Bedienungsanleitung Garmin Fleet 660 (Seite 17 von 22) (Englisch)

674211

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

Battery type Rechargeable lithium-ion, 3.7 Vdc

Input Maximum DC 5 V, 2 A

Charging the Device

NOTE: This Class III product shall be powered by an LPS

power supply.

You can charge the battery in the device using any of these

methods.

• Connect the device to the vehicle power cable.

• Connect the device to a computer using a USB cable.

The device may charge slowly when connected to a

computer. Some portable computers may not charge the

device.

• Connect the device to an optional power adapter accessory,

such as a wall power adapter.

You can purchase an approved Garmin AC-DC adapter

suitable for home or office use from a Garmin dealer or

www.garmin.com.

Device Care

NOTICE

Avoid dropping your device.

Do not store the device where prolonged exposure to extreme

temperatures can occur, because it can cause permanent

damage.

Never use a hard or sharp object to operate the touchscreen, or

damage may result.

Do not expose the device to water.

Cleaning the Outer Casing

NOTICE

Avoid chemical cleaners and solvents that can damage plastic

components.

Clean the outer casing of the device (not the touchscreen)

using a cloth dampened with a mild detergent solution.

Wipe the device dry.

Cleaning the Touchscreen

Use a soft, clean, lint-free cloth.

If necessary, lightly dampen the cloth with water.

If using a dampened cloth, turn off the device and disconnect

the device from power.

Gently wipe the screen with the cloth.

Avoiding Theft

• Remove the device and mount from sight when not in use.

• Remove the residue left on the windshield by the suction

cup.

• Do not keep your unit in the glove compartment.

• Register your device at http://my.garmin.com.

Removing the Device, Mount, and Suction

Cup

Removing the Device from the Mount

Grip the device by the top and bottom.

Pull the bottom edge of the device toward you until it

releases from the magnet.

Pulling the device straight toward you may cause the mount

to release from the suction cup.

Removing the Mount from the Suction Cup

Turn the device mount to the right or left.

Apply pressure until the socket on the mount releases the

ball on the suction cup.

Removing the Suction Cup from the Windshield

Flip the lever on the suction cup toward you.

Pull the tab on the suction cup toward you.

Purchasing Additional Maps

Go to your device product page at (www.garmin.com).

Click the Maps tab.

Follow the on-screen instructions.

Purchasing Accessories

Go to http://buy.garmin.com.

Symbol Definitions

These symbols may appear on the device or accessory labels.

Alternating current. The device is suitable for alternating current.

Direct current. The device is suitable for direct current only.

Fuse. Indicates a fuse specification or location.

WEEE disposal and recycling symbol. The WEEE symbol is

attached to the product in compliance with the EU directive

2002/96/EC on Waste Electrical and Electronic Equipment

(WEEE). It is intended to deter the improper disposal of this

product and to promote reuse and recycling.

Troubleshooting

The suction cup will not stay on my

windshield

Clean the suction cup and windshield with rubbing alcohol.

Dry with a clean, dry cloth.

Mount the suction cup (Connecting the Device to Vehicle

Power).

My device is not acquiring satellite signals

• Verify the GPS simulator is turned off (Navigation Settings).

• Take your device out of parking garages and away from tall

buildings and trees.

• Remain stationary for several minutes.

The device does not charge in my vehicle

• Check the fuse in the vehicle power cable.

• Verify the vehicle is turned on and is supplying power to the

power outlet.

• Verify the interior temperature of the vehicle is between 32°

and 113°F (between 0° and 45°C).

• Verify that the fuse is not broken in the vehicle power outlet.

My battery does not stay charged for very

long

• Decrease the screen brightness (Display Settings).

• Shorten the display timeout (Display Settings).

• Decrease the volume (Adjusting the Volume).

• Disable Bluetooth wireless technology (Disabling Bluetooth).

• Put the device in sleep mode when not in use (Entering and

Exiting Sleep Mode).

• Keep your device away from extreme temperatures.

• Do not leave your device in direct sunlight.

Troubleshooting 13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Fleet 660 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Fleet 660

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info