navigating Using TracBack®

While navigating, you can navigate back to the beginning of

your track. This can be helpful when finding your way back to

camp or the trail head.

1Select the Orange key.

2Select Tracks > Current > TracBack.

Your current location À, track to follow Á, and end point Â

appear on the map.

Stopping Navigation

1Select the Orange key.

2Select Stop Nav..

ANT+™ Sensors

Your device can be used with wireless ANT+ sensors. For more

information about compatibility and purchasing optional

sensors, go to http://buy.garmin.com.

Putting On the Heart Rate Monitor

NOTE: If you do not have a heart rate monitor, you can skip this

task.

You should wear the heart rate monitor directly on your skin,

just below your breastplate. It should be snug enough to stay in

place during your activity.

1Snap the heart rate monitor module À onto the strap.

2Wet both electrodes Á on the back of the strap to create a

strong connection between your chest and the transmitter.

3If the heart rate monitor has a contact patch Â, wet the

contact patch.

4Wrap the strap around your chest, and connect the strap

hook Ã to the loop.

The Garmin® logo should be right-side up.

5Bring the device within range (3 m) of the heart rate monitor.

After you put on the heart rate monitor, it is on standby and

ready to send data.

Pairing Your ANT+ Sensors

Before you can pair, you must put on the heart rate monitor or

install the sensor.

Pairing is the connecting of ANT+ wireless sensors, for

example, connecting a heart rate monitor with your Garmin

device.

1Bring the device with range (3 m) of the sensor.

NOTE: Stay 10 m away from other ANT+ sensors while

pairing.

2Select the Orange key.

3Select Setup > ANT Sensor.

4Select your sensor.

5Select New Search.

When the sensor is paired with your device, the sensor

status changes from Searching to Connected. Sensor data

appears in the data page loop or a custom data field.

Troubleshooting

Getting the Owner's Manual

You can get the latest owner's manual from the web.

1Go to www.garmin.com/support.

2Select Manuals.

3Follow the on-screen instructions to select your product.

Locking the Keys

You can lock the keys to prevent inadvertent key presses.

1Select the data page you want to view while the keys are

locked.

2Hold and to lock the keys.

3Hold and to unlock the keys.

Resetting Your Device

If the device stops responding, you may need to reset it.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Fenix Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Fenix

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info