Bedienungsanleitung Garmin Fenix (Seite 10 von 22) (Englisch)

501903

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

Altimeter and Barometer

The device contains an internal altimeter and barometer.

• On Demand sensor data (page 1)

• Always On sensor data (page 2)

• Altimeter settings (page 9)

• Altimeter and barometric readings (page 15)

Calibrating the Barometric Altimeter

Your device was already calibrated at the factory, and the

device uses automatic calibration at your GPS starting point by

default. You can manually calibrate the barometric altimeter if

you know the correct elevation or the correct sea level pressure.

1Select the Orange key.

2Select Setup > Sensors > Altimeter.

3Select an option:

• Select Auto Cal. > At Start to calibrate automatically from

your GPS starting point.

• Select Auto Cal. > Continuous to calibrate automatically

with periodic GPS calibration updates.

• Select Calibrate to enter the current elevation or sea-

level pressure.

Tracking Weather Changes Overnight

You can use your device to track changes in barometric

pressure over time. Increases in barometric pressure usually

indicate good weather, and decreases in barometric pressure

usually indicate bad weather.

1Select the Orange key.

2Select Setup > Sensors > Mode > Always On.

3Select repeatedly to return to the time of day page.

4Select repeatedly until the barometric data page appears.

The current barometric pressure appears in large numbers,

and the range of previous readings for the graph shown

appears in small numbers at the bottom of the page.

5Compare the current reading with earlier readings to see if

the barometric pressure is increasing or decreasing.

Marking and Starting Navigation to a Man

Overboard Location

You can save a man overboard (MOB) location, and

automatically start navigation back to it. You can customize the

hold function of the or key to access the MOB function

quickly (page 8).

1Select the Orange key.

2Select GPS Tools > MOB > Start.

The map page opens showing the route to the MOB location.

3Navigate using the compass (page 5) or map (page 5).

Geocaches

A geocache is like a hidden treasure. Geocaching is when you

hunt for hidden treasures using GPS coordinates posted online

by those hiding the geocache.

Downloading Geocaches

1Connect your device to a computer using the USB cable.

2Go to www.opencaching.com.

3If necessary, create an account.

4Sign in.

5Follow the on-screen instructions to find and download

geocaches to your device.

Navigating to a Geocache

Before you can navigate to a geocache, you must go to

www.opencaching.com, and download a geocache to your

device.

Navigating to a geocache is like navigating to any other

location.

• See the navigation section (page 5) for more information.

• Go to the profiles section (page 2) to create a profile for

geocaching.

• Go to the geocache settings (page 10) to customize your

device settings.

• Go to the data pages section (page 8) to customize your

data fields.

Logging the Attempt

After you have attempted to find a geocache, you can log your

results.

1Select the Orange key.

2Select GPS Tools > Geocaches > Log Attempt.

3Select Found, Did Not Find, or Unattempted.

4Select an option:

• To begin navigation to a geocache nearest you, select

Find Next.

• To end the logging, select Done.

chirp™

A chirp is a small Garmin accessory that is programmed and left

in a geocache. You can use your device to find a chirp in a

geocache. For more information about the chirp, see the chirp

Owner's Manual at www.garmin.com.

Finding a Geocache with a chirp

1Select the Orange key.

2Select Setup > Geocaches > chirp > On.

3Hold .

4Select Start GPS.

5Wait while the device locates satellites.

6Select the Orange key.

7Select GPS Tools > Geocaches.

8Select a geocache, and select chirp to show chirp details

while you are navigating.

9Select Go, and navigate to the geocache (page 3).

When you are within 32.9 ft. (10 m) of the geocache that

contains a chirp, a message appears.

Applications

Clock

Setting the Alarm

1Select the Orange key.

2Select Clock > Alarm Clock > Add Alarm.

3Use the Orange key, , and to set the time.

4Select Tone, Vibration, or Tone & Vib..

5Select Once, Daily, or Weekdays.

Starting the Countdown Timer

1Select the Orange key.

2Select Clock > Timer.

3Select the Orange key, , and to set the time.

6 Geocaches

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Fenix Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Fenix

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info