Bedienungsanleitung Garmin Fleet 770 (Seite 15 von 24) (Englisch)

674189

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Select an option:

• Select Track Up to display the map in two dimensions (2-

D), with your direction of travel at the top.

• Select North Up to display the map in 2-D with north at

the top.

• Select 3-D to display the map in three dimensions.

Hands-Free Calling

NOTE: While most phones are supported and can be used, it

cannot be guaranteed that a particular phone can be used. All

features may not be available for your phone.

Using Bluetooth wireless technology, your device can connect to

your mobile phone to become a hands-free device. While

connected, you can place or receive calls using your device.

Pairing Your Phone

Before you can use hands-free calling, you must pair your

device with a compatible mobile phone.

Place your phone and your Garmin fleet device within 3 m

(10 ft.) of each other.

On your phone, enable Bluetooth wireless technology, and

set your phone to be visible or discoverable to other devices.

For more information, see the owner's manual for your

phone.

On your Garmin fleet device, select > Bluetooth.

Select the toggle switch to turn on Bluetooth technology.

A list of nearby Bluetooth devices appears.

Select your phone from the list.

If necessary, verify the code displayed on your phone

matches the code displayed on your Garmin fleet device.

Select Pair.

NOTE: To view contacts and call logs on your Garmin fleet

device, you may need to go to the Bluetooth settings on your

phone and enable the contact sharing permission for the paired

Garmin fleet device. For more information, see the owner's

manual for your phone.

Placing a Call

Select .

Select an option:

• To dial a number, select , enter the phone number, and

select .

• To call a recently dialed or received phone number, select

, and select a number.

• To call a contact from your phone book, select , and

select a contact.

Receiving a Call

When you receive a call, select Answer or Dismiss.

Using In-Call Options

In-call options appear when you answer a call. Some options

may not be compatible with your phone.

TIP: If you close the in-call options page, you can open it again

by selecting from the main menu.

• To set up a conference call, select .

• To transfer audio to your phone, select .

TIP: You can use this feature if you want to disconnect the

Bluetooth connection and remain on the call, or if you need

privacy.

• To use the dial pad, select .

TIP: You can use this feature to use automated systems,

such as voice mail.

• To mute the microphone, select .

• To hang up, select .

Saving a Phone Number as a Preset

You can save up to three contacts as presets on the dial pad.

This allows you to quickly call your home phone number, family

members, or frequently called contacts.

Select > .

Select a preset number, such as Preset 1, and select OK.

Select a contact.

Deleting a Paired Phone

You can delete a paired phone to prevent it from automatically

connecting to your device in the future.

Select > Bluetooth.

Select the phone, and select Unpair device.

Traffic

NOTICE

Garmin is not responsible for the accuracy or timeliness of the

traffic information.

Your device can provide information about traffic on the road

ahead or on your route. You can set your device to avoid traffic

when calculating routes, and to find a new route to your

destination if a large traffic delay occurs on your active route

(Traffic Settings, page 14). The traffic map allows you to

browse the map for traffic delays in your area.

To provide traffic information, your device must be connected to

a traffic-compatible power cable and within range of an over-the-

air traffic signal.

Traffic data is not available in all areas. For information about

traffic coverage areas, go to garmin.com/traffic.

Receiving Traffic Data Using a Traffic

Receiver

NOTICE

Heated (metallized) windshields could degrade the performance

of the traffic receiver.

Before you can receive traffic data using a traffic receiver, you

must have a traffic-compatible power cable. Go to garmin.com

/traffic for more information.

Your device can receive traffic signals from a station

broadcasting traffic data.

NOTE: In some areas, traffic information may be received from

FM radio stations using HD Radio

™

technology.

Connect the traffic-compatible power cable to an external

power source.

Connect the traffic-compatible power cable to the device.

When you are within a traffic coverage area, your device

displays traffic information.

Traffic Receiver Subscriptions

A regional traffic data subscription is included with most traffic

receivers. You can add subscriptions for additional regions to

your traffic receiver. For more information, go to garmin.com

/traffic.

Viewing Traffic Subscriptions

Select > Traffic > Subscriptions.

Hands-Free Calling 11

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Fleet 770 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Fleet 770

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info