Bedienungsanleitung Garmin Fleet 770 (Seite 20 von 24) (Englisch)

674189

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

This allows you to keep your device up to date without

connecting it to a computer.

Connect the device to a Wi‑Fi network (Connecting to a

Wireless Network, page 14).

While connected to a Wi‑Fi network, the device checks for

available updates automatically and displays a notification

when an update is available.

Select an option:

• When an update notification appears, swipe down from

the top of the screen, and select An update is available..

• To manually check for updates, select > About device

> System updates.

The device displays available map and software updates.

When an update is available, Update Available appears

below Map or Software.

Select an option:

• To install all available updates, select Download.

• To install only map updates, select Map.

• To install only software updates, select Software.

Read the license agreements, and select Accept All to

accept the agreements.

NOTE: If you do not agree with the license terms, you can

select Reject. This stops the update process. You cannot

install updates until you accept the license agreements.

Using a USB cable, connect the device to external power,

and select Continue (Charging the Device, page 15).

For the best results, a USB wall charger that provides at least

1 A power output is recommended. Many USB power

adapters for smartphones, tablets, or portable media devices

may be compatible.

Keep the device connected to external power and within

range of the Wi‑Fi network until the update process is

complete.

TIP: If a map update is interrupted or canceled before it

completes, your device may be missing map data. To repair

missing map data, you must update the maps again.

Device Care

NOTICE

Avoid dropping your device.

Do not store the device where prolonged exposure to extreme

temperatures can occur, because it can cause permanent

damage.

Never use a hard or sharp object to operate the touchscreen, or

damage may result.

Do not expose the device to water.

Cleaning the Outer Casing

NOTICE

Avoid chemical cleaners and solvents that can damage plastic

components.

Clean the outer casing of the device (not the touchscreen)

using a cloth dampened with a mild detergent solution.

Wipe the device dry.

Cleaning the Touchscreen

Use a soft, clean, lint-free cloth.

If necessary, lightly dampen the cloth with water.

If using a dampened cloth, turn off the device and disconnect

the device from power.

Gently wipe the screen with the cloth.

Avoiding Theft

• Remove the device and mount from sight when not in use.

• Remove the residue left on the windshield by the suction cup.

• Do not keep your unit in the glove compartment.

• Register your device using the Garmin Express software

(garmin.com/express).

Changing the Fuse in the Vehicle Power

Cable

NOTICE

When replacing the fuse, do not lose any of the small pieces

and make sure they are put back in the proper position. The

vehicle power cable does not work unless it is assembled

correctly.

If your device does not charge in your vehicle, you may need to

replace the fuse located at the tip of the vehicle adapter.

Rotate the end piece

counter clockwise to unlock it.

TIP: You may need to use a coin to remove the end piece.

Remove the end piece, the silver tip

, and the fuse

Insert a new fast-blow fuse that has the same current, such

as 1 A or 2 A.

Place the silver tip in the end piece.

Push in the end piece and rotate it clockwise to lock it back

into the vehicle power cable

Resetting the Device

You can reset your device if it stops functioning.

Hold the power key for 12 seconds.

Removing the Device, Mount, and Suction

Cup

Removing the Mount from the Suction Cup

Turn the device mount to the right or left.

Apply pressure until the socket on the mount releases the

ball on the suction cup.

Removing the Suction Cup from the Windshield

Flip the lever on the suction cup toward you.

Pull the tab on the suction cup toward you.

Troubleshooting

The suction cup will not stay on my

windshield

Clean the suction cup and windshield with rubbing alcohol.

Dry with a clean, dry cloth.

Mount the suction cup (Mounting and Powering the Garmin

fleet Device in Your Vehicle, page 1).

My device is not acquiring satellite signals

• Verify the GPS simulator is turned off (Route Preference

Settings, page 14).

• Take your device out of parking garages and away from tall

buildings and trees.

• Remain stationary for several minutes.

16 Troubleshooting

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Fleet 770 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Fleet 770

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info