801342
12
Zoom out
Zoom in
Vorherige Seite
1/122
Nächste Seite
FORERUNNER® 265 SERIES WATCH
Owner’s Manual
© 2023 Garmin Ltd. or its subsidiaries
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change
or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to
www.garmin.com for current updates and supplemental information concerning the use of this product.
Garmin®, the Garmin logo, ANT+®, Auto Lap®, Auto Pause®, Edge®, Forerunner®, TracBack®, VIRB®, and Virtual Partner® are trademarks of Garmin Ltd. or its subsidiaries, registered
in the USA and other countries. Body Battery, Connect IQ, Firstbeat Analytics, Garmin Connect, Garmin Express, Garmin Index, Garmin Move IQ, Garmin Pay, Health
Snapshot, HRM-Dual, HRM-Run, HRM-Pro series, HRM-Swim, HRM-Tri, PacePro, Rally, SatIQ, tempe, Varia, and Vector are trademarks of Garmin Ltd. or its
subsidiaries. These trademarks may not be used without the express permission of Garmin.
Android is a trademark of Google Inc. Apple®, iPhone®, iTunes®, and Mac® are trademarks of Apple Inc., registered in the U.S. and other countries. The BLUETOOTH® word mark and
logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Garmin is under license. The Cooper Institute®, as well as any related trademarks, are the property of The
Cooper Institute. Advance heartbeat analytics by Firstbeat. iOS® is a registered trademark of Cisco Systems, Inc. used under license by Apple Inc. Shimano STEPS is a registered
trademark of Shimano, Inc. WiFi® is a registered mark of Wi-Fi Alliance Corporation. Windows® and Windows NT® are registered trademarks of Microsoft Corporation in the United
States and other countries. Zwift is a trademark of Zwift, Inc. Other trademarks and trade names are those of their respective owners.
This product is ANT+® certified. Visit www.thisisant.com/directory for a list of compatible products and apps.
M/N: A04452, A04453
Table of Contents
Introduction......................................1
Setting Up Your Watch............................ 1
Overview.................................................. 1
GPS Status and Status Icons................. 2
Enabling and Disabling the
Touchscreen............................................ 3
Using the Watch...................................... 3
Activities and Apps...........................3
Starting an Activity.................................. 3
Tips for Recording Activities.............. 3
Stopping an Activity............................ 4
Evaluating an Activity.......................... 4
Outdoor Activities....................................4
Going for a Run.................................... 5
Going for a Track Run......................... 6
Tips for Recording a Track Run...... 6
Recording an Ultra Run Activity.......... 6
Triathlon Training................................ 7
Creating a Multisport Activity............. 7
Using an eBike..................................... 7
Viewing Your Ski Runs........................ 7
Swimming................................................ 7
Swimming in Open Water................... 8
Going for a Pool Swim........................ 8
Tips for Swimming Activities.............. 8
Swim Terminology...............................9
Stroke Types........................................ 9
Auto Rest and Manual Rest................ 9
Training with the Drill Log................... 9
Indoor Activities.................................... 10
Going for a Virtual Run...................... 10
Calibrating the Treadmill Distance... 10
Health Snapshot™............................. 10
Recording a Strength Training
Activity............................................... 11
Tips for Recording Strength Training
Activities.........................................11
Recording a HIIT Activity.................. 12
HIIT Timers.................................... 12
Using an Indoor Trainer.................... 12
Customizing Activities and Apps......... 12
Adding or Removing a Favorite
Activity............................................... 13
Changing the Order of an Activity in
the Apps List...................................... 13
Creating a Custom Activity............... 13
Appearance.................................... 13
Watch Face Settings............................. 13
Customizing the Watch Face............14
Glances.................................................. 14
Viewing the Glance Loop.................. 16
Customizing the Glance Loop.......... 17
Creating Glance Folders................17
Body Battery...................................... 17
Viewing the Body Battery
Glance............................................ 18
Tips for Improved Body Battery
Data................................................ 18
Viewing the Heart Rate Glance......... 19
Viewing the Weather Glance.............19
Women's Health................................ 19
Menstrual Cycle Tracking............. 19
Pregnancy Tracking.......................19
Using the Stress Level Glance.......... 20
Performance Measurements............20
About VO2 Max. Estimates........... 21
Viewing Your Predicted Race
Times..............................................22
Heart Rate Variability Status.........23
Performance Condition................. 24
Lactate Threshold......................... 24
Viewing Your Power Curve............25
Syncing Activities and Performance
Measurements...............................25
Turning Off Performance
Notifications.................................. 25
Training Status.................................. 26
Training Status Levels................... 27
Acute Load..................................... 27
Recovery Time............................... 29
Pausing and Resuming Your
Training Status.............................. 30
Training Readiness............................31
Controls................................................. 32
Viewing the Controls Menu.............. 34
Customizing the Controls Menu.......35
GarminPay........................................ 35
Setting Up Your GarminPay
Wallet............................................. 35
Table of Contents i
Paying for a Purchase Using Your
Watch............................................. 35
Adding a Card to Your GarminPay
Wallet............................................. 36
Changing Your GarminPay
Passcode....................................... 36
Morning Report..................................... 36
Customizing Your Morning Report... 36
Training..........................................37
Training for a Race Event..................... 37
Race Calendar and Primary Race..... 37
Unified Training Status......................... 37
Health and Wellness Settings.............. 38
Auto Goal........................................... 38
Using the Move Alert......................... 38
Turning on the Move Alert............ 38
Sleep Tracking................................... 38
Using Automated Sleep
Tracking......................................... 39
Customizing Sleep Mode.............. 39
Using Do Not Disturb Mode.......... 39
Intensity Minutes............................... 39
Earning Intensity Minutes............. 39
Garmin Move IQ................................. 39
Workouts............................................... 40
Following a Workout From Garmin
Connect.............................................. 40
Creating a Custom Workout on Garmin
Connect.............................................. 40
Sending a Custom Workout to Your
Watch............................................. 40
Starting a Workout............................ 41
Following a Daily Suggested
Workout..............................................41
Turning Daily Suggested Workout
Prompts On and Off...................... 41
Following a Pool Swim Workout...... 42
Recording a Critical Swim Speed
Test.................................................42
Editing Your Critical Swim Speed
Result............................................. 42
Workout Execution Score................. 42
About the Training Calendar............. 43
Using Garmin Connect Training
Plans...............................................43
Adaptive Training Plans................ 43
Interval Workouts.................................. 44
Customizing an Interval Workout..... 44
Starting an Interval Workout............. 44
Stopping an Interval Workout........... 44
PacePro™ Training................................ 44
Downloading a PacePro Plan from
Garmin Connect.................................45
Starting a PacePro Plan.................... 46
Creating a PacePro Plan on Your
Watch................................................. 47
Using Virtual Partner®.......................... 47
Setting a Training Target...................... 48
Cancelling a Training Target.............48
Racing a Previous Activity.................... 48
Using the Metronome........................... 49
Enabling Self Evaluation....................... 49
Extended Display Mode........................ 49
History........................................... 49
Using History......................................... 50
Multisport History................................. 50
Personal Records.................................. 50
Viewing Your Personal Records....... 50
Restoring a Personal Record............ 51
Clearing Personal Records............... 51
Viewing Data Totals.............................. 51
Viewing Your Time in Each Heart Rate
Zone....................................................... 51
Deleting History..................................... 51
Data Management................................ 51
Deleting Files..................................... 52
Heart Rate Features........................52
Wrist-based Heart Rate.........................52
Wrist Heart Rate Monitor Settings... 52
Tips for Erratic Heart Rate Data....... 53
Turning Off the Wrist-based Heart
Rate Monitor...................................... 53
Heart Rate While Swimming.................53
Setting an Abnormal Heart Rate
Alert........................................................ 53
Broadcasting Heart Rate Data..............54
Pulse Oximeter...................................... 54
Getting Pulse Oximeter Readings.... 55
Turning On Pulse Oximeter Sleep
Tracking............................................. 55
Turning On All-Day Mode.................. 55
ii Table of Contents
Tips for Erratic Pulse Oximeter
Data.................................................... 55
Navigation...................................... 56
Courses.................................................. 56
Following a Course on Your
Device.................................................56
Creating a Course on Garmin
Connect.............................................. 56
Sending a Course to Your
Device............................................. 56
Viewing Course Details..................... 57
Saving Your Location............................ 57
Viewing and Editing Your Saved
Locations........................................... 57
Navigating to a Destination.................. 57
Navigating to Your Starting Point During
an Activity.............................................. 58
Stopping Navigation............................. 58
Map........................................................ 58
Adding a Map to an Activity..............58
Panning and Zooming the Map........ 59
Map Settings......................................59
Compass................................................59
Altimeter and Barometer...................... 59
Sensors and Accessories............... 59
Wireless Sensors...................................60
Pairing Your Wireless Sensors............. 61
HRM-Pro Running Pace and
Distance................................................. 61
Tips for Recording Running Pace and
Distance............................................. 61
Running Power...................................... 62
Running Power Settings....................62
Running Dynamics................................ 62
Training with Running Dynamics......63
Color Gauges and Running Dynamics
Data.................................................... 64
Ground Contact Time Balance
Data................................................ 64
Vertical Oscillation and Vertical
Ratio Data...................................... 65
Tips for Missing Running Dynamics
Data.................................................... 65
Chest Heart Rate While Swimming...... 65
Using an Optional Bike Speed or
Cadence Sensor.................................... 65
Training with Power Meters................. 66
Situational Awareness.......................... 66
Using the Varia Camera Controls..... 66
tempe..................................................... 66
VIRB Remote......................................... 66
Controlling a VIRB Action Camera... 67
Controlling a VIRB Action Camera
During an Activity.............................. 67
User Profile.................................... 67
Setting Up Your User Profile................. 68
Gender Settings................................. 68
Viewing Your Fitness Age................. 68
About Heart Rate Zones....................... 68
Fitness Goals..................................... 68
Setting Your Heart Rate Zones......... 69
Letting the Watch Set Your Heart Rate
Zones................................................. 69
Heart Rate Zone Calculations...........70
Setting Your Power Zones.................... 70
Detecting Performance Measurements
Automatically........................................ 70
Music............................................. 70
Downloading Personal Audio
Content.................................................. 71
Connecting to a Third-Party Provider...71
Downloading Audio Content from a
Third-Party Provider.......................... 71
Disconnecting from a Third-Party
Provider.............................................. 71
Connecting Bluetooth Headphones..... 72
Listening to Music.................................72
Music Playback Controls.................. 73
Controlling Music Playback on a
Connected Phone.............................. 73
Changing the Audio Mode................ 73
Connectivity................................... 74
Phone Connectivity Features............... 74
Pairing Your Phone............................74
Enabling Bluetooth Notifications..... 74
Viewing Notifications.................... 74
Receiving an Incoming Phone
Call.................................................. 75
Replying to a Text Message..........75
Managing Notifications.................75
Table of Contents iii
Turning Off the Bluetooth Phone
Connection.........................................75
Turning On and Off Phone Connection
Alerts.................................................. 75
Playing Audio Prompts During an
Activity............................................... 76
Wi‑Fi Connectivity Features.................. 76
Connecting to a Wi‑Fi Network......... 76
Phone Apps and Computer
Applications...........................................76
Garmin Connect.................................77
Using the Garmin Connect App.... 77
Using Garmin Connect on Your
Computer....................................... 78
Manually Syncing Data with Garmin
Connect.......................................... 78
Connect IQ Features......................... 78
Downloading Connect IQ
Features......................................... 78
Downloading Connect IQ Features
Using Your Computer.................... 78
Safety and Tracking Features......... 79
Adding Emergency Contacts................ 79
Adding Contacts....................................79
Turning Incident Detection On and
Off.......................................................... 80
Requesting Assistance......................... 80
Live Event Sharing................................. 80
Turning On Live Event Sharing......... 80
Clocks............................................ 81
Setting an Alarm....................................81
Editing an Alarm................................ 81
Using the Stopwatch............................. 82
Starting the Countdown Timer............. 82
Deleting a Timer................................ 83
Syncing the Time with GPS.................. 83
Setting the Time Manually.................... 83
Customizing Your Watch................ 83
Activities and App Settings.................. 83
Customizing the Data Screens......... 85
Adding a Map to an Activity..............85
Activity Alerts.....................................86
Setting an Alert.............................. 87
Enabling Auto Climb..........................87
GPS Settings...................................... 88
Sensors Settings................................... 88
Compass Settings............................. 88
Calibrating the Compass
Manually......................................... 88
Setting the North Reference......... 89
Altimeter Settings..............................89
Calibrating the Barometric
Altimeter.........................................89
Barometer Settings........................... 89
Calibrating the Barometer............. 89
Map Settings......................................... 90
Navigation Settings...............................90
Customizing Navigation Data
Screens.............................................. 90
Setting Up a Heading Bug................. 90
Setting Navigation Alerts.................. 90
Power Manager Settings...................... 90
System Settings.................................... 91
Time Settings.................................... 91
Setting Time Alerts........................ 91
Changing the Screen Settings.......... 92
Customizing the Hot Keys................ 92
Changing the Units of Measure........ 92
Device Information......................... 92
Viewing Device Information................. 92
Viewing E-label Regulatory and
Compliance Information................... 92
About the AMOLED Display.................. 93
Charging the Watch.............................. 93
Tips for Charging the Watch............. 93
Wearing the Watch................................ 94
Device Care............................................94
Cleaning the Watch........................... 95
Changing the Bands.............................. 95
Specifications........................................96
Battery Life Information.................... 96
Troubleshooting............................. 97
Product Updates................................... 97
Setting Up Garmin Express............... 97
Getting More Information..................... 97
Activity Tracking....................................97
My daily step count does not
appear................................................ 97
iv Table of Contents
My step count does not seem
accurate............................................. 97
The step counts on my watch and my
Garmin Connect account don't
match................................................. 98
The floors climbed amount does not
seem accurate................................... 98
My intensity minutes are flashing.... 98
Acquiring Satellite Signals.................... 98
Improving GPS Satellite Reception.. 98
Restarting the Watch............................ 98
Resetting All Default Settings...............99
Maximizing Battery Life........................ 99
My Device is in the Wrong Language...99
Is my phone compatible with my
watch?....................................................99
My phone will not connect to the
watch................................................... 100
The temperature reading is not
accurate............................................... 100
How can I manually pair sensors?..... 100
Can I use my Bluetooth sensor with my
watch?................................................. 100
My headphones will not connect to the
watch................................................... 101
My music cuts out or my headphones
won't stay connected.......................... 101
Appendix...................................... 102
Data Fields...........................................102
VO2 Max. Standard Ratings............... 112
FTP Ratings......................................... 112
Wheel Size and Circumference.......... 113
Table of Contents v
Introduction
WARNING
See the Important Safety and Product Information guide in the product box for product warnings and other
important information.
Always consult your physician before you begin or modify any exercise program.
Setting Up Your Watch
To take full advantage of the Forerunner features, complete these tasks.
Pair the Forerunner watch with your phone using the Garmin Connect app (Pairing Your Phone, page74).
Set up Wi‑Fi® networks (Connecting to a Wi‑Fi Network, page76).
Set up safety features (Safety and Tracking Features, page79).
Set up music (Music, page70).
Set up your GarminPay wallet (Setting Up Your GarminPay Wallet, page35).
Overview
Touchscreen
Tap to choose an option in a menu.
Tap to open the glance to view more data.
Swipe up or down to scroll through the glance loop and menus.
Swipe right to return to the previous screen.
Cover the screen with your palm to quickly turn off the display and return to the watch face.
LIGHT
Hold to turn the watch on.
Press to turn the display on and off.
Hold to view the controls menu for quick access to frequently used functions.
UP
Press to scroll through the glances, data screens, options, and settings.
Hold to view the menu.
Hold to manually change sports during an activity.
DOWN
Press to scroll through the glances, data screens, options, and settings.
Hold to open the music controls (Music, page70).
Introduction 1
START · STOP
Press to start and stop the activity timer.
Press to choose an option or to acknowledge a message.
BACK
Press to return to the previous screen.
Press to record a lap, rest, or transition during an activity.
GPS Status and Status Icons
For outdoor activities, the status bar turns green when GPS is ready. A flashing icon means the watch is
searching for a signal. A solid icon means the signal was found or the sensor is connected.
GPS GPS status
Battery status
Phone connection status
Wi‑Fi technology status
LiveTrack status
Heart rate status
Running Dynamics Pod status
Speed and cadence sensor status
Bike lights status
Bike radar status
Extended display mode status
Smart trainer status
Power meter status
tempe sensor status
VIRB® camera status
2 Introduction
Enabling and Disabling the Touchscreen
You can customize the touchscreen for general watch use and for each activity profile.
NOTE: The touchscreen is not available during swim activities. The touchscreen setting for each activity profile
(such as run or bike) applies to the corresponding leg of a multisport activity.
To enable or disable the touchscreen during general use or activities, hold UP, select System > Touch, and
select an option.
To add this option to the controls menu, see (Customizing the Controls Menu, page35).
To customize a hot key to temporarily enable or disable the touchscreen, hold UP, select System > Hot Keys.
Using the Watch
Hold LIGHT to view the controls menu (Controls, page32).
From the watch face, press UP or DOWN to scroll through the glance loop (Glances, page14).
From the watch face, press START to start an activity or open an app (Activities and Apps, page3).
Hold UP to customize the watch face (Customizing the Watch Face, page14), adjust settings (System
Settings, page91), pair wireless sensors (Pairing Your Wireless Sensors, page61), and more.
Activities and Apps
Your watch can be used for indoor, outdoor, athletic, and fitness activities. When you start an activity, the watch
displays and records sensor data. You can create custom activities or new activities based on default activities
(Creating a Custom Activity, page13). When you finish your activities, you can save and share them with the
Garmin Connect community.
You can also add Connect IQ activities and apps to your watch using the Connect IQ app (Connect IQ Features,
page78).
For more information about activity tracking and fitness metric accuracy, go to garmin.com/ataccuracy.
Starting an Activity
When you start an activity, GPSturns on automatically (if required).
1Press START.
2Select an option:
Select an activity from your favorites.
Select , and select an activity from the extended activity list.
3If the activity requires GPS signals, go outside to an area with a clear view of the sky, and wait until the watch
is ready.
The watch is ready after it establishes your heart rate, acquires GPSsignals (if required), and connects to
your wireless sensors (if required).
4Press START to start the activity timer.
The watch records activity data only while the activity timer is running.
Tips for Recording Activities
Charge the watch before starting an activity (Charging the Watch, page93).
Press BACK to record laps, start a new set or pose, or advance to the next workout step.
Press UP or DOWN to view additional data screens.
Swipe up or down to view additional data screens (Enabling and Disabling the Touchscreen, page3).
During an activity, hold UP, and select Change Sport to transition to a different activity type.
When your activity includes two or more sports, it is recorded as a multisport activity.
Activities and Apps 3
Stopping an Activity
1Press STOP.
2Select an option:
To resume your activity, select Resume.
To save the activity and view the details, select Save, press START, and select an option.
NOTE: After you save the activity, you can enter self-evaluation data (Evaluating an Activity, page4).
To suspend your activity and resume it at a later time, select Resume Later.
To mark a lap, select Lap.
To navigate back to the starting point of your activity along the path you traveled, select Back to Start >
TracBack.
NOTE: This feature is available only for activities that use GPS.
To navigate back to the starting point of your activity by the most direct path, select Back to Start >
Straight Line.
NOTE: This feature is available only for activities that use GPS.
To measure the difference between your heart rate at the end of the activity and your heart rate two
minutes later, select Recovery Heart Rate, and wait while the timer counts down.
To discard the activity, select Discard.
NOTE: After stopping the activity, the watch saves it automatically after 30 minutes.
Evaluating an Activity
NOTE: This feature is not available for all activities.
You can customize the self-evaluation setting for certain activities (Enabling Self Evaluation, page49).
1After you complete an activity, select Save (Stopping an Activity, page4).
2Select a number that corresponds with your perceived effort.
NOTE: You can select to skip the self evaluation.
3Select how you felt during the activity.
You can view evaluations in the Garmin Connect app.
Outdoor Activities
The Forerunner device comes preloaded with outdoor activities, such as running and cycling. GPS is turned on
for outdoor activities. You can add new activities based on default activities, such as walking or rowing. You can
also add custom activities to your device (Creating a Custom Activity, page13).
4 Activities and Apps
Going for a Run
The first fitness activity you record on your watch can be a run, ride, or any outdoor activity. You may need to
charge the watch before starting the activity (Charging the Watch, page93).
The watch records activity data only while the activity timer is running.
1Press START, and select an activity.
2Go outside, and wait while the watch locates satellites.
3Press START.
4Go for a run.
NOTE: During an activity, you can hold DOWN to open the music controls (Music Playback Controls,
page73).
5After you complete your run, press STOP.
6Select an option:
Select Resume to restart the activity timer.
Select Save to save the run and reset the activity timer. You can select the run to view a summary.
NOTE: For more run options, see Stopping an Activity, page4.
Activities and Apps 5
Going for a Track Run
Before you go for a track run, make sure you are running on a standard-shape, 400 m track.
You can use the track run activity to record your outdoor track data, including distance in meters and lap splits.
1Stand on the outdoor track.
2From the watch face, press START.
3Select Track Run.
4Wait while the watch locates satellites.
5If you are running in lane 1, skip to step 11.
6Press UP.
7Select the activity settings.
8Select Lane Number.
9Select a lane number.
10 Press BACK twice to return to the activity timer.
11 Press START.
12 Run around the track.
After you run 3 laps, your watch records the track dimensions and calibrates your track distance.
13 After you complete your activity, press STOP, and select Save.
Tips for Recording a Track Run
Wait until the GPS status indicator turns green before starting a track run.
During your first run on an unfamiliar track, run for a minimum of 3 laps to calibrate your track distance.
You should run slightly past your starting point to complete the lap.
Run each lap in the same lane.
NOTE: The default Auto Lap® distance is 1600 m, or 4 laps around the track.
If you are running in a lane other than lane 1, set the lane number in the activity settings.
Recording an Ultra Run Activity
1Press START.
2Select Ultra Run.
3Press START to start the activity timer.
4Start running.
5Press BACK to record a lap and start the rest timer.
NOTE: You can configure the Lap Key setting to record a lap and start the rest timer, start the rest timer only,
or record a lap only (Activities and Apps, page3).
6When you are done resting, press BACK to resume running.
7Press UP or DOWN to view additional data pages (optional).
8After you complete your activity, press STOP, and select Save.
6 Activities and Apps
Triathlon Training
When you participate in a triathlon, you can use the triathlon activity to quickly transition to each sport segment,
to time each segment, and to save the activity.
1Press START.
2Select Triathlon.
3Press START to start the activity timer.
4Press BACK at the beginning and end of each transition.
The transition feature is on by default, and the transition time is recorded separately from the activity time.
The transition feature can be turned on or off in the triathlon activity settings. If transitions are turned off,
press BACK to change sports.
5After you complete your activity, press STOP, and select Save.
Creating a Multisport Activity
1Press START.
2Select Add > Multisport.
3Select a multisport activity type, or enter a custom name.
Duplicate activity names include a number. For example, Triathlon(2).
4Select two or more activities.
5Select an option:
Select an option to customize specific activity settings. For example, you can select whether to include
transitions.
Select Done to save and use the multisport activity.
6Select to add the activity to your list of favorites.
Using an eBike
Before you can use a compatible eBike, such as a Shimano STEPS eBike, you must pair it with your Forerunner
device (Pairing Your Wireless Sensors, page61).
Viewing Your Ski Runs
Your watch records the details of each downhill skiing or snowboarding run using the auto run feature. This
feature is turned on by default for downhill skiing and snowboarding. It automatically records new ski runs
based on your movement. The activity timer pauses when you stop moving downhill and when you are on a
chairlift. The activity timer remains paused during the chairlift ride. You can start moving downhill to restart the
activity timer. You can view run details from the paused screen or while the activity timer is running.
1Start a skiing or snowboarding activity.
2Hold UP.
3Select View Runs.
4Press UP and DOWN to view details of your last run, your current run, and your total runs.
The run screens include time, distance traveled, maximum speed, average speed, and total descent.
Swimming
NOTICE
The device is intended for surface swimming. Scuba diving with the device may damage the product and will
void the warranty.
NOTE: The watch has wrist-based heart rate enabled for swim activities. The watch is also compatible with the
HRM-Pro series, HRM-Swim, and HRM-Tri accessories (Chest Heart Rate While Swimming, page65). If both
wrist-based heart rate and chest heart rate data are available, your watch uses the chest heart rate data.
Activities and Apps 7
Swimming in Open Water
You can record swim data including distance, pace, and stroke rate. You can add data screens to the default
open water swimming activity (Customizing the Data Screens, page85).
1Press START.
2Select Open Water.
3Go outside and wait while the watch locates satellites.
4Press START to start the activity timer.
5Start swimming.
6Press UP or DOWN to view additional data pages (optional).
7After you complete your activity, press STOP, and select Save.
Going for a Pool Swim
1Press START.
2Select Pool Swim.
3Select your pool size, or enter a custom size.
4Press START.
The device records swim data only while the activity timer is running.
5Start your activity.
The device automatically records swim intervals and lengths.
6Press UP or DOWN to view additional data pages (optional).
7When resting, press BACK to pause the activity timer.
8Press BACK to restart the activity timer.
9After you complete your activity, press STOP, and select Save.
Tips for Swimming Activities
Press BACK to record an interval during open water swimming.
Before starting a pool swimming activity, follow the on-screen instructions to select your pool size or enter a
custom size.
The watch measures and records distance by completed pool lengths. The pool size must be correct to
display accurate distance. The next time you start a pool swimming activity, the watch uses this pool size.
You can hold UP, select the activity settings, and select Pool Size to change the size.
For accurate results, swim the entire pool length, and use one stroke type for the entire length. Pause the
activity timer when resting.
Press BACK to record a rest during pool swimming (Auto Rest and Manual Rest, page9).
The watch automatically records swim intervals and lengths for pool swimming.
To help the watch count your lengths, use a strong push off the wall and glide before your first stroke.
When doing drills, you must either pause the activity timer or use the drill logging feature (Training with the
Drill Log, page9).
8 Activities and Apps
Swim Terminology
Length: One trip down the pool.
Interval: One or more consecutive lengths. A new interval starts after a rest.
Stroke: A stroke is counted every time your arm wearing the watch completes a full cycle.
Swolf: Your swolf score is the sum of the time for one pool length and the number of strokes for that length.
For example, 30 seconds plus 15 strokes equals a swolf score of 45. For open water swimming, swolf is
calculated over 25 meters. Swolf is a measurement of swimming efficiency and, like golf, a lower score is
better.
Critical swim speed (CSS): Your CSS is the theoretical speed that you can maintain continuously without
exhaustion. You can use your CSS to guide your training pace and monitor your improvement.
Stroke Types
Stroke type identification is available only for pool swimming. Your stroke type is identified at the end of a
length. Stroke types appear in your Garmin Connect account. You can also select stroke type as a custom data
field (Customizing the Data Screens, page85).
Free Freestyle
Back Backstroke
Breast Breaststroke
Fly Butterfly
Mixed More than one stroke type in an interval
Drill Used with drill logging (Training with the Drill Log, page9)
Auto Rest and Manual Rest
NOTE: Swim data is not recorded during a rest. To view other data screens, you can press UP or DOWN.
The auto rest feature is available only for pool swimming. Your watch automatically detects when you are
resting, and the rest screen appears. If you rest for more than 15 seconds, the watch automatically creates a
rest interval. When you resume swimming, the watch automatically starts a new swim interval. You can turn on
the auto rest feature in the activity options (Activities and Apps, page3).
TIP: For best results using the auto rest feature, minimize your arm motions while resting.
During a pool or open water swim activity, you can manually mark a rest interval by pressing BACK.
Training with the Drill Log
The drill log feature is available only for pool swimming. You can use the drill log feature to manually record kick
sets, one-arm swimming, or any type of swimming that is not one of the four major strokes.
1During your pool swim activity, press UP or DOWN to view the drill log screen.
2Press BACK to start the drill timer.
3After you complete a drill interval, press BACK.
The drill timer stops, but the activity timer continues to record the entire swim session.
4Select a distance for the completed drill.
Distance increments are based on the pool size selected for the activity profile.
5Select an option:
To start another drill interval, press BACK.
To start a swim interval, press UP or DOWN to return to the swim training screens.
Activities and Apps 9
Indoor Activities
The watch can be used for training indoors, such as running on an indoor track or using a stationary bike or
indoor trainer. GPS is turned off for indoor activities.
When running or walking with GPS turned off, speed and distance are calculated using the accelerometer in the
watch. The accelerometer is self-calibrating. The accuracy of the speed and distance data improves after a few
outdoor runs or walks using GPS.
TIP: Holding the handrails of the treadmill reduces accuracy.
When cycling with GPS turned off, speed and distance data are not available unless you have an optional sensor
that sends speed and distance data to the watch, such as a speed or cadence sensor.
Going for a Virtual Run
You can pair your watch with a compatible third-party app to transmit pace, heart rate, or cadence data.
1Press START.
2Select Virtual Run.
3On your tablet, laptop, or phone, open the Zwift app or another virtual training app.
4Follow the on-screen instructions to start a running activity and pair the devices.
5Press START to start the activity timer.
6After you complete your activity, press STOP, and select Save.
Calibrating the Treadmill Distance
To record more accurate distances for your treadmill runs, you can calibrate the treadmill distance after you run
at least 1.5km (1mi.) on a treadmill. If you use different treadmills, you can manually calibrate the treadmill
distance on each treadmill or after each run.
1Start a treadmill activity (Starting an Activity, page3).
2Run on the treadmill until your watch records at least 1.5km (1mi.).
3After you finish the activity, press STOP to stop the activity timer.
4Select an option:
To calibrate the treadmill distance the first time, select Save.
The device prompts you to complete the treadmill calibration.
To manually calibrate the treadmill distance after the first-time calibration, select Calibrate & Save > .
5Check the treadmill display for the distance traveled, and enter the distance on your watch.
Health Snapshot
The Health Snapshot feature is an activity on your watch that records several key health metrics while you hold
still for two minutes. It provides a glimpse of your overall cardiovascular status. The watch records metrics
such as your average heart rate, stress level, and respiration rate. You can add the Health Snapshot activity to
the list of your favorite activities (Activities and Apps, page3).
10 Activities and Apps
Recording a Strength Training Activity
You can record sets during a strength training activity. A set is multiple repetitions (reps) of a single move. You
can create and find strength workouts using Garmin Connect and send them to your watch.
1Press START.
2Select Strength.
The first time you record a strength training activity, you must select which wrist your watch is on.
3Select a workout.
NOTE: If you don't have any strength workouts downloaded to your watch, you can select Free > START, and
go to step 6.
4Press DOWN to view a list of workout steps (optional).
TIP: While viewing workout steps, you can press START to view an animation of the selected exercise, if
available.
5Press START > Do Workout > START > Start Workout to start the set timer.
6Start your first set.
The device counts your reps. Your rep count appears when you complete at least four reps.
TIP: The device can only count reps of a single move for each set. When you want to change moves, you
should finish the set and start a new one.
7Press BACK to finish the set.
The watch displays the total reps for the set. After several seconds, the rest timer appears.
8If necessary, edit the number of reps.
TIP: You can also add the weight used for the set.
9When you are done resting, press BACK to start your next set.
10 Repeat for each strength training set until your activity is complete.
11 After your last set, press STOP to stop the set timer.
12 Select Stop Workout > Save.
Tips for Recording Strength Training Activities
Do not look at the watch while performing reps.
You should interact with the watch at the beginning and end of each set, and during rests.
Focus on your form while performing reps.
Perform bodyweight or free weight exercises.
Perform reps with a consistent, wide range of motion.
Each rep is counted when the arm wearing the watch returns to the starting position.
NOTE: Leg exercises may not be counted.
Turn on automatic set detection to start and stop your sets.
Save and send your strength training activity to your Garmin Connect account.
You can use the tools in your Garmin Connect account to view and edit activity details.
Activities and Apps 11
Recording a HIIT Activity
You can use specialized timers to record a high-intensity interval training (HIIT) activity.
1Press START.
2Select HIIT.
3Select an option:
Select Free to record an open, unstructured HIIT activity.
Select HIIT Timers (HIIT Timers, page12).
Select Workouts to follow a saved workout.
4If necessary, follow the on-screen instructions.
5Press START to start your first round.
The device displays a countdown timer and your current heart rate.
6If necessary, press BACK to manually move to the next round or rest.
7After you complete your activity, press STOP, and select Save.
HIIT Timers
You can use specialized timers to record a high-intensity interval training (HIIT) activity.
AMRAP: The AMRAP timer records as many rounds as possible during a set time period.
EMOM: The EMOM timer records a set number of moves every minute on the minute.
Tabata: The Tabata timer alternates between 20-second intervals of maximum effort and 10 seconds of rest.
Custom: You can set your move time, rest time, number of moves, and number of rounds.
Using an Indoor Trainer
Before you can use a compatible indoor trainer, you must pair the trainer with your watch using ANT+®
technology (Pairing Your Wireless Sensors, page61).
You can use your watch with an indoor trainer to simulate resistance while following a course, ride, or workout.
While using an indoor trainer, GPS is turned off automatically.
1Press START.
2Select Bike Indoor.
3Hold UP.
4Select Smart Trainer Options.
5Select an option:
Select Free Ride to go for a ride.
Select Follow Workout to follow a saved workout (Workouts, page40).
Select Follow Course to follow a saved course (Courses, page56).
Select Set Power to set the target power value.
Select Set Grade to set the simulated grade value.
Select Set Resistance to set the resistance force applied by the trainer.
6Press START to start the activity timer.
The trainer increases or decreases resistance based on the elevation information in the course or ride.
Customizing Activities and Apps
You can customize the activities and apps list, data screens, data fields, and other settings.
12 Activities and Apps
Adding or Removing a Favorite Activity
The list of your favorite activities appears when you press START from the watch face, and it provides quick
access to the activities you use most frequently. You can add or remove favorite activities at any time.
1Hold UP.
2Select Activities & Apps.
Your favorite activities appear at the top of the list.
3Select an option:
To add a favorite activity, select the activity, and select Set as Favorite.
To remove a favorite activity, select the activity, and select Remove from Favorites.
Changing the Order of an Activity in the Apps List
1Hold UP.
2Select Activities & Apps.
3Select an activity.
4Select Reorder.
5Press UP or DOWN to adjust the position of the activity in the apps list.
Creating a Custom Activity
1Press START.
2Select Add.
3Select an option:
Select Copy Activity to create your custom activity starting from one of your saved activities.
Select Other to create a new custom activity.
4If necessary, select an activity type.
5Select a name or enter a custom name.
Duplicate activity names include a number, for example: Bike(2).
6Select an option:
Select an option to customize specific activity settings. For example, you can customize the data screens
or auto features.
Select Done to save and use the custom activity.
7Select to add the activity to your list of favorites.
Appearance
You can customize the appearance of the watch face and the quick access features in the glance loop and
controls menu.
Watch Face Settings
You can customize the appearance of the watch face by selecting the layout, colors, and additional data. You
can also download custom watch faces from the Connect IQ store.
Appearance 13
Customizing the Watch Face
Before you can activate a Connect IQ watch face, you must install a watch face from the Connect IQ store
(Connect IQ Features, page78).
You can customize the watch face information and appearance, or activate an installed Connect IQ watch face.
1From the watch face, hold UP.
2Select Watch Face.
3Press UP or DOWN to preview the watch face options.
4Select Add New to scroll through additional pre-loaded watch faces.
5Select START > Apply to activate a pre-loaded watch face or an installed Connect IQ watch face.
6If using a pre-loaded watch face, select START > Customize.
7Select an option:
To change the style of the numbers for the analog watch face, select Dial.
To change the style of the hands for the analog watch face, select Hands.
To change the style of the numbers for the digital watch face, select Layout.
To change the style of the seconds for the digital watch face, select Seconds.
To change the data that appears on the watch face, select Data.
To add or change an accent color for the watch face, select Accent Color.
To save the changes, select Done.
8To save all changes, select Apply.
Glances
Your watch comes preloaded with glances that provide quick information (Viewing the Glance Loop, page16).
Some glances require a Bluetooth® connection to a compatible phone.
Some glances are not visible by default. You can add them to the glance loop manually (Customizing the Glance
Loop, page17).
14 Appearance
Name Description
ABC Displays combined altimeter, barometer, and compass information.
Body BatteryWith all day wear, displays your current Body Battery level and a graph of your level for the
last several hours (Body Battery, page17).
Calendar Displays upcoming meetings from your phone calendar.
Calories Displays your calorie information for the current day.
Device usage Displays the current software version and device usage statistics.
Floors climbed Tracks your floors climbed and progress toward your goal.
Garmin® coach
Displays scheduled workouts when you select a Garmin coach adaptive training plan in
your Garmin Connect account. The plan adjusts to your current level of fitness, coaching
and schedule preferences, and race date.
Health Snapshot
Starts a Health Snapshot session on your watch that records several key health metrics
while you hold still for two minutes. It provides a glimpse of your overall cardiovascular
status. The watch records metrics such as your average heart rate, stress level, and
respiration rate.
Displays summaries of your saved Health Snapshot sessions (Health Snapshot, page10).
Heart rate Displays your current heart rate in beats per minute (bpm) and a graph of your average
resting heart rate (RHR).
History Displays your activity history and a graph of your recorded activities.
HRV Status Displays your seven-day average of your overnight heart rate variability (Heart Rate Varia
bility Status, page23).
Intensity minutes Tracks your time spent participating in moderate to vigorous activities, your weekly
intensity minutes goal, and progress toward your goal.
Last activity Displays a brief summary of your last recorded activity.
Last ride
Last run
Last swim
Displays a brief summary of your last recorded activity and history of the specified sport.
Music controls Provides music player controls for your phone or watch music.
Notifications Alerts you to incoming calls, texts, social network updates, and more, based on your phone
notification settings (Enabling Bluetooth Notifications, page74).
Performance Displays performance measurements that help you track and understand your training
activities and race performances (Performance Measurements, page20).
Primary race Displays the race event you designate as the primary race in your Garmin Connect
calendar (Race Calendar and Primary Race, page37).
Pulse oximeter
Allows you to take a manual pulse oximeter reading (Getting Pulse Oximeter Readings,
page55). If you are too active for the watch to determine your pulse oximeter reading, the
measurements are not recorded.
Race calendar Displays your upcoming race events set in your Garmin Connect calendar (Race Calendar
and Primary Race, page37).
Respiration Your current respiration rate in breaths per minute and seven-day average. You can do a
breathing activity to help you relax.
Appearance 15
Name Description
Sleep Displays total sleep time, a sleep score, and sleep stage information for the previous night.
Steps Tracks your daily step count, step goal, and data for previous days.
Stress
Displays your current stress level and a graph of your stress level. You can do a breathing
activity to help you relax. If you are too active for the watch to determine your stress level,
stress measurements are not recorded.
Sunrise and
sunset Displays sunrise, sunset, and civil twilight times.
Training
readiness
Displays a score and a short message that helps you determine how ready you are for
training each day (Training Readiness, page31).
Training status Displays your current training status and training load, which shows you how your training
affects your fitness level and performance (Training Status, page26).
VIRB controls Provides camera controls when you have a VIRB device paired with your Forerunner watch
(VIRB Remote, page66).
Weather Displays the current temperature and weather forecast.
Viewing the Glance Loop
Glances provide quick access to health data, activity information, built-in sensors, and more. When you pair your
watch, you can view data from your phone, such as notifications, weather, and calendar events.
1Press UP or DOWN.
The watch scrolls through the glance loop and displays summary data for each glance.
TIP: You can also swipe to scroll or tap to select options.
2Press START to view more information.
3Select an option:
Press DOWN to view details about a glance.
Press START to view additional options and functions for a glance.
16 Appearance
Customizing the Glance Loop
1Hold UP.
2Select Appearance > Glances.
3Select an option:
To change the location of a glance in the loop, select a glance, and press UP or DOWN.
To remove a glance from the loop, select a glance, and select .
To add a glance to the loop, select Add, and select a glance.
TIP: You can select Create Folder to create folders that contain multiple glances (Creating Glance Folders,
page17).
Creating Glance Folders
You can customize the glance loop to create folders of related glances.
1Hold UP.
2Select Appearance > Glances > Add > Create Folder.
3Select the glances to include in the folder, and select Done.
NOTE: If the glances are already in the glance loop, you can move or copy them into the folder.
4Select or enter a name for the folder.
5Select an icon for the folder.
6If necessary, select an option:
To edit the folder, scroll to the folder in the glance loop, and hold UP.
To edit the glances in the folder, open the folder and select Edit (Customizing the Glance Loop, page17).
Body Battery
Your watch analyzes your heart rate variability, stress level, sleep quality, and activity data to determine your
overall Body Battery level. Like a gas gauge on a car, it indicates your amount of available reserve energy. The
Body Battery level range is from 0 to 100, where 0 to 25 is low reserve energy, 26 to 50 is medium reserve
energy, 51 to 75 is high reserve energy, and 76 to 100 is very high reserve energy.
You can sync your watch with your Garmin Connect account to view your most up-to-date Body Battery level,
long-term trends, and additional details (Tips for Improved Body Battery Data, page18).
Appearance 17
Viewing the Body Battery Glance
The Body Battery glance displays your current Body Battery level and a graph of your Body Battery level for the
last several hours.
1Press UP or DOWN to view the Body Battery glance.
NOTE: You may need to add the glance to your glance loop (Customizing the Glance Loop, page17).
2Press START to view a graph of your body battery level since midnight.
3Press DOWN to view a combined graph of your Body Battery and stress levels.
Blue bars indicate periods of rest. Orange bars indicate periods of stress. Gray bars indicate times when you
were too active to determine your stress level.
Tips for Improved Body Battery Data
For more accurate results, wear the watch while sleeping.
Good sleep charges your Body Battery.
Strenuous activity and high stress can cause your Body Battery to drain more quickly.
Food intake, as well as stimulants like caffeine, has no impact on your Body Battery.
18 Appearance
Viewing the Heart Rate Glance
1From the watch face, press UP or DOWN to view the heart rate glance.
NOTE: You may need to add the glance to your glance loop (Customizing the Glance Loop, page17).
2Press START to view your current heart rate in beats per minute (bpm) and a graph of your heart rate for the
last 4 hours.
3Tap the graph to view the directional arrows, and swipe left or right to pan the graph.
4Press DOWN to view your average resting heart rate values for the last 7 days.
Viewing the Weather Glance
Weather requires a Bluetooth connection to a compatible phone.
1From the watch face, select UP or DOWN to view the weather glance.
2Select START to view weather details.
3Select UP or DOWN to view hourly, daily, and weather trend data.
Women's Health
Menstrual Cycle Tracking
Your menstrual cycle is an important part of your health. You can use your watch to log physical symptoms, sex
drive, sexual activity, ovulation days, and more. You can learn more and set up this feature in the Health Stats
settings of the Garmin Connect app.
Menstrual cycle tracking and details
Physical and emotional symptoms
Period and fertility predictions
Health and nutrition information
NOTE: You can use the Garmin Connect app to add and remove glances.
Pregnancy Tracking
The pregnancy tracking feature displays weekly updates on your pregnancy and provides health and nutrition
information. You can use your watch to log physical and emotional symptoms, blood glucose readings, and
baby movement. You can learn more and set up this feature in the Health Stats settings of the Garmin Connect
app.
Appearance 19
Using the Stress Level Glance
The stress level glance displays your current stress level and a graph of your stress level for the last several
hours. It can also guide you through a breathing activity to help you relax (Customizing the Glance Loop,
page17).
1While you are sitting or inactive, press UP or DOWN to view the stress level glance.
2Press START.
3Select an option:
Press DOWN to view additional details.
TIP: Blue bars indicate periods of rest. Orange bars indicate periods of stress. Gray bars indicate times
when you were too active to determine your stress level.
Press START to start a Breathwork activity.
Performance Measurements
These performance measurements are estimates that can help you track and understand your training activities
and race performances. The measurements require a few activities using wrist-based heart rate or a compatible
chest heart rate monitor. Cycling performance measurements require a heart rate monitor and a power meter.
These estimates are provided and supported by Firstbeat Analytics. For more information, go to www.garmin
.com/performance-data/running/.
NOTE: The estimates may seem inaccurate at first. The watch requires you to complete a few activities to learn
about your performance.
VO2 max.: VO2 max. is the maximum volume of oxygen (in milliliters) you can consume per minute per kilogram
of body weight at your maximum performance (About VO2 Max. Estimates, page21).
Predicted race times: The watch uses the VO2 max. estimate and your training history to provide a target race
time based on your current state of fitness (Viewing Your Predicted Race Times, page22).
HRV status: The watch analyzes your wrist heart rate readings while you are sleeping to determine your heart
rate variability (HRV) status based on your personal, long-term HRV averages (Heart Rate Variability Status,
page23).
Performance condition: Your performance condition is a real-time assessment after 6 to 20 minutes of activity.
It can be added as a data field so you can view your performance condition during the rest of your activity. It
compares your real-time condition to your average fitness level (Performance Condition, page24).
Lactate threshold: Lactate threshold requires a chest heart rate monitor. Lactate threshold is the point where
your muscles start to rapidly fatigue. Your watch measures your lactate threshold level using heart rate data
and pace (Lactate Threshold, page24).
Power curve (cycling): The power curve displays your sustained power output over time. You can view your
power curve for the previous month, three months, or twelve months (Viewing Your Power Curve, page25).
20 Appearance
About VO2 Max. Estimates
VO2 max. is the maximum volume of oxygen (in milliliters) you can consume per minute per kilogram of body
weight at your maximum performance. In simple terms, VO2 max. is an indication of athletic performance and
should increase as your level of fitness improves. The Forerunner device requires wrist-based heart rate or a
compatible chest heart rate monitor to display your VO2 max. estimate. The device has separate VO2 max.
estimates for running and cycling. You must run either outside with GPS or ride with a compatible power meter
at a moderate level of intensity for several minutes to get an accurate VO2 max. estimate.
On the device, your VO2 max. estimate appears as a number, description, and position on the color gauge. On
your Garmin Connect account, you can view additional details about your VO2 max. estimate, such as where it
ranks for your age and sex.
Purple Superior
Blue Excellent
Green Good
Orange Fair
Red Poor
VO2 max. data is provided by Firstbeat Analytics. VO2 max. analysis is provided with permission from The
Cooper Institute®. For more information, see the appendix (VO2 Max. Standard Ratings, page112), and go to
www.CooperInstitute.org.
Appearance 21
Getting Your VO2 Max. Estimate for Running
This feature requires wrist-based heart rate or a compatible chest heart rate monitor. If you are using a chest
heart rate monitor, you must put it on and pair it with your watch (Pairing Your Wireless Sensors, page61).
For the most accurate estimate, complete the user profile setup (Setting Up Your User Profile, page68), and set
your maximum heart rate (Setting Your Heart Rate Zones, page69). The estimate may seem inaccurate at first.
The watch requires a few runs to learn about your running performance. You can disable VO2 max. recording for
ultra run and trail run activities if you do not want those run types to affect your VO2 max. estimate (Turning Off
VO2 Max. Recording, page22).
1Start a running activity.
2Run for at least 10 minutes outdoors.
3After your run, select Save.
4Press UP or DOWN to scroll through the performance measurements.
Getting Your VO2 Max. Estimate for Cycling
This feature requires a power meter and wrist-based heart rate or a compatible chest heart rate monitor. The
power meter must be paired with your watch (Pairing Your Wireless Sensors, page61). If you are using a chest
heart rate monitor, you must put it on and pair it with your watch.
For the most accurate estimate, complete the user profile setup (Setting Up Your User Profile, page68) and set
your maximum heart rate (Setting Your Heart Rate Zones, page69). The estimate may seem inaccurate at first.
The watch requires a few rides to learn about your cycling performance.
1Start a cycling activity.
2Ride at a steady, high intensity for at least 20 minutes.
3After your ride, select Save.
4Press UP or DOWN to scroll through the performance measurements.
Turning Off VO2 Max. Recording
You can disable VO2 max. recording for ultra run and trail run activities if you do not want these run types to
affect your VO2 max. estimate (About VO2 Max. Estimates, page21).
1Hold UP.
2Select Activities & Apps.
3Select Trail Run or Ultra Run.
4Select the activity settings.
5Select Record VO2 Max. > Off.
Viewing Your Predicted Race Times
For the most accurate estimate, complete the user profile setup (Setting Up Your User Profile, page68), and set
your maximum heart rate (Setting Your Heart Rate Zones, page69).
Your watch uses the VO2 max. estimate (About VO2 Max. Estimates, page21) and your training history to
provide a target race time. The watch analyzes several weeks of your training data to refine the race time
estimates.
TIP: If you have more than one Garmin device, you can specify your primary training device in the Garmin
Connect app, which allows your watch to sync activities, history, and data from other devices (Syncing Activities
and Performance Measurements, page25).
1From the watch face, press UP or DOWN to view the performance glance.
2Press START to view glance details.
22 Appearance
3Press UP or DOWN to view a predicted race time.
4Press START to view predictions for other distances.
NOTE: The predictions may seem inaccurate at first. The watch requires a few runs to learn about your
running performance.
Heart Rate Variability Status
Your watch analyzes your wrist heart rate readings while you are sleeping to determine your heart rate variability
(HRV). Training, physical activity, sleep, nutrition, and healthy habits all impact your heart rate variability. HRV
values can vary widely based on gender, age, and fitness level. A balanced HRV status may indicate positive
signs of health such as good training and recovery balance, greater cardiovascular fitness, and resilience to
stress. An unbalanced or poor status may be a sign of fatigue, greater recovery needs, or increased stress. For
best results, you should wear the watch while sleeping. The watch requires three weeks of consistent sleep data
to display your heart rate variability status.
Appearance 23
Color Zone Status Description
Green Balanced Your seven-day average HRV is within your baseline range.
Orange Unbalanced Your seven-day average HRV is above or below your baseline range.
Red Low Your seven-day average HRV is well below your baseline range.
No color Poor
No status
Your HRV values are averaging well below the normal range for your age.
No status means that there is insufficient data to generate a seven-day average.
You can sync your watch with your Garmin Connect account to view your current heart rate variability status,
trends, and educational feedback.
Performance Condition
As you complete your activity, such as running or cycling, the performance condition feature analyzes your pace,
heart rate, and heart rate variability to make a real-time assessment of your ability to perform compared to
your average fitness level. It is approximately your real-time percentage deviation from your baseline VO2 max.
estimate.
Performance condition values range from -20 to +20. After the first 6 to 20 minutes of your activity, the device
displays your performance condition score. For example, a score of +5 means that you are rested, fresh, and
capable of a good run or ride. You can add performance condition as a data field to one of your training screens
to monitor your ability throughout the activity. Performance condition can also be an indicator of fatigue level,
especially at the end of a long training run or ride.
NOTE: The device requires a few runs or rides with a heart rate monitor to get an accurate VO2 max. estimate
and learn about your running or riding ability (About VO2 Max. Estimates, page21).
Viewing Your Performance Condition
This feature requires wrist-based heart rate or a compatible chest heart rate monitor.
1Add Performance Condition to a data screen (Customizing the Data Screens, page85).
2Go for a run or ride.
After 6 to 20 minutes, your performance condition appears.
3Scroll to the data screen to view your performance condition throughout the run or ride.
Lactate Threshold
Lactate threshold is the exercise intensity at which lactate (lactic acid) starts to accumulate in the bloodstream.
In running, this intensity level is estimated in terms of pace, heart rate, or power. When a runner exceeds the
threshold, fatigue starts to increase at an accelerating rate. For experienced runners, the threshold occurs at
approximately 90% of their maximum heart rate and between 10 km and half-marathon race pace. For average
runners, the lactate threshold often occurs well below 90% of maximum heart rate. Knowing your lactate
threshold can help you determine how hard to train or when to push yourself during a race.
If you already know your lactate threshold heart rate value, you can enter it in your user profile settings (Setting
Your Heart Rate Zones, page69). You can turn on the Auto Detection feature to automatically record your
lactate threshold during an activity.
24 Appearance
Performing a Guided Test to Determine Your Lactate Threshold
This feature requires a Garmin chest heart rate monitor. Before you can perform the guided test, you must put
on a heart rate monitor and pair it with your device (Pairing Your Wireless Sensors, page61).
The device uses your user profile information from the initial setup and your VO2 max. estimate to estimate
your lactate threshold. The device will automatically detect your lactate threshold during runs at a steady, high
intensity with heart rate.
TIP: The device requires a few runs with a chest heart rate monitor to get an accurate maximum heart rate value
and VO2 max. estimate. If you are having trouble getting a lactate threshold estimate, try manually lowering your
maximum heart rate value.
1From the watch face, select START.
2Select an outdoor running activity.
GPS is required to complete the test.
3Hold UP.
4Select Training > Lactate Threshold Guided Test.
5Start the timer, and follow the on-screen instructions.
After you begin your run, the device displays each step duration, the target, and current heart rate data. A
message appears when the test is complete.
6After you complete the guided test, stop the timer and save the activity.
If this is your first lactate threshold estimate, the device prompts you to update your heart rate zones based
on your lactate threshold heart rate. For each additional lactate threshold estimate, the device prompts you
to accept or decline the estimate.
Viewing Your Power Curve
Before you can view your power curve, you must record a ride that's at least one hour long using a power meter
in the last 90 days (Pairing Your Wireless Sensors, page61).
You can create workouts in your Garmin Connect account. The power curve displays your sustained power
output over time. You can view your power curve for the previous month, three months, or twelve months.
From the Garmin Connect app menu, select Performance Stats > Power Curve.
Syncing Activities and Performance Measurements
You can sync activities and performance measurements from other Garmin devices to your Forerunner watch
using your Garmin Connect account. This allows your watch to more accurately reflect your training status and
fitness. For example, you can record a ride with an Edge® bike computer, and view your activity details and
overall training load on your Forerunner watch.
Sync your Forerunner watch and other Garmin devices to your Garmin Connect account.
TIP: You can set a primary training device and primary wearable in the Garmin Connect app (Unified Training
Status, page37).
Recent activities and performance measurements from your other Garmin devices appear on your Forerunner
watch.
Turning Off Performance Notifications
Some performance notifications appear upon completion of your activity. Some performance notifications
appear during an activity or when you achieve a new performance measurement, such as a new VO2 max.
estimate. You can turn off the performance condition feature to avoid some of these notifications.
1Hold UP.
2Select System > Performance Condition.
Appearance 25
Training Status
These measurements are estimates that can help you track and understand your training activities. The
measurements require a few activities using wrist-based heart rate or a compatible chest heart rate monitor.
Cycling performance measurements require a heart rate monitor and a power meter.
These estimates are provided and supported by Firstbeat Analytics. For more information, go to www.garmin
.com/performance-data/running/.
NOTE: The estimates may seem inaccurate at first. The watch requires you to complete a few activities to learn
about your performance.
Training status: Training status shows you how your training affects your fitness and performance. Your
training status is based on changes to your VO2 max., acute load, and HRV status over an extended time
period.
VO2 max.: VO2 max. is the maximum volume of oxygen (in milliliters) you can consume per minute per kilogram
of body weight at your maximum performance (About VO2 Max. Estimates, page21). Your watch displays
heat and altitude corrected VO2 max. values when you are acclimating to high heat environments or high
altitude.
Acute load: Acute load is a weighted sum of your recent exercise load scores including exercise duration and
intensity. (Acute Load, page27).
Training load focus: Your watch analyzes and distributes your training load into different categories based on
the intensity and structure of each activity recorded. Training load focus includes the total load accumulated
per category, and the focus of the training. Your watch displays your load distribution over the last 4 weeks
(Training Load Focus, page28).
Recovery time: The recovery time displays how much time remains before you are fully recovered and ready for
the next hard workout (Recovery Time, page29).
26 Appearance
Training Status Levels
Training status shows you how your training affects your fitness level and performance. Your training status is
based on changes to your VO2 max., acute load, and HRV status over an extended time period. You can use
your training status to help plan future training and continue improving your fitness level.
No Status: The watch needs you to record multiple activities over two weeks, with VO2 max. results from
running or cycling, to determine your training status.
Detraining: You have a break in your training routine or you are training much less than usual for a week
or more. Detraining means that you are unable to maintain your fitness level. You can try increasing your
training load to see improvement.
Recovery: Your lighter training load is allowing your body to recover, which is essential during extended periods
of hard training. You can return to a higher training load when you feel ready.
Maintaining: Your current training load is enough to maintain your fitness level. To see improvement, try adding
more variety to your workouts or increasing your training volume.
Productive: Your current training load is moving your fitness level and performance in the right direction. You
should plan recovery periods into your training to maintain your fitness level.
Peaking: You are in ideal race condition. Your recently reduced training load is allowing your body to recover
and fully compensate for earlier training. You should plan ahead, since this peak state can only be maintained
for a short time.
Overreaching: Your training load is very high and counterproductive. Your body needs a rest. You should give
yourself time to recover by adding lighter training to your schedule.
Unproductive: Your training load is at a good level, but your fitness is decreasing. Try focusing on rest, nutrition,
and stress management.
Strained: There is imbalance between your recovery and training load. It is a normal result after a hard training
or major event. Your body may be struggling to recover, so you should pay attention to your overall health.
Tips for Getting Your Training Status
The training status feature depends on updated assessments of your fitness level, including at least one VO2
max. measurement per week. Your VO2 max. estimate is updated after outdoor runs or rides with power during
which your heart rate reached at least 70% of your maximum heart rate for several minutes. Indoor run activities
do not generate a VO2 max. estimate in order to preserve the accuracy of your fitness level trend. You can
disable VO2 max. recording for ultra run and trail run activities if you do not want those run types to affect your
VO2 max. estimate (Turning Off VO2 Max. Recording, page22).
To get the most out of the training status feature, you can try these tips.
At least one time per week, run or ride outdoors with a power meter, and reach a heart rate higher than 70% of
your maximum heart rate for at least 10 minutes.
After using the watch for one week, your training status should be available.
Record all of your fitness activities on your primary training device, allowing your watch to learn about your
performance (Syncing Activities and Performance Measurements, page25).
Wear the watch consistently while you sleep, to continue generating an up-to-date HRV status. Having a valid
HRV status can help maintain a valid training status when you do not have as many activities with VO2 max.
measurements.
Acute Load
Acute load is a weighted sum of your excess post-exercise oxygen consumption (EPOC) for the last several
days. The gauge indicates whether your current load is low, optimal, high, or very high. The optimal range is
based on your individual fitness level and training history. The range adjusts as your training time and intensity
increase or decrease.
Appearance 27
Training Load Focus
In order to maximize performance and fitness gains, training should be distributed across three categories: low
aerobic, high aerobic, and anaerobic. Training load focus shows you how much of your training is currently in
each category and provides training targets. Training load focus requires at least 7 days of training to determine
if your training load is low, optimal, or high. After 4 weeks of training history, your training load estimate will
have more detailed target information to help you balance your training activities.
Below targets: Your training load is lower than optimal in all intensity categories. Try increasing the duration or
frequency of your workouts.
Low aerobic shortage: Try adding more low aerobic activities to provide recovery and balance for your higher
intensity activities.
High aerobic shortage: Try adding more high aerobic activities to help improve your lactate threshold and VO2
max. over time.
Anaerobic shortage: Try adding a few more intense, anaerobic activities to improve your speed and anaerobic
capacity over time.
Balanced: Your training load is balanced and provides all-around fitness benefits as you continue training.
Low aerobic focus: Your training load is mostly low aerobic activity. This provides a solid foundation and
prepares you for adding more intense workouts.
High aerobic focus: Your training load is mostly high aerobic activity. These activities help to improve lactate
threshold, VO2 max., and endurance.
Anaerobic focus: Your training load is mostly intense activity. This leads to rapid fitness gains, but should be
balanced with low aerobic activities.
Above targets: Your training load is higher than optimal, and you should consider scaling back the duration and
frequency of your workouts.
About Training Effect
Training Effect measures the impact of an activity on your aerobic and anaerobic fitness. Training Effect
accumulates during the activity. As the activity progresses, the Training Effect value increases. Training Effect
is determined by your user profile information and training history, and heart rate, duration, and intensity of your
activity. There are seven different Training Effect labels to describe the primary benefit of your activity. Each
label is color coded and corresponds to your training load focus (Training Load Focus, page28). Each feedback
phrase, for example, "Highly Impacting VO2 Max." has a corresponding description in your Garmin Connect
activity details.
Aerobic Training Effect uses your heart rate to measure how the accumulated intensity of an exercise affects
your aerobic fitness and indicates if the workout had a maintaining or improving effect on your fitness level.
Your excess post-exercise oxygen consumption (EPOC) accumulated during exercise is mapped to a range of
values that account for your fitness level and training habits. Steady workouts at moderate effort or workouts
involving longer intervals (>180 sec) have a positive impact on your aerobic metabolism and result in an
improved aerobic Training Effect.
Anaerobic Training Effect uses heart rate and speed (or power) to determine how a workout affects your ability
to perform at very high intensity. You receive a value based on the anaerobic contribution to EPOC and the
type of activity. Repeated high-intensity intervals of 10 to 120 seconds have a highly beneficial impact on your
anaerobic capability and result in an improved anaerobic Training Effect.
You can add Aerobic Training Effect and Anaerobic Training Effect as data fields to one of your training screens
to monitor your numbers throughout the activity.
28 Appearance
Training Effect Aerobic Benefit Anaerobic Benefit
From 0.0 to 0.9 No benefit. No benefit.
From 1.0 to 1.9 Minor benefit. Minor benefit.
From 2.0 to 2.9 Maintains your aerobic fitness. Maintains your anaerobic fitness.
From 3.0 to 3.9 Impacts your aerobic fitness. Impacts your anaerobic fitness.
From 4.0 to 4.9 Highly impacts your aerobic fitness. Highly impacts your anaerobic fitness.
5.0 Overreaching and potentially harmful without
enough recovery time.
Overreaching and potentially harmful without
enough recovery time.
Training Effect technology is provided and supported by Firstbeat Analytics. For more information, go to www
.firstbeat.com.
Recovery Time
You can use your Garmin device with wrist-based heart rate or a compatible chest heart rate monitor to display
how much time remains before you are fully recovered and ready for the next hard workout.
NOTE: The recovery time recommendation uses your VO2 max. estimate and may seem inaccurate at first. The
device requires you to complete a few activities to learn about your performance.
The recovery time appears immediately following an activity. The time counts down until it is optimal for you to
attempt another hard workout. The device updates your recovery time throughout the day based on changes in
sleep, stress, relaxation, and physical activity.
Viewing Your Recovery Time
For the most accurate estimate, complete the user profile setup (Setting Up Your User Profile, page68), and set
your maximum heart rate (Setting Your Heart Rate Zones, page69).
1Start a running activity.
2After your run, select Save.
The recovery time appears. The maximum time is 4 days.
NOTE: From the watch face, you can press UP or DOWN to view the training status glance, and press START
to scroll through the metrics to view your recovery time.
Recovery Heart Rate
If you are training with wrist-based heart rate or a compatible chest heart rate monitor, you can check your
recovery heart rate value after each activity. Recovery heart rate is the difference between your exercising heart
rate and your heart rate two minutes after the exercise has stopped. For example, after a typical training run,
you stop the timer. Your heart rate is 140bpm. After two minutes of no activity or cool down, your heart rate
is 90 bpm. Your recovery heart rate is 50 bpm (140 minus 90). Some studies have linked recovery heart rate to
cardiac health. Higher numbers generally indicate healthier hearts.
TIP: For best results, you should stop moving for two minutes while the device calculates your recovery heart
rate value.
Appearance 29
Pausing and Resuming Your Training Status
If you are injured or sick, you can pause your training status. You can continue to record fitness activities,
but your training status, training load focus, recovery feedback, and workout recommendations are temporarily
disabled.
You can resume your training status when you are ready to start training again. For best results, you need at
least one VO2 max. measurement each week (About VO2 Max. Estimates, page21).
1When you want to pause your training status, select an option:
From the training status glance, hold UP, and select Options > Pause Training Status.
From your Garmin Connect settings, select Performance Stats > Training Status > > Pause Training
Status.
2Sync your watch with your Garmin Connect account.
3When you want to resume your training status, select an option:
From the training status glance, hold UP, and select Options > Resume Training Status.
From your Garmin Connect settings, select Performance Stats > Training Status > > Resume Training
Status.
4Sync your watch with your Garmin Connect account.
30 Appearance
Training Readiness
Your training readiness is a score and a short message that helps you determine how ready you are for training
each day. The score is continuously calculated and updated throughout the day using these factors:
Sleep score (last night)
Recovery time
HRV status
Acute load
Sleep history (last 3 nights)
Stress history (last 3 days)
Color Zone Score Description
Purple 95 to 100 Prime
Best possible
Blue 75 to 94 High
Ready for challenges
Green 50 to 74 Moderate
Good to go
Orange 25 to 49 Low
Time to slow down
Red 1 to 24 Poor
Let your body recover
To see your training readiness trends over time, go to your Garmin Connect account.
Appearance 31
Controls
The controls menu lets you quickly access watch features and options. You can add, reorder, and remove the
options in the controls menu (Customizing the Controls Menu, page35).
From any screen, hold LIGHT.
32 Appearance
Icon Name Description
Airplane Mode Select to enable or disable airplane mode to turn off all wireless communica
tions.
Alarm Clock Select to add or edit an alarm (Setting an Alarm, page81).
Altimeter Select to open the altimeter screen.
Assistance Select to send an assistance request (Requesting Assistance, page80).
Barometer Select to open the barometer screen.
Battery Saver Select to enable or disable the battery saver feature (Power Manager Settings,
page90).
Brightness Select to adjust the screen brightness (Changing the Screen Settings, page92).
Broadcast Heart
Rate
Select to turn on heart rate broadcasting to a paired device (Broadcasting Heart
Rate Data, page54).
Clocks Select to open the Clocks app to set an alarm, timer, stopwatch, or view alternate
time zones.
Compass Select to open the compass screen.
Do Not Disturb
Select to enable or disable do not disturb mode to dim the screen and disable
alerts and notifications. For example, you can use this mode while watching a
movie.
Find My Phone
Select to play an audible alert on your paired phone, if it is within Bluetooth
range. The Bluetooth signal strength appears on the Forerunner watch screen,
and it increases as you move closer to your phone.
Flashlight Select to turn on the screen to use your watch as a flashlight.
Select to turn on the LED flashlight.
Lock Device Select to lock the buttons and the touchscreen to prevent inadvertent presses
and swipes.
Music Controls Select to control music playback on your watch or phone.
Phone Select to enable or disable Bluetooth technology and your connection to your
paired phone.
Power Off Select to turn off the watch.
Save Location Select to save your current location to navigate back to it later.
Set Time With GPS Select to sync your watch with the time on your phone or using satellites.
Sleep Mode Select to enable or disable Sleep Mode (Customizing Sleep Mode, page39).
Appearance 33
Icon Name Description
Stopwatch Select to start the stopwatch (Using the Stopwatch, page82).
Sunrise & Sunset Select to view sunrise, sunset, and twilight times.
Sync Select to sync your watch with your paired phone.
Timer Select to set a countdown timer (Starting the Countdown Timer, page82).
Touch Select to enable or disable touchscreen controls.
Wallet Select to open your GarminPay wallet and pay for purchases with your watch
(GarminPay, page35).
Wi-Fi Select to enable or disable Wi‑Fi communications.
Viewing the Controls Menu
The controls menu contains options, such as the stopwatch, locating your connected phone, and turning the
watch off. You can also open the GarminPay wallet.
NOTE: You can add, reorder, and remove the options in the controls menu (Customizing the Controls Menu,
page35).
1From any screen, hold LIGHT.
2Press UP or DOWN to scroll through the options.
TIP: You can also drag the touchscreen to rotate the options.
34 Appearance
Customizing the Controls Menu
You can add, remove, and change the order of the shortcut menu options in the controls menu (Viewing the
Controls Menu, page34).
1Hold UP.
2Select Appearance > Controls.
3Select a shortcut to customize.
4Select an option:
Select Reorder to change the location of the shortcut in the controls menu.
Select Remove to remove the shortcut from the controls menu.
5If necessary, select Add New to add an additional shortcut to the controls menu.
GarminPay
The GarminPay feature allows you to use your watch to pay for purchases in participating locations using credit
or debit cards from a participating financial institution.
Setting Up Your GarminPay Wallet
You can add one or more participating credit or debit cards to your GarminPay wallet. Go to garmin.com
/garminpay/banks to find participating financial institutions.
1From the Garmin Connect app, select or .
2Select Garmin Pay > Get Started.
3Follow the on-screen instructions.
Paying for a Purchase Using Your Watch
Before you can use your watch to pay for purchases, you must set up at least one payment card.
You can use your watch to pay for purchases in a participating location.
1Hold LIGHT.
2Select .
3Enter your four-digit passcode.
NOTE: If you enter your passcode incorrectly three times, your wallet locks, and you must reset your
passcode in the Garmin Connect app.
Your most recently used payment card appears.
4If you have added multiple cards to your GarminPay wallet, swipe to change to another card (optional).
5If you have added multiple cards to your GarminPay wallet, select DOWN to change to another card
(optional).
Appearance 35
6Within 60 seconds, hold your watch near the payment reader, with the watch facing the reader.
The watch vibrates and displays a check mark when it is finished communicating with the reader.
7If necessary, follow the instructions on the card reader to complete the transaction.
TIP: After you successfully enter your passcode, you can make payments without a passcode for 24 hours while
you continue to wear your watch. If you remove the watch from your wrist or disable heart rate monitoring, you
must enter the passcode again before making a payment.
Adding a Card to Your GarminPay Wallet
You can add up to 10 credit or debit cards to your GarminPay wallet.
1From the Garmin Connect app, select or .
2Select Garmin Pay > > Add Card.
3Follow the on-screen instructions.
After the card is added, you can select the card on your watch when you make a payment.
Managing Your GarminPay Cards
You can temporarily suspend or delete a card.
NOTE: In some countries, participating financial institutions may restrict the GarminPay features.
1From the Garmin Connect app, select or .
2Select Garmin Pay.
3Select a card.
4Select an option:
To temporarily suspend or unsuspend the card, select Suspend Card.
The card must be active to make purchases using your Forerunner watch.
To delete the card, select .
Changing Your GarminPay Passcode
You must know your current passcode to change it. If you forget your passcode, you must reset the GarminPay
feature for your Forerunner watch, create a new passcode, and reenter your card information.
1From the Forerunner device page in the Garmin Connect app, select Garmin Pay > Change Passcode.
2Follow the on-screen instructions.
The next time you pay using your Forerunner watch, you must enter the new passcode.
Morning Report
Your watch displays a morning report based on your normal wake time. Press DOWN, and select to view
the report, which includes weather, sleep, overnight heart rate variability status, and more (Customizing Your
Morning Report, page36).
Customizing Your Morning Report
NOTE: You can customize these settings on you watch or in your Garmin Connect account.
1Hold UP.
2Select Appearance > Morning Report.
3Select an option:
Select Show Report to enable or disable the morning report.
Select Edit Report to customize the order and type of data that appears in your morning report.
Select Your Name to customize your display name.
36 Appearance
Training
Training for a Race Event
Your watch can suggest daily workouts to help you train for a running or cycling event, if you have a VO2 max.
estimate (About VO2 Max. Estimates, page21).
1On your phone or computer, go to your Garmin Connect calendar.
2Select the day of the event, and add the race event.
You can search for an event in your area or create your own event.
3Add details about the event, and add the course if it's available.
4Sync your watch with your Garmin Connect account.
5On your watch, scroll to the primary event glance to see a countdown to your primary race event.
6From the watch face, press START, and select a running or cycling activity.
NOTE: If you have completed at least 1 outdoor run with heart rate data or 1 ride with heart rate and power
data, daily suggested workouts appear on your watch.
Race Calendar and Primary Race
When you add a race event to your Garmin Connect calendar, you can view the event on your watch by adding
the primary race glance (Glances, page14). The event date must be in the next 365 days. The watch displays a
countdown to the event, your goal time or predicted finish time (running events only), and weather information.
NOTE: Historical weather information for the location and date is available right away. Local forecast data
appears approximately 14 days before the event.
If you add more than one race event, you are prompted to choose a primary event.
Depending on the available course data for your event, you can view elevation data, the course map, and add a
PacePro plan (PacePro Training, page44).
Unified Training Status
When you use more than one Garmin device with your Garmin Connect account, you can choose which device is
the primary data source for everyday use and for training purposes.
From the Garmin Connect app menu, select Settings.
Primary Training Device: Sets the priority data source for training metrics like your training status and load
focus.
Primary Wearable: Sets the priority data source for daily health metrics like steps and sleep. This should be the
watch you wear most often.
TIP: For the most accurate results, Garmin recommends that you sync often with your Garmin Connect account.
Training 37
Health and Wellness Settings
Hold UP, and select Health & Wellness.
Wrist Heart Rate: Allows you to customize the wrist heart rate monitor settings (Wrist Heart Rate Monitor
Settings, page52).
Pulse Oximeter: Allows you to select a pulse oximeter mode (Turning On All-Day Mode, page55).
Move Alert: Enables or disables the Move Alert feature (Using the Move Alert, page38).
Goal Alerts: Allows you to turn on and off goal alerts, or turn them off only during activities. Goal alerts appear
for your daily steps goal, daily floors climbed goal, and weekly intensity minutes goal.
Move IQ: Allows you to turn on and off Garmin Move IQ events. When your movements match familiar exercise
patterns, the Garmin Move IQ feature automatically detects the event and displays it in your timeline. The
Garmin Move IQ events show activity type and duration, but they do not appear in your activities list or
newsfeed. For more detail and accuracy, you can record a timed activity on your device.
Auto Goal
Your watch creates daily step and floors climbed goals automatically, based on your previous activity levels. As
you move during the day, the watch shows your progress toward your daily goal .
If you choose not to use the auto goal feature, you can set personalized step and floors climbed goals on your
Garmin Connect account.
Using the Move Alert
Sitting for prolonged periods of time can trigger undesirable metabolic state changes. The move alert reminds
you to keep moving. After one hour of inactivity, Move! appears. The device also beeps or vibrates if audible
tones are turned on (System Settings, page91).
Go for a short walk (at least a couple of minutes) to reset the move alert.
Turning on the Move Alert
1Hold UP.
2Select Notifications & Alerts > System Alerts > Health & Wellness > Move Alert > On.
Sleep Tracking
While you are sleeping, the watch automatically detects your sleep and monitors your movement during your
normal sleep hours. You can set your normal sleep hours in the user settings on your Garmin Connect account.
Sleep statistics include total hours of sleep, sleep stages, sleep movement, and sleep score. You can view your
sleep statistics on your Garmin Connect account.
NOTE: Naps are not added to your sleep statistics. You can use do not disturb mode to turn off notifications
and alerts, with the exception of alarms (Using Do Not Disturb Mode, page39).
38 Training
Using Automated Sleep Tracking
1Wear your watch while sleeping.
2Upload your sleep tracking data to the Garmin Connect site (Manually Syncing Data with Garmin Connect,
page78).
You can view your sleep statistics on your Garmin Connect account.
You can view sleep information from the previous night on your Forerunner watch (Glances, page14).
Customizing Sleep Mode
1Hold UP.
2Select System > Sleep Mode.
3Select an option:
Select Schedule, select a day, and enter your normal sleep hours.
Select Watch Face to use the sleep watch face.
Select Display to configure the screen brightness and timeout.
Select Do Not Disturb to enable or disable do not disturb mode.
Using Do Not Disturb Mode
You can use do not disturb mode to turn off the display, tone alerts, and vibration alerts. For example, you can
use this mode while sleeping or watching a movie.
NOTE: You can set your normal sleep hours in the user settings on your Garmin Connect account. You can
enable the During Sleep option in the system settings to automatically enter do not disturb mode during your
normal sleep hours (System Settings, page91).
NOTE: You can add options to the controls menu (Customizing the Controls Menu, page35).
1Hold LIGHT.
2Select Do Not Disturb.
Intensity Minutes
To improve your health, organizations such as the World Health Organization recommend at least 150 minutes
per week of moderate intensity activity, such as brisk walking, or 75 minutes per week of vigorous intensity
activity, such as running.
The watch monitors your activity intensity and tracks your time spent participating in moderate to vigorous
intensity activities (heart rate data is required to quantify vigorous intensity). The watch adds the amount of
moderate activity minutes with the amount of vigorous activity minutes. Your total vigorous intensity minutes
are doubled when added.
Earning Intensity Minutes
Your Forerunner watch calculates intensity minutes by comparing your heart rate data to your average resting
heart rate. If heart rate is turned off, the watch calculates moderate intensity minutes by analyzing your steps
per minute.
Start a timed activity for the most accurate calculation of intensity minutes.
Wear your watch all day and night for the most accurate resting heart rate.
Garmin Move IQ
When your movements match familiar exercise patterns, the Move IQ feature automatically detects the event
and displays it in your timeline. The Move IQ events show activity type and duration, but they do not appear in
your activities list or newsfeed. For more detail and accuracy, you can record a timed activity on your device.
Training 39
Workouts
You can create custom workouts that include goals for each workout step and for varied distances, times, and
calories. During your activity, you can view workout-specific data screens that contain workout step information,
such as the workout step distance or average step pace.
You can create and find more workouts using Garmin Connect, or select a training plan that has built-in
workouts and transfer them to your watch.
You can schedule workouts using Garmin Connect. You can plan workouts in advance and store them on your
watch.
Following a Workout From Garmin Connect
Before you can download a workout from Garmin Connect, you must have a Garmin Connect account (Garmin
Connect, page77).
1Select an option:
Open the Garmin Connect app.
Go to connect.garmin.com.
2Select Training & Planning > Workouts.
3Find a workout, or create and save a new workout.
4Select or Send to Device.
5Follow the on-screen instructions.
Creating a Custom Workout on Garmin Connect
Before you can create a workout on the Garmin Connect app, you must have a Garmin Connect account (Garmin
Connect, page77).
1From the Garmin Connect app, select or .
2Select Training & Planning > Workouts > Create a Workout.
3Select an activity.
4Create your custom workout.
5Select Save.
6Enter a name for your workout, and select Save.
The new workout appears in your list of workouts.
NOTE: You can send this workout to your watch (Sending a Custom Workout to Your Watch, page40).
Sending a Custom Workout to Your Watch
You can send a custom workout you created with the Garmin Connect app to your watch (Creating a Custom
Workout on Garmin Connect, page40).
1From the Garmin Connect app, select or .
2Select Training & Planning > Workouts.
3Select a workout from the list.
4Select .
5Select your compatible watch.
6Follow the on-screen instructions.
40 Training
Starting a Workout
Your device can guide you through multiple steps in a workout.
1Press START.
2Select an activity.
3Select UP > Training > Workouts.
4Select a workout.
NOTE: Only workouts that are compatible with the selected activity appear in the list.
TIP: While viewing workout steps, you can press START to view an animation of the selected exercise, if
available.
5Select START > Do Workout.
6Press START to start the activity timer.
After you begin a workout, the device displays each step of the workout, step notes (optional), the target
(optional), and the current workout data. For strength, yoga, cardio, or Pilates activities, an instructional
animation appears.
Following a Daily Suggested Workout
Before the watch can suggest a daily workout, you must have a VO2 max. estimate (About VO2 Max. Estimates,
page21).
1Press START.
2Select Run or Bike.
The daily suggested workout appears.
3Press DOWN to view details about the workout, such as steps and estimated benefit (optional).
4Select START, and select an option:
To do the workout, select Do Workout.
To skip the workout, select Dismiss.
To view workout suggestions for the upcoming week, select More Suggestions.
To view the workout settings, such as Target Type, select Settings.
The suggested workout updates automatically to changes in training habits, recovery time, and VO2 max.
Turning Daily Suggested Workout Prompts On and Off
Daily suggested workouts are recommended based on your previous activities saved to your Garmin Connect
account.
1Press START.
2Select Run or Bike.
3Hold UP.
4Select Training > Workouts > Daily Suggestions > Settings > Workout Prompt.
5Press START to disable or enable prompts.
Training 41
Following a Pool Swim Workout
Your watch can guide you through multiple steps in a swim workout. Creating and sending a pool swim workout
is similar to Workouts, page40 and Following a Workout From Garmin Connect, page40.
1Press START.
2Select Pool Swim.
3Hold UP.
4Select Training.
5Select an option:
Select Workouts to do workouts downloaded from Garmin Connect.
Select Critical Swim Speed to record a Critical Swim Speed (CSS) test or enter a CSS value manually
(Recording a Critical Swim Speed Test, page42).
Select Training Calendar to do or view your scheduled workouts.
6Follow the on-screen instructions.
Recording a Critical Swim Speed Test
Your Critical Swim Speed (CSS) value is the result of a time-trial-based test expressed as a pace per 100 meters.
Your CSS is the theoretical speed you can maintain continuously without exhaustion. You can use your CSS to
guide your training pace and monitor your improvement.
1Press START.
2Select Pool Swim.
3Hold UP.
4Select Training > Critical Swim Speed > Do Critical Swim Speed Test.
5Press DOWN to preview the workout steps (optional).
6Press START.
7Press START to start the activity timer..
8Follow the on-screen instructions.
Editing Your Critical Swim Speed Result
You can manually edit or enter a new time for your CSS value.
1From the watch face, press START.
2Select Pool Swim.
3Hold UP.
4Select Training > Critical Swim Speed > Critical Swim Speed.
5Enter the minutes.
6Enter the seconds.
Workout Execution Score
After you complete a workout, the watch displays your workout execution score based on how accurately you
completed the workout. For example, if your 60 minute workout has a target pace range, and you stay in that
range for 50 minutes, your workout execution score is 83%.
Good, 67 to 100%
Average, 34 to 66%
Low, 0 to 33%
42 Training
About the Training Calendar
The training calendar on your watch is an extension of the training calendar or schedule you set up in your
Garmin Connect account. After you have added a few workouts to the Garmin Connect calendar, you can send
them to your device. All scheduled workouts sent to the device appear in the calendar glance. When you select
a day in the calendar, you can view or do the workout. The scheduled workout stays on your watch whether
you complete it or skip it. When you send scheduled workouts from Garmin Connect, they overwrite the existing
training calendar.
Using Garmin Connect Training Plans
Before you can download and use a training plan, you must have a Garmin Connect account (Garmin Connect,
page77), and you must pair the Forerunner watch with a compatible phone.
1From the Garmin Connect app, select or .
2Select Training & Planning > Training Plans.
3Select and schedule a training plan.
4Follow the on-screen instructions.
5Review the training plan in your calendar.
Adaptive Training Plans
Your Garmin Connect account has an adaptive training plan and Garmin coach to fit your training goals. For
example, you can answer a few questions and find a plan to help you complete a 5 km race. The plan adjusts
to your current level of fitness, coaching and schedule preferences, and race date. When you start a plan, the
Garmin coach glance is added to the glance loop on your Forerunner watch.
Starting Today's Workout
After you send a Garmin Coach training plan to your watch, the Garmin Coach glance appears in your glance
loop (Customizing the Glance Loop, page17).
1From the watch face, press UP or DOWN to view the Garmin Coach glance.
If a workout for this activity is scheduled for today, the watch shows the workout name and prompts you to
start it.
2Press START.
3Press DOWN to view the workout steps (optional).
4Press START, and select Do Workout.
5Follow the on-screen instructions.
Training 43
Interval Workouts
Interval workouts can be open or structured. Structured repeats can be based on distance or time. The device
saves your custom interval workout until you edit the workout again.
TIP: All interval workouts include an open-ended cool down step.
Customizing an Interval Workout
1Press START.
2Select an activity.
3Press UP.
4Select Training > Intervals > Structured Repeats.
A workout appears.
5Press START, and select Edit Workout.
6Select one or more options:
To set the interval duration and type, select Interval.
To set the rest duration and type, select Rest.
To set the number of repetitions, select Repeat.
To add an open-ended warm up to your workout, select Warm Up > On.
7Press BACK.
Starting an Interval Workout
1Press START.
2Select an activity.
3Hold UP.
4Select Training > Intervals.
5Select an option:
Select Open Repeats to mark your intervals and rest periods manually by pressing BACK.
Select Structured Repeats > START > Do Workout to use an interval workout based on distance or time.
6Press START to start the activity timer.
7When your interval workout has a warm up, press BACK to begin the first interval.
8Follow the on-screen instructions.
After you complete all of the intervals, a message appears.
Stopping an Interval Workout
At any time, press BACK to stop the current interval or rest period and transition to the next interval or rest
period.
After all intervals and rest periods are complete, press BACK to end the interval workout and transition to a
timer that can be used for cool down.
At any time, press STOP to stop the activity timer. You can resume the timer or end the interval workout.
PacePro Training
Many runners like to wear a pace band during a race to help achieve their race goal. The PacePro feature allows
you to create a custom pace band based on distance and pace or distance and time. You can also create a pace
band for a known course to optimize your pace effort based on elevation changes.
You can create a PacePro plan using the Garmin Connect app. You can preview the splits and elevation plot
before you run the course.
44 Training
Downloading a PacePro Plan from Garmin Connect
Before you can download a PacePro plan from Garmin Connect, you must have a Garmin Connect account
(Garmin Connect, page77).
1Select an option:
Open the Garmin Connect app, and select or .
Go to connect.garmin.com.
2Select Training & Planning > PacePro Pacing Strategies.
3Follow the on-screen instructions to create and save a PacePro plan.
4Select or Send to Device.
Training 45
Starting a PacePro Plan
Before you can start a PacePro plan, you must download a plan from your Garmin Connect account.
1Press START.
2Select an outdoor running activity.
3Hold UP.
4Select Training > PacePro Plans.
5Select a plan.
6Press START.
7Select an option:
Select Use Plan > to enable course navigation and start the plan.
Select Map to preview the course.
8Press START to start the activity timer.
Target split pace
Current split pace
Completion progress for the split
Distance remaining in the split
Overall time ahead of or behind your target time
TIP: You can hold UP, and select Stop PacePro > to stop the PacePro plan. The activity timer continues
running.
46 Training
Creating a PacePro Plan on Your Watch
Before you can create a PacePro plan on your watch, you must create a course and load it to your watch
(Creating a Course on Garmin Connect, page56).
1From the watch face, select START.
2Select an outdoor running activity.
3Hold UP.
4Select Navigation > Courses.
5Select a course.
6Select PacePro > Create New.
7Select an option:
Select Goal Pace, and enter your target pace.
Select Goal Time, and enter your target time.
The device displays your custom pace band.
TIP: You can press DOWN to preview the splits.
8Select START.
9Select an option:
Select Use Plan > to enable course navigation and start the plan.
Select Map to preview the course.
Using Virtual Partner®
Your Virtual Partner is a training tool designed to help you meet your goals. You can set a pace for the Virtual
Partner and race against it.
NOTE: This feature is not available for all activities.
1Hold UP.
2Select Activities & Apps.
3Select an activity.
4Select the activity settings.
5Select Data Screens > Add New > Virtual Partner.
6Enter a pace or speed value.
7Press UP or DOWN to change the location of the Virtual Partner screen (optional).
8Start your activity (Starting an Activity, page3).
9Press UP or DOWN to scroll to the Virtual Partner screen and see who is leading.
Training 47
Setting a Training Target
The training target feature works with the Virtual Partner feature so you can train toward a set distance,
distance and time, distance and pace, or distance and speed goal. During your training activity, the watch gives
you real-time feedback about how close you are to achieving your training target.
1Press START.
2Select an activity.
3Hold UP.
4Select Training > Set a Target.
5Select an option:
Select Distance Only to select a preset distance or enter a custom distance.
Select Distance and Time to select a distance and time target.
Select Distance and Pace or Distance and Speed to select a distance and pace or speed target.
The training target screen appears and displays your estimated finish time. The estimated finish time is
based on your current performance and the time remaining.
6Press START to start the activity timer.
TIP: You can hold UP, and select Cancel Target > to cancel the training target.
Cancelling a Training Target
1During an activity, hold UP.
2Select Cancel Target > .
Racing a Previous Activity
You can race a previously recorded or downloaded activity. This feature works with the Virtual Partner feature
so you can see how far ahead or behind you are during the activity.
NOTE: This feature is not available for all activities.
1Press START.
2Select an activity.
3Hold UP.
4Select Training > Race an Activity.
5Select an option:
Select From History to select a previously recorded activity from your device.
Select Downloaded to select an activity you downloaded from your Garmin Connect account.
6Select the activity.
The Virtual Partner screen appears indicating your estimated finish time.
7Press START to start the activity timer.
8After you complete your activity, press STOP, and select Save.
48 Training
Using the Metronome
The metronome feature plays tones at a steady rhythm to help you improve your performance by training at a
faster, slower, or more consistent cadence.
NOTE: This feature is not available for all activities.
1Press START.
2Select an activity.
3Hold UP.
4Select the activity settings.
5Select Metronome > Status > On.
6Select an option:
Select Beats / Minute to enter a value based on the cadence you want to maintain.
Select Alert Frequency to customize the frequency of the beats.
Select Sound and Vibe to customize the metronome tone and vibration.
7If necessary, select Preview to listen to the metronome feature before you run.
8Go for a run (Going for a Run, page5).
The metronome starts automatically.
9During your run, press UP or DOWN to view the metronome screen.
10 If necessary, hold UP to change the metronome settings.
Enabling Self Evaluation
When you save an activity, you can evaluate your perceived effort and how you felt during the activity. Your self
evaluation information can be viewed in your Garmin Connect account.
1Hold UP.
2Select Activities & Apps.
3Select an activity.
4Select the activity settings.
5Select Self Evaluation.
6Select an option:
To complete self evaluation only after workouts, select Workouts Only.
To complete self evaluation after every activity, select Always.
Extended Display Mode
You can use Extended Display mode to display data screens from your Forerunner watch on a compatible Edge
bike computer during a ride or triathlon. See your Edge owner's manual for more information.
History
History includes time, distance, calories, average pace or speed, lap data, and optional sensor information.
NOTE: When the device memory is full, your oldest data is overwritten.
History 49
Using History
History contains previous activities you have saved on your watch.
The watch has a history glance for quick access to your activity data (Glances, page14).
1From the watch face, hold UP.
2Select History.
3Select an option:
To view an activity from this week, select This Week.
To view an older activity, select Previous Weeks, and select a week.
To view your personal records by sport, select Records (Personal Records, page50).
To view your weekly or monthly totals, select Totals.
4Select an activity.
5Press START.
6Select an option:
To view additional information about the activity, select All Stats.
To view the impact of the activity on your aerobic and anaerobic fitness, select Training Effect (About
Training Effect, page28).
To view your time in each heart rate zone, select Heart Rate (Viewing Your Time in Each Heart Rate Zone,
page51).
To view a summary of your running power, select Running Power.
To select an interval and view addition information about each interval, select Intervals.
To select a lap and view additional information about each lap, select Laps.
To select a ski or snowboard run and view additional information about each run, select Runs.
To select an exercise set and view additional information about each set, select Sets.
To view the activity on a map, select Map.
To view an elevation plot for the activity, select Elevation Plot.
To delete the selected activity, select Delete.
Multisport History
Your device stores the overall multisport summary of the activity, including overall distance, time, calories, and
optional accessory data. Your device also separates the activity data for each sport segment and transition so
you can compare similar training activities and track how quickly you move through the transitions. Transition
history includes distance, time, average speed, and calories.
Personal Records
When you complete an activity, the watch displays any new personal records you achieved during that activity.
Personal records include your fastest time over several typical race distances, highest strength activity weight
for major movements, and longest run, ride, or swim.
NOTE: For cycling, personal records also include most ascent and best power (power meter required).
Viewing Your Personal Records
1From the watch face, hold UP.
2Select History > Records.
3Select a sport.
4Select a record.
5Select View Record.
50 History
Restoring a Personal Record
You can set each personal record back to the one previously recorded.
1From the watch face, hold UP.
2Select History > Records.
3Select a sport.
4Select a record to restore.
5Select Previous > .
NOTE: This does not delete any saved activities.
Clearing Personal Records
1From the watch face, hold UP.
2Select History > Records.
3Select a sport.
4Select an option:
To delete one record, select a record, and select Clear Record > .
To delete all records for the sport, select Clear All Records > .
NOTE: This does not delete any saved activities.
Viewing Data Totals
You can view the accumulated distance and time data saved to your watch.
1From the watch face, hold UP.
2Select History > Totals.
3Select an activity.
4Select an option to view weekly or monthly totals.
Viewing Your Time in Each Heart Rate Zone
Viewing your time in each heart rate zone can help you adjust your training intensity.
1From the watch face, hold UP.
2Select History.
3Select This Week or Previous Weeks
4Select an activity.
5Press START, and select Heart Rate.
Deleting History
1From the watch face, hold UP.
2Select History > Options.
3Select an option:
Select Delete All Activities to delete all activities from the history.
Select Reset Totals to reset all distance and time totals.
NOTE: This does not delete any saved activities.
Data Management
NOTE: The device is not compatible with Windows® 95, 98, Me, Windows NT®, and Mac® OS 10.3 and earlier.
History 51
Deleting Files
NOTICE
If you do not know the purpose of a file, do not delete it. Your device memory contains important system files
that should not be deleted.
1Open the Garmin drive or volume.
2If necessary, open a folder or volume.
3Select a file.
4Press the Delete key on your keyboard.
NOTE: If you are using an Apple® computer, you must empty the Trash folder to completely remove the files.
Heart ate Features
The watch has a wrist-based heart rate monitor and is also compatible with chest heart rate monitors. You
can view heart rate data on the heart rate glance. If both wrist-based heart rate and chest heart rate data are
available, your watch uses the chest heart rate data.
There are several heart rate-related features available in the default glance loop.
Your current heart rate in beats per minute (bpm). There is graph of your heart rate for the last four hours,
highlighting your highest and lowest heart rate.
Your current stress level. The watch measures your heart rate variability while you are inactive to
estimate your stress level. A lower number indicates a lower stress level.
Your current Body Battery energy level. The watch calculates your current energy reserves based on
sleep, stress, and activity data. A higher number indicates a higher energy reserve.
The current saturation of oxygen in your blood. Knowing your oxygen saturation can help you determine
how your body is adapting to exercise and stress.
NOTE: The pulse oximeter sensor is located on the back of the watch.
Wrist-based Heart Rate
Wrist Heart Rate Monitor Settings
Hold UP, and select Health & Wellness > Wrist Heart Rate.
Status: Enables or disables the wrist heart rate monitor. The default value is Auto, which automatically uses the
wrist heart rate monitor unless you pair an external heart rate monitor.
NOTE: Disabling the wrist heart rate monitor also disables the wrist-based pulse oximeter sensor.
While Swimming: Enables or disables the wrist heart rate monitor during swimming activities.
Abnormal Heart Rate Alerts: Allows you to set the watch to alert you when your heart rate exceeds or drops
below a target value (Setting an Abnormal Heart Rate Alert, page53).
Broadcast Heart Rate: Allows you to begin broadcasting your heart rate data to a paired device (Broadcasting
Heart Rate Data, page54).
52 Heart Rate Features
Tips for Erratic Heart Rate Data
If the heart rate data is erratic or does not appear, you can try these tips.
Clean and dry your arm before putting on the watch.
Avoid wearing sunscreen, lotion, and insect repellent under the watch.
Avoid scratching the heart rate sensor on the back of the watch.
Wear the watch above your wrist bone. The watch should be snug but comfortable.
Wait until the icon is solid before starting your activity.
Warm up for 5 to 10 minutes and get a heart rate reading before starting your activity.
NOTE: In cold environments, warm up indoors.
Rinse the watch with fresh water after each workout.
Turning Off the Wrist-based Heart Rate Monitor
The default value for the Wrist Heart Rate setting is Auto. The watch automatically uses the wrist-based heart
rate monitor unless you pair a compatible heart rate monitor with ANT+ or Bluetooth technology to the watch.
NOTE: Disabling the wrist-based heart rate monitor also disables the wrist-based pulse oximeter sensor.
1From the watch face, hold .
2Select Health & Wellness > Wrist Heart Rate > Status > Off.
Heart Rate While Swimming
NOTICE
The device is intended for surface swimming. Scuba diving with the device may damage the product and will
void the warranty.
The watch has wrist-based heart rate enabled for swim activities. The watch is also compatible with the
HRM-Pro series, HRM-Swim, and HRM-Tri accessories. If both wrist-based heart rate and chest heart rate data
are available, your watch uses the chest heart rate data (Chest Heart Rate While Swimming, page65).
Setting an Abnormal Heart Rate Alert
CAUTION
This feature only alerts you when your heart rate exceeds or drops below a certain number of beats per minute,
as selected by the user, after a period of inactivity. This feature does not notify you of any potential heart
condition and is not intended to treat or diagnose any medical condition or disease. Always defer to your health
care provider for any heart-related issues.
You can set the heart rate threshold value.
1From the watch face, hold .
2Select Health & Wellness > Wrist Heart Rate > Abnormal Heart Rate Alerts.
3Select High Alert or Low Alert.
4Set the heart rate threshold value.
Each time your heart rate exceeds or drops below the threshold value, a message appears and the watch
vibrates.
Heart Rate Features 53
Broadcasting Heart Rate Data
You can broadcast your heart rate data from your watch and view it on paired devices. Broadcasting heart rate
data decreases battery life.
TIP: You can customize the activity settings to broadcast your heart rate data automatically when you begin
an activity (Activities and Apps, page3). For example, you can broadcast your heart rate data to an Edge bike
computer while cycling.
1Select an option:
Hold UP, and select Health & Wellness > Wrist Heart Rate > Broadcast Heart Rate.
Hold LIGHT to open the controls menu, and select .
NOTE: You can add options to the controls menu (Customizing the Controls Menu, page35).
2Press START.
The watch starts broadcasting your heart rate data.
3Pair your watch with your compatible device.
NOTE: The pairing instructions differ for each Garmin compatible device. See your owner's manual.
4Press STOP to stop broadcasting your heart rate data.
Pulse Oximeter
Your watch has a wrist-based pulse oximeter to gauge the peripheral saturation of oxygen in your blood (SpO2).
As your altitude increases, the level of oxygen in your blood can decrease. Knowing your oxygen saturation can
help you determine how your body is acclimating to high altitudes for alpine sport and expedition.
You can manually begin a pulse oximeter reading by viewing the pulse oximeter glance (Getting Pulse Oximeter
Readings, page55). You can also turn on all-day readings (Turning On All-Day Mode, page55). When you
view the pulse oximeter glance while you are not moving, your watch analyzes your oxygen saturation and your
elevation. The elevation profile helps indicate how your pulse oximeter readings are changing, relative to your to
elevation.
On the watch, your pulse oximeter reading appears as an oxygen saturation percentage and color on the graph.
On your Garmin Connect account, you can view additional details about your pulse oximeter readings, including
trends over multiple days.
For more information about pulse oximeter accuracy, go to garmin.com/ataccuracy.
54 Heart Rate Features
The elevation scale.
A graph of your average oxygen saturation readings for the last 24 hours.
Your most recent oxygen saturation reading.
The oxygen saturation percentage scale.
A graph of your elevation readings for the last 24 hours.
Getting Pulse Oximeter Readings
You can manually begin a pulse oximeter reading by viewing the pulse oximeter glance. The glance displays
your most recent blood oxygen saturation percentage, a graph of your hourly average readings for the last 24
hours, and a graph of your elevation for the last 24 hours.
NOTE: The first time you view the pulse oximeter glance, the watch must acquire satellite signals to determine
your elevation. You should go outside, and wait while the watch locates satellites.
1While you are sitting or inactive, press UP or DOWN to view the pulse oximeter glance.
2Press START to view glance details.
3Press START, and select Take Reading to begin a pulse oximeter reading.
4Remain motionless for up to 30 seconds.
NOTE: If you are too active for the watch to get a pulse oximeter reading, a message appears instead of a
percentage. You can check again after several minutes of inactivity. For best results, hold the arm wearing
the watch at heart level while the watch reads your blood oxygen saturation.
Turning On Pulse Oximeter Sleep Tracking
You can set your device to continuously measure your blood oxygen saturation while you sleep.
NOTE: Unusual sleep positions can cause abnormally low sleep-time SpO2 readings.
1From the pulse oximeter glance, hold UP.
2Select Pulse Ox Options > During Sleep.
Turning On All-Day Mode
1From the pulse oximeter glance, hold UP.
2Select Pulse Ox Options > All Day.
The device automatically analyzes your oxygen saturation throughout the day, when you are not moving.
NOTE: Turning on all-day mode decreases battery life.
Tips for Erratic Pulse Oximeter Data
If the pulse oximeter data is erratic or does not appear, you can try these tips.
Remain motionless while the watch reads your blood oxygen saturation.
Wear the watch above your wrist bone. The watch should be snug but comfortable.
Hold the arm wearing the watch at heart level while the watch reads your blood oxygen saturation.
Use a silicone or nylon band.
Clean and dry your arm before putting on the watch.
Avoid wearing sunscreen, lotion, and insect repellent under the watch.
Avoid scratching the optical sensor on the back of the watch.
Rinse the watch with fresh water after each workout.
Heart Rate Features 55
Navigation
You can use the GPS navigation features on your device to view your path on a map, save locations, and find
your way home.
Courses
You can send a course from your Garmin Connect account to your device. After it is saved to your device, you
can navigate the course on your device.
You can follow a saved course simply because it is a good route. For example, you can save and follow a bike
friendly commute to work.
You can also follow a saved course, trying to match or exceed previously set performance goals. For example,
if the original course was completed in 30 minutes, you can race against a Virtual Partner trying to complete the
course in under 30 minutes.
Following a Course on Your Device
1From the watch face, press START.
2Select an activity.
3Hold UP.
4Select Navigation > Courses.
5Select a course.
6Select Do Course.
Navigation information appears.
7Press START to begin navigation.
Creating a Course on Garmin Connect
Before you can create a course on the Garmin Connect app, you must have a Garmin Connect account (Garmin
Connect, page77).
1From the Garmin Connect app, select or .
2Select Training & Planning > Courses > Create Course.
3Select a course type.
4Follow the on-screen instructions.
5Select Done.
NOTE: You can send this course to your device (Sending a Course to Your Device, page56).
Sending a Course to Your Device
You can send a course you created using the Garmin Connect app to your device (Creating a Course on Garmin
Connect, page56).
1From the Garmin Connect app, select or .
2Select Training & Planning > Courses.
3Select a course.
4Select > Send to Device.
5Select your compatible device.
6Follow the on-screen instructions.
56 Navigation
Viewing Course Details
You can view course details before you navigate a course.
1Press START.
2Select an activity.
3Hold UP.
4Select Navigation > Courses.
5Press START to select a course.
6Select an option:
To begin navigation, select Do Course.
To create a custom pace band, select PacePro.
To view the course on the map and pan or zoom the map, select Map.
To begin the course in reverse, select Do Course in Reverse.
To view an elevation plot of the course, select Elevation Plot.
To change the course name, select Name.
To delete the course, select Delete.
Saving Your Location
You can save your current location to navigate back to it later.
NOTE: You can add options to the controls menu (Customizing the Controls Menu, page35).
1Hold LIGHT.
2Select Save Location.
3Follow the on-screen instructions.
Viewing and Editing Your Saved Locations
TIP: You can save a location from the controls menu (Controls, page32).
1Press START.
2Select an activity.
3Hold UP.
4Select Navigation > Saved Locations.
5Select a saved location.
6Select an option to view or edit the location details.
Navigating to a Destination
You can use your device to navigate to a destination or follow a course.
1Press START.
2Select an activity.
3Hold UP.
4Select Navigation.
5Select a category.
6Respond to the on-screen prompts to choose a destination.
7Select Go To.
Navigation information appears.
8Press START to begin navigation.
Navigation 57
Navigating to Your Starting Point During an Activity
You can navigate back to the starting point of your current activity in a straight line or along the path you
traveled. This feature is available only for activities that use GPS.
1During an activity, press STOP.
2Select Back to Start, and select an option:
To navigate back to the starting point of your activity along the path you traveled, select TracBack.
To navigate back to the starting point of your activity in a straight line, select Straight Line.
Your current location and the track to follow appear on the map.
Stopping Navigation
To stop navigation and continue your activity, hold UP, and select Stop Navigation or Stop Course.
To stop navigation and save your activity, press STOP, and select Save.
Map
represents your location on the map. Location names and symbols appear on the map. When you are
navigating to a destination, your route is marked with a line on the map.
Map navigation (Panning and Zooming the Map, page59)
Map settings (Map Settings, page59)
Adding a Map to an Activity
You can add the map to the data screens loop for an activity.
1Hold UP.
2Select Activities & Apps.
3Select the activity to customize.
4Select the activity settings.
5Select Data Screens > Add New > Map.
58 Navigation
Panning and Zooming the Map
1While navigating, press UP or DOWN to view the map.
2Hold UP.
3Select Pan/Zoom.
4Select an option:
To toggle between panning up and down, panning left and right, or zooming, press START.
To pan or zoom the map, press UP and DOWN.
To quit, press BACK.
Map Settings
You can customize how the map appears in the map app and data screens.
Hold UP, and select Map.
Orientation: Sets the orientation of the map. The North Up option shows north at the top of the screen. The
Track Up option shows your current direction of travel at the top of the screen.
User Locations: Shows or hides saved locations on the map.
Auto Zoom: Automatically selects the zoom level for optimal use of your map. When disabled, you must zoom
in or out manually.
Compass
The watch has a 3-axis compass with automatic calibration. The compass features and appearance change
depending on your activity, whether GPS is enabled, and whether you are navigating to a destination. You can
change the compass settings manually (Compass Settings, page88).
Altimeter and Barometer
The watch contains an internal altimeter and barometer. The watch collects elevation and pressure data
continuously, even in low-power mode. The altimeter displays your approximate elevation based on pressure
changes. The barometer displays environmental pressure data based on the fixed elevation where the altimeter
was most recently calibrated (Altimeter Settings, page89, Barometer Settings, page89).
Sensors and Accessories
The Forerunner watch has several internal sensors, and you can pair additional wireless sensors for your
activities.
Sensors and Accessories 59
Wireless Sensors
Your watch can be paired and used with wireless sensors using ANT+ or Bluetooth technology (Pairing
Your Wireless Sensors, page61). After the devices are paired, you can customize the optional data fields
(Customizing the Data Screens, page85). If your watch was packaged with a sensor, they are already paired.
For information about specific Garmin sensor compatibility, purchasing, or to view the owner's manual, go to
buy.garmin.com for that sensor.
Sensor Type Description
eBike You can use your watch with your eBike and view bike data, such as battery and shifting
information, during your rides.
Extended
Display
You can use the Extended Display mode to display data screens from your Forerunner music
watch on a compatible Edge bike computer during a ride or triathlon.
External HR
You can use an external heart rate monitor, such as the HRM-Pro series or HRM-Dual, and
view heart rate data during your activities. Some heart rate monitors can also store data or
provide advanced running data (Running Dynamics, page62) (Running Power, page62).
Foot Pod You can use a foot pod to record pace and distance instead of using GPS when you are
training indoors or when your GPS signal is weak.
Headphones You can use Bluetooth headphones to listen to music loaded onto your Forerunner music
watch (Connecting Bluetooth Headphones, page72).
Lights You can use Varia smart bike lights to improve situational awareness.
Power
You can use a power meter, such as Rally and Vector, to view your power data on your
watch. You can adjust your power zones to match your goals and abilities (Setting Your Power
Zones, page70), or use range alerts to be notified when you reach a specified power zone
(Setting an Alert, page87).
Radar You can use a Varia rearview bike radar to improve situational awareness and send alerts
about approaching vehicles.
RD Pod You can use a Running Dynamics Pod to record running dynamics data and view it on your
watch (Running Dynamics, page62).
Smart Trainer You can use your watch with an indoor bike smart trainer to simulate resistance while
following a course, ride, or workout (Using an Indoor Trainer, page12).
Spd./Cad.
You can attach speed or cadence sensors to your bike and view the data during your ride. If
necessary, you can manually enter your wheel circumference (Wheel Size and Circumference,
page113).
Tempe You can attach the tempe temperature sensor to a secure strap or loop where it is exposed to
ambient air, so it provides a consistent source of accurate temperature data.
VIRB The VIRB remote function allows you to control your VIRB action camera using your watch
(VIRB Remote, page66).
60 Sensors and Accessories
Pairing Your Wireless Sensors
Before you can pair, you must put on the heart rate monitor or install the sensor.
The first time you connect a wireless sensor to your watch using ANT+ or Bluetooth technology, you must pair
the watch and sensor. If the sensor has both ANT+ and Bluetooth technology, Garmin recommends that you
pair using ANT+ technology. After they are paired, the watch connects to the sensor automatically when you
start an activity and the sensor is active and within range.
1Bring the watch within 3m (10ft.) of the sensor.
NOTE: Stay 10m (33ft.) away from other wireless sensors while pairing.
2Hold UP.
3Select Sensors & Accessories > Add New.
4Select an option:
Select Search All.
Select your sensor type.
After the sensor is paired with your watch, the sensor status changes from Searching to Connected. Sensor
data appears in the data screen loop or a custom data field. You can customize the optional data fields
(Customizing the Data Screens, page85).
HRM-Pro Running Pace and Distance
The HRM-Pro series accessory calculates your running pace and distance based on your user profile and the
motion measured by the sensor on every stride. The heart rate monitor provides running pace and distance
when GPS is not available, such as during treadmill running. You can view your running pace and distance on
your compatible Forerunner watch when connected using ANT+ technology. You can also view it on compatible
third-party training apps when connected using Bluetooth technology.
The pace and distance accuracy improves with calibration.
Automatic calibration: The default setting for your watch is Auto Calibrate. The HRM-Pro series accessory
calibrates each time you run outside with it connected to your compatible Forerunner watch.
NOTE: Automatic calibration does not work for indoor, trail, or ultra run activity profiles (Tips for Recording
Running Pace and Distance, page61).
Manual calibration: You can select Calibrate & Save after a treadmill run with your connected HRM-Pro series
accessory (Calibrating the Treadmill Distance, page10).
Tips for Recording Running Pace and Distance
Update your Forerunner watch software (Product Updates, page97).
Complete several outdoor runs with GPS and your connected HRM-Pro series accessory. It's important that
your outdoor range of paces matches your range of paces on the treadmill.
If your run includes sand or deep snow, go to the sensor settings, and turn off Auto Calibrate.
If you previously connected a compatible foot pod using ANT+ technology, set the foot pod status to Off, or
remove it from the list of connected sensors.
Complete a treadmill run with manual calibration (Calibrating the Treadmill Distance, page10).
If automatic and manual calibrations don't seem accurate, go to the sensor settings, and select HRM Pace &
Distance > Reset Calibration Data.
NOTE: You can try turning off Auto Calibrate, and then manually calibrate again (Calibrating the Treadmill
Distance, page10).
Sensors and Accessories 61
Running Power
Garmin running power is calculated using measured running dynamics information, user mass, environmental
data, and other sensor data. The power measurement estimates the amount of power a runner applies to the
road surface, and it is displayed in watts. Using running power as a gauge of effort may suit some runners
better than using either pace or heart rate. Running power can be more responsive than heart rate for indicating
the level of effort, and it can account for the uphills, downhills, and wind, which a pace measurement does not
do. For more information, go to www.garmin.com/performance-data/running/.
Running power can be measured using a compatible running dynamics accessory or the watch sensors. You
can customize the running power data fields to view your power output and make adjustments to your training
(Data Fields, page102). You can set up power alerts to be notified when you reach a specified power zone
(Activity Alerts, page86).
Running power zones are similar to cycling power zones. The values for the zones are default values based on
gender, weight, and average ability, and may not match your personal abilities. You can manually adjust your
zones on the watch or using your Garmin Connect account (Setting Your Power Zones, page70).
Running Power Settings
Hold UP, select Activities & Apps, select a running activity, and select the activity settings.
Status: Enables or disables recording Garmin running power data. You can use this setting if you prefer to use
third-party running power data.
Source: Allows you to select which device to use to record running power data. The Smart Mode option
automatically detects and uses the running dynamics accessory, when available. The watch uses wrist-based
running power data when an accessory is not connected.
Account for Wind: Enables or disables using wind data when calculating your running power. Wind data is a
combination of the speed, heading, and barometer data from your watch and the available wind data from
your phone.
Running Dynamics
Running dynamics is real-time feedback about your running form. Your Forerunner watch has an accelerometer
to calculate five running form metrics. For all six running form metrics, you must pair your Forerunner watch
with the HRM-Pro series accessory or other running dynamics accessory that measures torso movement. For
more information, go to www.garmin.com/performance-data/running/.
Metric Sensor Type Description
Cadence Watch or compatible
accessory
Cadence is the number of steps per minute. It displays the total
steps (right and left combined).
Vertical oscil
lation
Watch or compatible
accessory
Vertical oscillation is your bounce while running. It displays the
vertical motion of your torso, measured in centimeters.
Ground contact
time
Watch or compatible
accessory
Ground contact time is the amount of time in each step that you
spend on the ground while running. It is measured in milliseconds.
NOTE: Ground contact time and balance are not available while
walking.
Ground contact
time balance
Compatible accessory
only
Ground contact time balance displays the left/right balance of your
ground contact time while running. It displays a percentage. For
example, 53.2 with an arrow pointing left or right.
Stride length Watch or compatible
accessory
Stride length is the length of your stride from one footfall to the next.
It is measured in meters.
Vertical ratio Watch or compatible
accessory
Vertical ratio is the ratio of vertical oscillation to stride length. It
displays a percentage. A lower number typically indicates better
running form.
62 Sensors and Accessories
Training with Running Dynamics
The watch automatically uses wrist-based running dynamics unless you pair a compatible running dynamics
accessory (Pairing Your Wireless Sensors, page61). You can add a running dynamics screen to any running
activity (Customizing the Data Screens, page85).
1Press START, and select a running activity.
2Press START to start the activity timer.
3Go for a run.
4Scroll to the running dynamics screen to view your metrics.
REMEMBER: Ground contact time balance is only available if you are using a compatible running dynamics
accessory.
5If necessary, hold UP to edit how the running dynamics data appears.
Sensors and Accessories 63
Color Gauges and Running Dynamics Data
The running dynamics screens display a color gauge for the primary metric. You can display cadence, vertical
oscillation, ground contact time, ground contact time balance, or vertical ratio as the primary metric. The color
gauge shows you how your running dynamics data compare to those of other runners. The color zones are
based on percentiles.
Garmin has researched many runners of all different levels. The data values in the red or orange zones are
typical for less experienced or slower runners. The data values in the green, blue, or purple zones are typical
for more experienced or faster runners. More experienced runners tend to exhibit shorter ground contact times,
lower vertical oscillation, lower vertical ratio, and higher cadence than less experienced runners. However, taller
runners typically have slightly slower cadences, longer strides, and slightly higher vertical oscillation. Vertical
ratio is your vertical oscillation divided by stride length. It is not correlated with height.
Go to www.garmin.com/performance-data/running/ for more information on running dynamics. For additional
theories and interpretations of running dynamics data, you can search reputable running publications and
websites.
Color Zone Percentile in Zone Cadence Range Ground Contact Time Range
Purple >95 >183spm <218ms
Blue 70–95 174–183spm 218–248ms
Green 30–69 164–173spm 249–277ms
Orange 5–29 153–163spm 278–308ms
Red <5 <153spm >308ms
Ground Contact Time Balance Data
Ground contact time balance measures your running symmetry and appears as a percentage of your total
ground contact time. For example, 51.3% with an arrow pointing left indicates the runner is spending more time
on the ground when on the left foot. If your data screen displays both numbers, for example 48–52, 48% is the
left foot and 52% is the right foot.
Color Zone Red Orange Green Orange Red
Symmetry Poor Fair Good Fair Poor
Percent of Other Runners 5% 25% 40% 25% 5%
Ground Contact Time Balance >52.2%L 50.8–52.2%L 50.7%L–50.7%R 50.8–52.2%R >52.2%R
While developing and testing running dynamics, the Garmin team found correlations between injuries and
greater imbalances with certain runners. For many runners, ground contact time balance tends to deviate
further from 50–50 when running up or down hills. Most running coaches agree that a symmetrical running
form is good. Elite runners tend to have quick and balanced strides.
You can watch the gauge or data field during your run or view the summary on your Garmin Connect account
after your run. As with the other running dynamics data, ground contact time balance is a quantitative
measurement to help you learn about your running form.
64 Sensors and Accessories
Vertical Oscillation and Vertical Ratio Data
The data ranges for vertical oscillation and vertical ratio are slightly different depending on the sensor and
whether it is positioned at the chest (HRM-Pro series, HRM-Run, or HRM-Tri accessories) or at the waist
(Running Dynamics Pod accessory).
Color Zone Percentile in
Zone
Vertical Oscillation
Range at Chest
Vertical Oscillation
Range at Waist
Vertical Ratio at
Chest
Vertical Ratio at
Waist
Purple >95 <6.4cm <6.8cm <6.1% <6.5%
Blue 70–95 6.4–8.1cm 6.8–8.9cm 6.1–7.4% 6.5–8.3%
Green 30–69 8.2–9.7cm 9.0–10.9cm 7.5–8.6% 8.4–10.0%
Orange 5–29 9.8–11.5cm 11.0–13.0cm 8.7–10.1% 10.1–11.9%
Red <5 >11.5cm >13.0cm >10.1% >11.9%
Tips for Missing Running Dynamics Data
This topic provides tips for using a compatible running dynamics accessory. If the accessory is not connected
to your watch, the watch automatically switches to wrist-based running dynamics.
Make sure you have a running dynamics accessory, such as the HRM-Pro series accessory.
Accessories with running dynamics have on the front of the module.
Pair the running dynamics accessory with your watch again, according to the instructions.
If you are using the HRM-Pro series accessory, pair it with your watch using ANT+ technology, rather than
Bluetooth technology.
If the running dynamics data display shows only zeros, make sure the accessory is worn right-side up.
NOTE: Ground contact time and balance appears only while running. It is not calculated while walking.
REMEMBER: Ground contact time balance is not calculated with wrist-based running dynamics.
Chest Heart Rate While Swimming
The HRM-Pro series, HRM-Swim, and HRM-Tri heart rate accessories record and store your heart rate data
while you are swimming. To view your heart rate data, you can add heart rate data fields (Customizing the Data
Screens, page85).
NOTE: Chest heart rate data is not visible on compatible watches while the heart rate monitor is underwater.
You must start a timed activity on your paired watch to view stored heart rate data later. During rest intervals
when out of the water, the heart rate accessory sends your heart rate data to your watch. Your watch
automatically downloads stored heart rate data when you save your timed swim activity. Your heart rate
accessory must be out of the water, active, and within range of the watch (3m) while data downloads. Your
heart rate data can be reviewed in the watch history and on your Garmin Connect account.
If both wrist-based heart rate and chest heart rate data are available, your watch uses the chest heart rate data.
Using an Optional Bike Speed or Cadence Sensor
You can use a compatible bike speed or cadence sensor to send data to your watch.
Pair the sensor with your watch (Pairing Your Wireless Sensors, page61).
Set your wheel size (Wheel Size and Circumference, page113).
Go for a ride (Starting an Activity, page3).
Sensors and Accessories 65
Training with Power Meters
Go to buy.garmin.com for a list of power meters that are compatible with your Forerunner device (such as
Rally and Vector).
For more information, see the owner's manual for your power meter.
Adjust your power zones to match your goals and abilities (Setting Your Power Zones, page70).
Use range alerts to be notified when you reach a specified power zone (Setting an Alert, page87).
Customize the power data fields (Customizing the Data Screens, page85).
Situational Awareness
Your Forerunner watch can be used with the Varia smart bike lights and rearview radar to improve situational
awareness. See the owner's manual for your Varia device for more information.
Using the Varia Camera Controls
NOTICE
Some jurisdictions may prohibit or regulate the recording of video, audio, or photographs, or may require that
all parties have knowledge of the recording and provide consent. It is your responsibility to know and follow all
laws, regulations, and any other restrictions in jurisdictions where you plan to use this device.
Before you can use the Varia camera controls, you must pair the accessory with your watch (Pairing Your
Wireless Sensors, page61).
1Add the RCT Camera glance to your watch (Glances, page14).
2From the RCT Camera glance, select an option:
Select to view the camera settings.
Select to take a photo.
Select to save a clip.
tempe
Your device is compatible with the tempe temperature sensor. You can attach the sensor to a secure strap or
loop where it is exposed to ambient air, so it provides a consistent source of accurate temperature data. You
must pair the tempe sensor with your device to display temperature data. See the instructions for your tempe
sensor for more information (www.garmin.com/manuals/tempe).
VIRB Remote
The VIRB remote function allows you to control your VIRB action camera using your device.
66 Sensors and Accessories
Controlling a VIRB Action Camera
Before you can use the VIRB remote function, you must enable the remote setting on your VIRB camera. See the
VIRB Series Owner's Manual for more information.
1Turn on your VIRB camera.
2Pair your VIRB camera with your Forerunner watch (Pairing Your Wireless Sensors, page61).
The VIRB glance is automatically added to the glance loop.
3Press UP or DOWN from the watch face to view the VIRB glance.
4If necessary, wait while your watch connects to your camera.
5Select an option:
To record video, select Start Recording.
The video counter appears on the Forerunner screen.
To take a photo while recording video, press DOWN.
To stop recording video, press STOP.
To take a photo, select Take Photo.
To take multiple photos in burst mode, select Take Burst.
To send the camera to sleep mode, select Sleep Camera.
To wake the camera from sleep mode, select Wake Camera.
To change video and photo settings, select Settings.
Controlling a VIRB Action Camera During an Activity
Before you can use the VIRB remote function, you must enable the remote setting on your VIRB camera. See the
VIRB Series Owner's Manual for more information.
1Turn on your VIRB camera.
2Pair your VIRB camera with your Forerunner watch (Pairing Your Wireless Sensors, page61).
When the camera is paired, a VIRB data screen is automatically added to activities.
3During an activity, press UP or DOWN to view the VIRB data screen.
4If necessary, wait while your watch connects to your camera.
5Hold UP.
6Select VIRB.
7Select an option:
To control the camera using the activity timer, select Settings > Recording Mode > Timer Start/Stop.
NOTE: Video recording automatically starts and stops when you start and stop an activity.
To control the camera using the menu options, select Settings > Recording Mode > Manual.
To manually record video, select Start Recording.
The video counter appears on the Forerunner screen.
To take a photo while recording video, press DOWN.
To manually stop recording video, press STOP.
To take multiple photos in burst mode, select Take Burst.
To send the camera to sleep mode, select Sleep Camera.
To wake the camera from sleep mode, select Wake Camera.
User Profile
You can update your user profile on your watch or on the Garmin Connect app.
User Profile 67
Setting Up Your User Profile
You can update your sex, date of birth, height, weight, wrist, heart rate zone, power zone, and Critical Swim
Speed (CSS) settings (Recording a Critical Swim Speed Test, page42). The watch uses this information to
calculate accurate training data.
1Hold UP.
2Select User Profile.
3Select an option.
Gender Settings
When you first set up the watch, you must choose a sex. Most fitness and training algorithms are binary. For the
most accurate results, Garmin recommends selecting your sex assigned at birth. After the initial setup, you can
customize the profile settings in your Garmin Connect account.
Profile & Privacy: Enables you to customize the data on your public profile.
User Settings: Sets your sex. If you select Not Specified, the algorithms that require a binary input will use the
sex you specified when you first set up the watch.
Viewing Your Fitness Age
Your fitness age gives you an idea of how your fitness compares with a person of the same sex. Your watch
uses information, such as your age, body mass index (BMI), resting heart rate data, and vigorous activity history
to provide a fitness age. If you have a Garmin Index scale, your watch uses the body fat percentage metric
instead of BMI to determine your fitness age. Exercise and lifestyle changes can impact your fitness age.
NOTE: For the most accurate fitness age, complete the user profile setup (Setting Up Your User Profile, page68).
1Hold UP.
2Select User Profile > Fitness Age.
About Heart Rate Zones
Many athletes use heart rate zones to measure and increase their cardiovascular strength and improve their
level of fitness. A heart rate zone is a set range of heartbeats per minute. The five commonly accepted
heart rate zones are numbered from 1 to 5 according to increasing intensity. Generally, heart rate zones are
calculated based on percentages of your maximum heart rate.
Fitness Goals
Knowing your heart rate zones can help you measure and improve your fitness by understanding and applying
these principles.
Your heart rate is a good measure of exercise intensity.
Training in certain heart rate zones can help you improve cardiovascular capacity and strength.
If you know your maximum heart rate, you can use the table (Heart Rate Zone Calculations, page70) to
determine the best heart rate zone for your fitness objectives.
If you do not know your maximum heart rate, use one of the calculators available on the Internet. Some gyms
and health centers can provide a test that measures maximum heart rate. The default maximum heart rate is
220 minus your age.
68 User Profile
Setting Your Heart Rate Zones
The watch uses your user profile information from the initial setup to determine your default heart rate zones.
You can set separate heart rate zones for sport profiles, such as running, cycling, and swimming. For the most
accurate calorie data during your activity, set your maximum heart rate. You can also set each heart rate zone
and enter your resting heart rate manually. You can manually adjust your zones on the watch or using your
Garmin Connect account.
1Hold UP.
2Select User Profile > Heart Rate & Power Zones > Heart Rate.
3Select Max. Heart Rate, and enter your maximum heart rate.
4Select LTHR, and enter your lactate threshold heart rate.
You can perform a guided test to estimate your lactate threshold (Lactate Threshold, page24). You can
use the Auto Detection feature to automatically record your lactate threshold during an activity (Detecting
Performance Measurements Automatically, page70).
5Select Resting HR > Set Custom, and enter your resting heart rate.
You can use the average resting heart rate measured by your watch, or you can set a custom resting heart
rate.
6Select Zones > Based On.
7Select an option:
Select BPM to view and edit the zones in beats per minute.
Select %Max. HR to view and edit the zones as a percentage of your maximum heart rate.
Select %HRR to view and edit the zones as a percentage of your heart rate reserve (maximum heart rate
minus resting heart rate).
Select %LTHR to view and edit the zones as a percentage of your lactate threshold heart rate.
8Select a zone, and enter a value for each zone.
9Select Add Sport Heart Rate, and select a sport profile to add separate heart rate zones (optional).
10 Repeat the steps to add sport heart rate zones (optional).
Letting the Watch Set Your Heart Rate Zones
The default settings allow the watch to detect your maximum heart rate and set your heart rate zones as a
percentage of your maximum heart rate.
Verify that your user profile settings are accurate (Setting Up Your User Profile, page68).
Run often with the wrist or chest heart rate monitor.
Try a few heart rate training plans, available from your Garmin Connect account.
View your heart rate trends and time in zones using your Garmin Connect account.
User Profile 69
Heart Rate Zone Calculations
Zone % of Maximum Heart
Rate Perceived Exertion Benefits
1 50–60% Relaxed, easy pace, rhythmic breathing Beginning-level aerobic training,
reduces stress
2 60–70% Comfortable pace, slightly deeper
breathing, conversation possible
Basic cardiovascular training, good
recovery pace
3 70–80% Moderate pace, more difficult to hold
conversation
Improved aerobic capacity, optimal
cardiovascular training
4 80–90% Fast pace and a bit uncomfortable,
breathing forceful
Improved anaerobic capacity and
threshold, improved speed
5 90–100% Sprinting pace, unsustainable for long
period of time, labored breathing
Anaerobic and muscular endurance,
increased power
Setting Your Power Zones
The power zones use default values based on gender, weight, and average ability, and may not match your
personal abilities. If you know your functional threshold power (FTP) or threshold power (TP) value, you can
enter it and allow the software to calculate your power zones automatically. You can manually adjust your
zones on the watch or using your Garmin Connect account.
1Hold UP.
2Select User Profile > Heart Rate & Power Zones > Power.
3Select an activity.
4Select Based On.
5Select an option:
Select Watts to view and edit the zones in watts.
Select %FTP or % TP to view and edit the zones as a percentage of your threshold power.
6Select FTP or Threshold Power, and enter your value.
7Select a zone, and enter a value for each zone.
8If necessary, select Minimum, and enter a minimum power value.
Detecting Performance Measurements Automatically
The Auto Detection feature is turned on by default. The watch can automatically detect your maximum heart
rate and lactate threshold during an activity.
1Hold UP.
2Select User Profile > Heart Rate & Power Zones > Auto Detection.
3Select an option.
Music
NOTE: There are three different music playback options for your Forerunner music watch.
Third-party provider music
Personal audio content
Music stored on your phone
On a Forerunner music watch, you can download audio content to your watch from your computer or from a
third-party provider, so you can listen when your phone is not nearby. To listen to audio content stored on your
watch, you can connect Bluetooth headphones.
70 Music
Downloading Personal Audio Content
Before you can send your personal music to your watch, you must install the Garmin Express application on
your computer (www.garmin.com/express).
You can load your personal audio files, such as .mp3 and .m4a files, to a Forerunner music watch from your
computer. For more information, go to www.garmin.com/musicfiles.
1Connect the watch to your computer using the included USB cable.
2On your computer, open the Garmin Express application, select your watch, and select Music.
TIP: For Windows computers, you can select and browse to the folder with your audio files. For Apple
computers, the Garmin Express application uses your iTunes® library.
3In the My Music or iTunes Library list, select an audio file category, such as songs or playlists.
4Select the checkboxes for the audio files, and select Send to Device.
5If necessary, in the Forerunner music list, select a category, select the checkboxes, and select Remove From
Device to remove audio files.
Connecting to a Third-Party Provider
Before you can download music or other audio files to your watch from a supported third-party provider, you
must connect the provider to your watch.
Some third-party music provider options are already installed on your watch.
For more options, you can download the Connect IQ app on your phone (Downloading Connect IQ Features,
page78).
1Press START.
2Select Connect IQ Store.
3Follow the on-screen instructions to install a third-party music provider.
4Hold DOWN from any screen to open the music controls.
5Select the music provider.
NOTE: If you want to select another provider, hold UP, select Music Providers, and follow the on-screen
instructions.
Downloading Audio Content from a Third-Party Provider
Before you can download audio content from a third-party provider, you must connect to a Wi‑Fi network
(Connecting to a Wi‑Fi Network, page76).
1Hold DOWN from any screen to open the music controls.
2Hold UP.
3Select Music Providers.
4Select a connected provider, or select Add Music Apps to add a music provider from the Connect IQ store.
5Select a playlist or other item to download to the watch.
6If necessary, press BACK until you are prompted to sync with the service.
NOTE: Downloading audio content can drain the battery. You may be required to connect the watch to an
external power source if the battery is low.
Disconnecting from a Third-Party Provider
1From the Garmin Connect app, select or .
2Select Garmin Devices, and select your watch.
3Select Music.
4Select an installed third-party provider, and follow the on-screen instructions to disconnect the third-party
provider from your watch.
Music 71
Connecting Bluetooth Headphones
1Bring the headphones within 2m (6.6ft.) of your watch.
2Enable pairing mode on the headphones.
3Hold UP.
4Select Music > Headphones > Add New.
5Select your headphones to complete the pairing process.
Listening to Music
1Hold DOWN from any screen to open the music controls.
2If necessary, connect your Bluetooth headphones (Connecting Bluetooth Headphones, page72).
3Hold UP.
4Select Music Providers, and select an option:
To listen to music downloaded to the watch from your computer, select My Music (Downloading Personal
Audio Content, page71).
To control music playback on your phone, select Control Phone.
To listen to music from a third-party provider, select the name of the provider, and select a playlist.
5Select .
72 Music
Music Playback Controls
NOTE: Music playback controls may look different, depending on the selected music source.
Select to view more music playback controls.
Select to browse the audio files and playlists for the selected source.
Select to adjust the volume.
Select to play and pause the current audio file.
Select to skip to the next audio file in the playlist.
Hold to fast forward through the current audio file.
Select to restart the current audio file.
Select twice to skip to the previous audio file in the playlist.
Hold to rewind through the current audio file.
Select to change the repeat mode.
Select to change the shuffle mode.
Controlling Music Playback on a Connected Phone
1On your phone, start playing a song or playlist.
2On your Forerunner music watch, hold DOWN from any screen to open the music controls.
3Hold UP.
4Select Music > Music Providers > Control Phone.
Changing the Audio Mode
You can change the music playback mode from stereo to mono.
1Hold UP.
2Select Music > Audio.
3Select an option.
Music 73
Connectivity
Connectivity features are available for your watch when you pair with your compatible phone (Pairing
Your Phone, page74). Additional features are available when you connect your watch to a Wi‑Fi network
(Connecting to a Wi‑Fi Network, page76).
Phone Connectivity Features
Phone connectivity features are available for your Forerunner watch when you pair it using the Garmin Connect
app (Pairing Your Phone, page74).
App features from the Garmin Connect app, the Connect IQ app, and more (Phone Apps and Computer
Applications, page76)
Glances (Glances, page14)
Controls menu features (Controls, page32)
Safety and tracking features (Safety and Tracking Features, page79)
Phone interactions, such as notifications (Enabling Bluetooth Notifications, page74)
Pairing Your Phone
To use the connected features on your watch, you must pair it directly through the Garmin Connect app, instead
of from the Bluetooth settings on your phone.
1During the initial setup on your watch, select when you are prompted to pair with your phone.
NOTE: If you previously skipped the pairing process, you can hold UP, and select Connectivity > Phone > Pair
Phone.
2Scan the QR code with your phone, and follow the on-screen instructions to complete the pairing and setup
process.
Enabling Bluetooth Notifications
Before you can enable notifications, you must pair the watch with a compatible phone (Pairing Your Phone,
page74).
1Hold UP.
2Select Connectivity > Phone > Notifications > Status > On.
3Select During Activity or General Use.
4Select a notification type.
5Select status, tone, and vibration preferences.
6Press BACK.
7Select privacy and timeout preferences.
8Press BACK.
9Select Signature to add a signature to your text message replies.
Viewing Notifications
1From the watch face, press UP or DOWN to view the notifications glance.
2Press START.
3Select a notification.
4Press START for more options.
5Press BACK to return to the previous screen.
74 Connectivity
Receiving an Incoming Phone Call
When you receive a phone call on your connected phone, the Forerunner watch displays the name or phone
number of the caller.
To accept the call, select START.
To decline the call, select DOWN.
To decline the call and immediately send a text message reply, select , and select a message from the list.
NOTE: To send a text message reply, you must be connected to a compatible Android phone using
Bluetooth technology.
Replying to a Text Message
NOTE: This feature is available only for compatible Android phones.
When you receive a text message notification on your watch, you can send a quick reply by selecting from a list
of messages. You can customize messages in the Garmin Connect app.
NOTE: This feature sends text messages using your phone. Regular text message limits and charges from your
carrier and phone plan may apply. Contact your mobile carrier for more information about text message charges
or limits.
1From the watch face, press UP or DOWN to view the notifications glance.
2Press START, and select a text message notification.
3Press START.
4Select Reply.
5Select a message from the list.
Your phone sends the selected message as an SMS text message.
Managing Notifications
You can use your compatible phone to manage notifications that appear on your Forerunner watch.
Select an option:
If you are using an iPhone®, go to the iOS® notifications settings to select the items to show on the watch.
If you are using an Android phone, from the Garmin Connect app, select Settings > Notifications.
Turning Off the Bluetooth Phone Connection
You can turn off the Bluetooth phone connection from the controls menu.
NOTE: You can add options to the controls menu (Customizing the Controls Menu, page35).
1Hold LIGHT to view the controls menu.
2Select to turn off the Bluetooth phone connection on your Forerunner watch.
Refer to the owner's manual for your phone to turn off Bluetooth technology on your phone.
Turning On and Off Phone Connection Alerts
You can set the Forerunner watch to alert you when your paired phone connects and disconnects using
Bluetooth technology.
NOTE: Phone connection alerts are turned off by default.
1Hold UP.
2Select Connectivity > Phone > Connected Alerts.
Connectivity 75
Playing Audio Prompts During an Activity
You can enable your Forerunner music watch to play motivational status announcements during a run or other
activity. Audio prompts play on your connected Bluetooth headphones, if available. Otherwise, audio prompts
play on your phone paired through the Garmin Connect app. During an audio prompt, the watch or phone mutes
the primary audio to play the announcement.
NOTE: This feature is not available for all activities.
1Hold UP.
2Select Audio Prompts.
3Select an option:
To hear a prompt for each lap, select Lap Alert.
To customize prompts with your pace and speed information, select Pace/Speed Alert.
To customize prompts with your heart rate information, select Heart Rate Alert.
To customize prompts with power data, select Power Alert.
To hear prompts when you start and stop the activity timer, including the Auto Pause® feature, select
Timer Events.
To hear workout alerts play as an audio prompt, select Workout Alerts.
To hear activity alerts play as an audio prompt, select Activity Alerts (Activity Alerts, page86).
To hear a sound play right before an audio alert or prompt, select Audio Tones.
To change the language or the dialect of the voice prompts, select Dialect.
WiFi Connectivity Features
Activity uploads to your Garmin Connect account: Automatically sends your activity to your Garmin Connect
account as soon as you finish recording the activity.
Audio content: Allows you to sync audio content from third-party providers.
Software updates: You can download and install the latest software.
Workouts and training plans: You can browse for and select workouts and training plans on the Garmin Connect
site. The next time your watch has a Wi‑Fi connection, the files are sent to your watch.
Connecting to a WiFi Network
You must connect your watch to the Garmin Connect app on your phone or to the Garmin Express application
on your computer before you can connect to a Wi‑Fi network.
1Hold UP.
2Select Connectivity > Wi-Fi > My Networks > Search for Networks.
The watch displays a list of nearby Wi‑Fi networks.
3Select a network.
4If necessary, enter the password for the network.
The watch connects to the network, and the network is added to the list of saved networks. The watch
reconnects to this network automatically when it is within range.
Phone Apps and Computer Applications
You can connect your watch to multiple Garmin phone apps and computer applications using the same Garmin
account.
76 Connectivity
Garmin Connect
You can connect with your friends on Garmin Connect. Garmin Connect gives you the tools to track, analyze,
share, and encourage each other. Record the events of your active lifestyle including runs, walks, rides, swims,
hikes, triathlons, and more. To sign up for a free account, you can download the app from the app store on your
phone , or go to connect.garmin.com.
Store your activities: After you complete and save an activity with your watch, you can upload that activity to
your Garmin Connect account and keep it as long as you want.
Analyze your data: You can view more detailed information about your activity, including time, distance,
elevation, heart rate, calories burned, cadence, running dynamics, an overhead map view, pace and speed
charts, and customizable reports.
NOTE: Some data requires an optional accessory such as a heart rate monitor.
Plan your training: You can choose a fitness goal and load one of the day-by-day training plans.
Track your progress: You can track your daily steps, join a friendly competition with your connections, and meet
your goals.
Share your activities: You can connect with friends to follow each other's activities or post links to your
activities on your favorite social networking sites.
Manage your settings: You can customize your watch and user settings on your Garmin Connect account.
Using the Garmin Connect App
After you pair your watch with your phone (Pairing Your Phone, page74), you can use the Garmin Connect app to
upload all of your activity data to your Garmin Connect account.
1Verify the Garmin Connect app is running on your phone.
2Bring your watch within 10m (30ft.) of your phone.
Your watch automatically syncs your data with the Garmin Connect app and your Garmin Connect account.
Updating the Sofware Using the Garmin Connect App
Before you can update your watch software using the Garmin Connect app, you must have a Garmin Connect
account, and you must pair the watch with a compatible phone (Pairing Your Phone, page74).
Sync your watch with the Garmin Connect app (Manually Syncing Data with Garmin Connect, page78).
When new software is available, the Garmin Connect app automatically sends the update to your watch.
Connectivity 77
Using Garmin Connect on Your Computer
The Garmin Express application connects your watch to your Garmin Connect account using a computer. You
can use the Garmin Express application to upload your activity data to your Garmin Connect account and to
send data, such as workouts or training plans, from the Garmin Connect website to your watch. You can also
add music to your watch (Downloading Personal Audio Content, page71). You can also install software updates
and manage your Connect IQ apps.
1Connect the watch to your computer using the USB cable.
2Go to www.garmin.com/express.
3Download and install the Garmin Express application.
4Open the Garmin Express application, and select Add Device.
5Follow the on-screen instructions.
Updating the Sofware Using Garmin Express
Before you can update your device software, you must have a Garmin Connect account, and you must download
the Garmin Express application.
1Connect the device to your computer using the USB cable.
When new software is available, Garmin Express sends it to your device.
2Follow the on-screen instructions.
3Do not disconnect your device from the computer during the update process.
NOTE: If you have already set up your device with Wi‑Fi connectivity, Garmin Connect can automatically
download available software updates to your device when it connects using Wi‑Fi.
Manually Syncing Data with Garmin Connect
NOTE: You can add options to the controls menu (Customizing the Controls Menu, page35).
1Hold LIGHT to view the controls menu.
2Select Sync.
Connect IQ Features
You can add Connect IQ apps, data fields, glances, music providers, and watch faces to your watch using the
Connect IQ store on your watch or phone.
Watch Faces: Customize the appearance of the clock.
Device Apps: Add interactive features to your watch, such as glances and new outdoor and fitness activity
types.
Data Fields: Download new data fields that present sensor, activity, and history data in new ways. You can add
Connect IQ data fields to built-in features and pages.
Music: Add music providers to your watch.
Downloading Connect IQ Features
Before you can download features from the Connect IQ app, you must pair your Forerunner watch with your
phone (Pairing Your Phone, page74).
1From the app store on your phone, install and open the Connect IQ app.
2If necessary, select your watch.
3Select a Connect IQ feature.
4Follow the on-screen instructions.
Downloading Connect IQ Features Using Your Computer
1Connect the watch to your computer using a USB cable.
2Go to apps.garmin.com, and sign in.
3Select a Connect IQ feature, and download it.
4Follow the on-screen instructions.
78 Connectivity
Safety and Tracking Features
CAUTION
The safety and tracking features are supplemental features and should not be relied on as a primary method to
obtain emergency assistance. The Garmin Connect app does not contact emergency services on your behalf.
NOTICE
To use the safety and tracking features, the Forerunner watch must be connected to the Garmin Connect app
using Bluetooth technology. Your paired phone must be equipped with a data plan and be in an area of network
coverage where data is available. You can enter emergency contacts in your Garmin Connect account.
For more information about safety and tracking features, go to www.garmin.com/safety.
Assistance: Allows you to send a message with your name, LiveTrack link, and GPS location (if available) to
your emergency contacts.
Incident detection: When the Forerunner watch detects an incident during certain outdoor activities, the watch
sends an automated message, LiveTrack link, and GPS location (if available) to your emergency contacts.
LiveTrack: Allows friends and family to follow your races and training activities in real time. You can invite
followers using email or social media, allowing them to view your live data on a web page.
Live Event Sharing: Allows you to send messages to friends and family during an event, providing real-time
updates.
NOTE: This feature is available only if your watch is connected to a compatible Android phone.
Adding Emergency Contacts
Emergency contact phone numbers are used for the safety and tracking features.
1From the Garmin Connect app, select or .
2Select Safety & Tracking > Safety Features > Emergency Contacts > Add Emergency Contacts.
3Follow the on-screen instructions.
Your emergency contacts receive a notification when you add them as an emergency contact, and can accept or
decline your request. If a contact declines, you must choose another emergency contact.
Adding Contacts
You can add up to 50 contacts to the Garmin Connect app. Contact emails can be used with the LiveTrack
feature. Three of these contacts can be used as emergency contacts (Adding Emergency Contacts, page79).
1From the Garmin Connect app, select or .
2Select Contacts.
3Follow the on-screen instructions.
After you add contacts, you must sync your data to apply the changes to your Forerunner device (Manually
Syncing Data with Garmin Connect, page78).
Safety and Tracking Features 79
Turning Incident Detection On and Off
CAUTION
Incident detection is a supplemental feature available only for certain outdoor activities. Incident detection
should not be relied on as a primary method to obtain emergency assistance. The Garmin Connect app does not
contact emergency services on your behalf.
NOTICE
Before you can enable incident detection on your watch, you must set up emergency contacts in the Garmin
Connect app (Adding Emergency Contacts, page79). Your paired phone must be equipped with a data plan and
be in an area of network coverage where data is available. Your emergency contacts must be able to receive
emails or text messages (standard text messaging rates may apply).
1From the watch face, hold UP.
2Select Safety & Tracking > Incident Detection.
3Select a GPS activity.
NOTE: Incident detection is available only for certain outdoor activities.
When an incident is detected by your Forerunner watch and your phone is connected, the Garmin Connect
app can send an automated text message and email with your name and GPS location (if available) to your
emergency contacts. A message appears on your device and paired phone indicating your contacts will be
informed after 15 seconds have elapsed. If assistance is not needed, you can cancel the automated emergency
message.
Requesting Assistance
NOTE: Your paired phone must be equipped with a data plan and be in an area of network coverage where data
is available.
Before you can request assistance, you must set up emergency contacts (Adding Emergency Contacts,
page79). Your emergency contacts must be able to receive emails or text messages (standard text messaging
rates may apply).
1Hold LIGHT.
2When you feel three vibrations, release the button to activate the assistance feature.
The countdown screen appears.
TIP: Before the countdown is complete, you can hold any button to cancel the message.
Live Event Sharing
Live event sharing allows you to send messages to friends and family during an event, providing real-time
updates including cumulative time and last lap time. Before the event, you can customize the list of recipients
and the message content in the Garmin Connect app.
Turning On Live Event Sharing
Before you can use live event sharing, you must set up the LiveTrack feature in the Garmin Connect app.
NOTE: LiveTrack features are available when your Forerunner watch is connected to the Garmin Connect app
using Bluetooth technology, with a compatible Android phone.
1In the Garmin Connect app, from the settings menu, select Safety & Tracking > Live Event Sharing.
You can customize the message triggers and options.
2Go outside, and select a GPS activity on your Forerunner watch.
NOTE: This feature is not available for all activities.
3Select > Live Event Sharing > Sharing.
Live event sharing is enabled for 24 hours.
4Select Recipients to add people from your contacts.
80 Safety and Tracking Features
Clocks
Setting an Alarm
You can set multiple alarms.
1From the watch face, hold UP.
2Select Clocks > Alarms > Add Alarm.
3Enter the alarm time.
Editing an Alarm
1From the watch face, hold UP.
2Select Clocks > Alarms.
3Select an alarm.
4Select an option:
To turn the alarm on or off, select Status.
To change the alarm time, select Time.
To set the alarm to repeat regularly, select Repeat, and select when the alarm should repeat.
To select the type of alarm notification, select Sound and Vibe.
To turn the display on or off with the alarm, select Brightness.
To select a description for the alarm, select Label.
To delete the alarm, select Delete.
Clocks 81
Using the Stopwatch
1From the watch face, hold UP.
2Select Clocks > Stopwatch.
3Press START to start the timer.
4Press BACK to restart the lap timer .
The total stopwatch time continues running.
5Press STOP to stop both timers.
6Select an option:
To reset both timers, press DOWN.
To save the stopwatch time as an activity, press UP, and select Save Activity.
To reset the timers and exit the stopwatch, press UP, and select Done.
To review the lap timers, press UP, and select Review.
NOTE: The Review option only appears if there have been multiple laps.
To return to the watch face without resetting the timers, press UP, and select Go To Watchface.
To enable or disable lap recording, press UP, and select Lap Key.
Starting the Countdown Timer
1From the watch face, hold UP.
2Select Clocks > Timers.
3Select an option:
To set and save a countdown timer for the first time, enter the time, press UP, and select Save Timer.
To set and save additional countdown timers, select Add Timer, and enter the time.
To set a countdown timer without saving it, select Quick Timer, and enter the time.
4If necessary, press UP, and select an option:
Select Time to change the time.
Select Restart > On to automatically restart the timer after it expires.
Select Sound and Vibe, and select a type of notification.
5Press START to start the timer.
82 Clocks
Deleting a Timer
1From the watch face, hold UP.
2Select Clocks > Timers.
3Select a timer.
4Press UP, and select Delete.
Syncing the Time with GPS
Each time you turn on the watch and acquire satellites, the watch automatically detects your time zones and the
current time of day. You can also manually sync the time with GPS when you change time zones, and to update
for daylight saving time.
1Hold UP.
2Select System > Time > Sync With GPS.
3Wait while the device locates satellites (Acquiring Satellite Signals, page98).
Setting the Time Manually
1From the watch face, hold UP.
2Select System > Time > Set Time > Manual.
3Select Time, and enter the time of day.
Customizing Your Watch
Activities and App Settings
These settings allow you to customize each preloaded activity app based on your needs. For example, you can
customize data pages and enable alerts and training features. Not all settings are available for all activity types.
Hold UP, select Activities & Apps, select an activity, and select the activity settings.
3D Distance: Calculates your distance traveled using your elevation change and your horizontal movement over
ground.
3D Speed: Calculates your speed using your elevation change and your horizontal movement over ground.
Accent Color: Sets the accent color of each activity to help identify which activity is active.
Add Activity: Allows you to customize a multisport activity.
Alerts: Sets the training or navigation alerts for the activity (Activity Alerts, page86).
Auto Climb: Enables the watch to detect elevation changes automatically using the built-in altimeter (Enabling
Auto Climb, page87).
Auto Pause: Sets the options for the Auto Pause feature to stop recording data when you stop moving or when
you drop below a specified speed. This feature is helpful if your activity includes stop lights or other places
where you must stop.
Auto Rest: Enables the watch to automatically detect when you are resting during a pool swim and create a rest
interval (Auto Rest and Manual Rest, page9).
Auto Scroll: Sets the watch to scroll through all of the activity data screens automatically while the activity timer
is running.
Auto Set: Enables the watch to start and stop exercise sets automatically during a strength training activity.
Broadcast Heart Rate: Enables automatic heart rate data broadcasting when you start the activity (Broadcasting
Heart Rate Data, page54).
Countdown Start: Enables a countdown timer for pool swimming intervals.
Data Screens: Enables you to customize data screens and add new data screens for the activity (Customizing
the Data Screens, page85).
Edit Weight: Allows you to add the weight used for an exercise set during a strength training or cardio activity.
GPS: Sets the satellite system to use for the activity (GPS Settings, page88).
Customizing Your Watch 83
Lane Number: Sets your lane number for track running.
Lap Key: Enables or disables the BACK button for recording a lap or rest during an activity.
Laps: Sets the options for the Auto Lap feature to automatically mark laps. The Auto Distance option marks laps
at a specific distance. When you complete a lap, a customizable lap alert message appears. This feature is
helpful for comparing your performance over different parts of an activity.
Lock Device: Locks the touchscreen and buttons during a multisport activity to prevent inadvertent button
presses and touchscreen swipes.
Metronome: Plays tones or vibrates at a steady rhythm to help you improve your performance by training at a
faster, slower, or more consistent cadence. You can set the beats per minute (bpm) of the cadence you want
to maintain, beat frequency, and sound settings.
Pool Size: Sets the pool length for pool swimming.
Power Averaging: Controls whether the watch includes zero values for bike power data that occur when you are
not pedaling.
Power Save Timeout: Sets the power-save timeout length for how long your watch stays in training mode, for
example, when you are waiting for a race to start. The Normal option sets the watch to enter low-power
watch mode after 5 minutes of inactivity. The Extended option sets the watch to enter low-power watch
mode after 25 minutes of inactivity. The extended mode can result in shorter battery life between charges.
Record Temperature: Records the ambient temperature around the watch during certain activities.
Record VO2 Max.: Enables VO2 max. recording for trail run and ultra run activities.
Rename: Sets the activity name.
Rep Counting: Enables or disables rep counting during a workout. The Workouts Only option enables rep
counting during guided workouts only.
Repeat: Enables the Repeat option for multisport activities. For example, you can use this option for activities
that include multiple transitions, such as a swimrun.
Restore Defaults: Allows you to reset the activity settings.
Running Power: Allows you to record running power data and customize the settings (Running Power Settings,
page62).
Runs: Sets the preferences for ski or snowboard runs. You can enable Auto Run to detect runs automatically
using the built-in accelerometer. You can also enable the Lap Key and theLap Alert settings.
Self Evaluation: Sets how often you evaluate your perceived effort for the activity (Evaluating an Activity,
page4).
Stroke Detection: Enables stroke detection for pool swimming.
Touch: Enables or disables the touchscreen during an activity.
Transitions: Enables transitions for multisport activities.
Vibration Alerts: Enables alerts that notify you to inhale or exhale during a breathwork activity.
Workout Videos: Enables instructive workout animations for activities including yoga and Pilates. Animations
are available for pre-installed workouts and workouts downloaded from your Garmin Connect account.
84 Customizing Your Watch
Customizing the Data Screens
You can show, hide, and change the layout and content of data screens for each activity.
1Hold UP.
2Select Activities & Apps.
3Select the activity to customize.
4Select the activity settings.
5Select Data Screens.
6Select a data screen to customize.
7Select an option:
Select Layout to adjust the number of data fields on the data screen.
Select Data Fields, and select a field to change the data that appears in the field.
TIP: For a list of all the available data fields, go to (Data Fields, page102). Not all data fields are available
for all activity types.
Select Reorder to change the location of the data screen in the loop.
Select Remove to remove the data screen from the loop.
8If necessary, select Add New to add a data screen to the loop.
You can add a custom data screen, or select one of the predefined data screens.
Adding a Map to an Activity
You can add the map to the data screens loop for an activity.
1Hold UP.
2Select Activities & Apps.
3Select the activity to customize.
4Select the activity settings.
5Select Data Screens > Add New > Map.
Customizing Your Watch 85
Activity Alerts
You can set alerts for each activity, which can help you to train toward specific goals, to increase your
awareness of your environment, and to navigate to your destination. Some alerts are available only for specific
activities. There are three types of alerts: event alerts, range alerts, and recurring alerts.
Event alert: An event alert notifies you one time. The event is a specific value. For example, you can set the
watch to alert you when you burn a specified number of calories.
Range alert: A range alert notifies you each time the watch is above or below a specified range of values. For
example, you can set the watch to alert you when your heart rate is below 60beats per minute (bpm) and
over 210bpm.
Recurring alert: A recurring alert notifies you each time the watch records a specified value or interval. For
example, you can set the watch to alert you every 30minutes.
Alert Name Alert Type Description
Cadence Range You can set minimum and maximum cadence values.
Calories Event, recurring You can set the number of calories.
Custom Event, recurring You can select an existing message or create a custom message and select an
alert type.
Distance Event, recurring You can set a distance interval.
Elevation Range You can set minimum and maximum elevation values.
Heart Rate Range You can set minimum and maximum heart rate values or select zone changes.
See About Heart Rate Zones, page68 and Heart Rate Zone Calculations, page70.
Pace Range You can set minimum and maximum pace values.
Pacing Recurring You can set a target swim pace.
Power Range You can set the high or low power level.
Proximity Event You can set a radius from a saved location.
Run/Walk Recurring You can set timed walking breaks at regular intervals.
Speed Range You can set minimum and maximum speed values.
Stroke Rate Range You can set high or low strokes per minute.
Time Event, recurring You can set a time interval.
Track Timer Recurring You can set a track time interval in seconds.
86 Customizing Your Watch
Setting an Alert
1Hold UP.
2Select Activities & Apps.
3Select an activity.
NOTE: This feature is not available for all activities.
4Select the activity settings.
5Select Alerts.
6Select an option:
Select Add New to add a new alert for the activity.
Select the alert name to edit an existing alert.
7If necessary, select the type of alert.
8Select a zone, enter the minimum and maximum values, or enter a custom value for the alert.
9If necessary, turn on the alert.
For event and recurring alerts, a message appears each time you reach the alert value. For range alerts, a
message appears each time you exceed or drop below the specified range (minimum and maximum values).
Enabling Auto Climb
You can use the auto climb feature to detect elevation changes automatically. You can use it during activities
such as climbing, hiking, running, or biking.
1Hold UP.
2Select Activities & Apps.
3Select an activity.
NOTE: This feature is not available for all activities.
4Select the activity settings.
5Select Auto Climb > Status.
6Select Always or When Not Navigating.
7Select an option:
Select Run Screen to identify which data screen appears while running.
Select Climb Screen to identify which data screen appears while climbing.
Select Invert Colors to reverse the display colors when changing modes.
Select Vertical Speed to set the rate of ascent over time.
Select Mode Switch to set how quickly the device changes modes.
NOTE: The Current Screen option allows you to automatically switch to the last screen you were viewing
before the auto climb transition occurred.
Customizing Your Watch 87
GPS Settings
You can change the GPS settings to customize the satellite systems used for each activity. For more
information about satellite systems, go to www.garmin.com/aboutGPS.
TIP: The GPS settings can impact battery life (Battery Life Information, page96).
Hold UP, select Activities & Apps, select an activity, select the activity settings, and select GPS.
NOTE: These settings are not available for all activities.
Off: Disables satellite systems for the activity.
GPS Only: Enables the GPS satellite system.
All Systems: Enables multiple satellite systems. Using multiple satellite systems together offers increased
performance in challenging environments and faster position acquisition than using GPS only.
All + Multi-Band: Enables multiple satellite systems on multiple frequency bands. Multi-band systems use
multiple frequency bands and allow for more consistent track logs, improved positioning, improved multi-
path errors, and fewer atmospheric errors when using the watch in challenging environments.
Auto Select: Enables the watch to use SatIQ technology to dynamically select the best multi-band system
based on your environment. The Auto Select setting offers the best positioning accuracy while still
prioritizing battery life.
UltraTrac: Records track points and sensor data less frequently. Enabling the UltraTrac feature increases
battery life but decreases the quality of recorded activities. You should use the UltraTrac feature for activities
that demand longer battery life and for which frequent sensor data updates are less important.
Sensors Settings
Compass Settings
Hold UP, and select Sensors & Accessories > Compass.
Calibrate: Allows you to manually calibrate the compass sensor (Calibrating the Compass Manually, page88).
Display: Sets the directional heading on the compass to letters, degrees, or milliradians.
North Ref.: Sets the north reference of the compass (Setting the North Reference, page89).
Mode: Sets the compass to use electronic-sensor data only (On), a combination of GPS and electronic-sensor
data when moving (Auto), or GPS data only (Off).
Calibrating the Compass Manually
NOTICE
Calibrate the electronic compass outdoors. To improve heading accuracy, do not stand near objects that
influence magnetic fields, such as vehicles, buildings, and overhead power lines.
Your watch was already calibrated at the factory, and the watch uses automatic calibration by default. If you
experience irregular compass behavior, for example, after moving long distances or after extreme temperature
changes, you can manually calibrate the compass.
1Hold UP.
2Select Sensors & Accessories > Compass > Calibrate.
3Follow the on-screen instructions.
TIP: Move your wrist in a small figure eight motion until a message appears.
88 Customizing Your Watch
Setting the North Reference
You can set the directional reference used in calculating heading information.
1Hold UP.
2Select Sensors & Accessories > Compass > North Ref..
3Select an option:
To set geographic north as the heading reference, select True.
To set the magnetic declination for your location automatically, select Magnetic.
To set grid north (000º) as the heading reference, select Grid.
To set the magnetic variation value manually, select User, enter the magnetic variance, and select Done.
Altimeter Settings
Hold UP, and select Sensors & Accessories > Altimeter.
Calibrate: Allows you to manually calibrate the altimeter sensor.
Auto Cal.: Allows the altimeter to self-calibrate each time you use satellite systems.
Sensor Mode: Sets the mode for the sensor. The Auto option uses both the altimeter and barometer according
to your movement. You can use the Altimeter Only option when your activity involves changes in altitude, or
the Barometer Only option when your activity does not involve changes in altitude.
Elevation: Sets the units of measure for elevation.
Calibrating the Barometric Altimeter
Your watch was already calibrated at the factory, and the watch uses automatic calibration at your GPS starting
point by default. You can manually calibrate the barometric altimeter if you know the correct elevation.
1Hold UP.
2Select Sensors & Accessories > Altimeter.
3Select an option:
To calibrate automatically from your GPS starting point, select Auto Cal., and select an option.
To enter the current elevation manually, select Calibrate > Enter Manually.
To enter the current elevation from your GPS starting point, select Calibrate > Use GPS.
Barometer Settings
Hold UP, and select Sensors & Accessories > Barometer.
Calibrate: Allows you to manually calibrate the barometer sensor.
Plot: Sets the time scale for the chart in the barometer glance.
Storm Alert: Sets the rate of barometric pressure change that triggers a storm alert.
Sensor Mode: Sets the mode for the sensor. The Auto option uses both the altimeter and barometer according
to your movement. You can use the Altimeter Only option when your activity involves changes in altitude, or
the Barometer Only option when your activity does not involve changes in altitude.
Pressure: Sets how the watch displays pressure data.
Calibrating the Barometer
Your watch was already calibrated at the factory, and the watch uses automatic calibration at your GPS starting
point by default. You can manually calibrate the barometer if you know the correct elevation or the correct sea
level pressure.
1Hold UP.
2Select Sensors & Accessories > Barometer > Calibrate.
3Select an option:
To enter the current elevation and sea level pressure (optional), select Enter Manually.
To calibrate automatically from your GPS starting point, select Use GPS.
Customizing Your Watch 89
Map Settings
You can customize how the map appears in the map app and data screens.
Hold UP, and select Map.
Orientation: Sets the orientation of the map. The North Up option shows north at the top of the screen. The
Track Up option shows your current direction of travel at the top of the screen.
User Locations: Shows or hides saved locations on the map.
Auto Zoom: Automatically selects the zoom level for optimal use of your map. When disabled, you must zoom
in or out manually.
Navigation Settings
You can customize the map features and appearance when navigating to a destination.
Customizing Navigation Data Screens
1Hold UP.
2Select Navigation > Data Screens.
3Select an option:
Select Map > Status to turn on or off the map.
Select Map > Data Field to turn on or off a data field that shows routing information on the map.
Select Up Ahead to turn on or off information about upcoming course points.
Select Compass to turn on or off the guide screen that displays the compass bearing or course to follow
while navigating.
Select Elevation Plot to turn on or off the elevation plot.
Select a screen to add, remove, or customize.
Setting Up a Heading Bug
You can set up a heading indicator to display on your data pages while navigating. The indicator points to your
target heading.
1Hold UP.
2Select Navigation > Heading Bug.
Setting Navigation Alerts
You can set alerts to help you navigate to your destination.
1Hold UP.
2Select Navigation > Alerts.
3Select an option:
To set an alert for a specified distance from your final destination, select Final Distance.
To set an alert for the estimated time remaining until you reach your final destination, select Final ETE.
To set an alert when you stray from the course, select Off Course.
To enable turn-by-turn navigation prompts, select Turn Prompts.
4If necessary, select Status to turn on the alert.
5If necessary, enter a distance or time value, and select .
Power Manager Settings
Hold UP, and select Power Manager.
Battery Saver: Turns off certain features to maximize battery life.
Battery Percentage: Displays remaining battery life as a percentage.
Battery Estimates: Displays remaining battery life as an estimated number of days or hours.
90 Customizing Your Watch
System Settings
Hold UP, and select System.
Language: Sets the language displayed on the watch.
Time: Adjusts the time settings (Time Settings, page91).
Display: Adjusts the screen settings (Changing the Screen Settings, page92).
Touch: Allows you to enable or disable the touchscreen during general use or activities.
Sound and Vibe: Sets the watch sounds, such as button tones, alerts, and vibrations.
Sleep Mode: Allows you to set your sleep hours and sleep mode preferences (Customizing Sleep Mode,
page39).
Do Not Disturb: Allows you to enable the Do Not Disturb mode. You can edit your preferences for the screen,
notifications, alerts, and wrist gestures.
Hot Keys: Allows you to assign shortcuts to buttons (Customizing the Hot Keys, page92).
Auto Lock: Allows you to lock the buttons and touchscreen automatically to prevent accidental button presses
and touchscreen swipes. Use the During Activity option to lock the buttons and touchscreen during a timed
activity. Use the Not During Activity option to lock the buttons and touchscreen when you are not recording a
timed activity.
Format: Sets general format preferences, such as the units of measure, pace and speed shown during activities,
the start of the week, and geographical position format and datum options (Changing the Units of Measure,
page92).
Performance Condition: Enables the performance condition feature during an activity (Performance Condition,
page24).
Data Recording: Sets how the watch records activity data. The Smart recording option (default) allows for
longer activity recordings. The Every Second recording option provides more detailed activity recordings, but
may not record entire activities that last for longer periods of time.
USB Mode: Sets the watch to use mass storage mode or Garmin mode when connected to a computer.
Reset: Allows you to reset user data and settings (Resetting All Default Settings, page99).
Software Update: Allows you to install downloaded software updates, enable automatic updates, or manually
check for updates (Product Updates, page97).
About: Displays device, software, license, and regulatory information.
Time Settings
Hold UP, and select System > Time.
Time Format: Sets the device to show time in a 12-hour, 24-hour, or military format.
Set Time: Sets the time zone for the watch. The Auto option sets the time zone automatically based on your
GPS position.
Time: Allows you to adjust the time if it is set to the Manual option.
Alerts: Allows you to set hourly alerts, as well as sunrise and sunset alerts that sound a specific number of
minutes or hours before the actual sunrise or sunset occurs (Setting Time Alerts, page91).
Sync With GPS: Allows you to manually sync the time when you change time zones, and to update for daylight
saving time (Syncing the Time with GPS, page83).
Setting Time Alerts
1Hold UP.
2Select System > Time > Alerts.
3Select an option:
To set an alert to sound a specific number of minutes or hours before the actual sunset occurs, select Til
Sunset > Status > On, select Time, and enter the time.
To set an alert to sound a specific number of minutes or hours before the actual sunrise occurs, select Til
Sunrise > Status > On, select Time, and enter the time.
To set an alert to sound every hour, select Hourly > On.
Customizing Your Watch 91
Changing the Screen Settings
1Hold UP.
2Select System > Display.
3Select an option:
Select During Activity.
Select General Use.
Select During Sleep.
NOTE: Always On Display and Gesture are not available during sleep.
4Select an option:
Select Always On Display to keep the watch face data visible and turn down the brightness. This option
impacts the battery and display life (About the AMOLED Display, page93).
Select Brightness to set the brightness level of the screen.
Select Gesture to turn on the screen by raising and turning your arm to look at your wrist.
Select Timeout to set the length of time before the screen turns off.
Customizing the Hot Keys
You can customize the hold function of individual buttons and combinations of buttons.
1Hold UP.
2Select System > Hot Keys.
3Select a button or combination of buttons to customize.
4Select a function.
Changing the Units of Measure
You can customize units of measure for distance, pace and speed, elevation, and more.
1Hold UP.
2Select System > Format > Units.
3Select a measurement type.
4Select a unit of measure.
Device Information
Viewing Device Information
You can view device information, such as the unit ID, software version, regulatory information, and license
agreement.
1Hold UP.
2Select System > About.
Viewing E-label Regulatory and Compliance Information
The label for this device is provided electronically. The e-label may provide regulatory information, such as
identification numbers provided by the FCC or regional compliance markings, as well as applicable product and
licensing information.
1Hold UP.
2From the system menu, select About.
92 Device Information
About the AMOLED Display
By default, the watch settings are optimized for battery life and performance (Maximizing Battery Life,
page99).
Image persistence, or pixel "burn-in," is normal behavior for AMOLED devices. To extend the display life, you
should avoid displaying static images at high brightness levels for long time periods. To minimize burn-in, the
Forerunner display turns off after the selected timeout (Changing the Screen Settings, page92). You can turn
your wrist toward your body, tap the touchscreen, or press a button to wake the watch.
Charging the Watch
WARNING
This device contains a lithium-ion battery. See the Important Safety and Product Information guide in the product
box for product warnings and other important information.
NOTICE
To prevent corrosion, thoroughly clean and dry the contacts and the surrounding area before charging or
connecting to a computer. Refer to the cleaning instructions (Device Care, page94).
1Plug the cable ( end) into the charging port on your watch.
2Plug the other end of the cable into a USB charging port.
The watch displays the current battery charge level.
Tips for Charging the Watch
1Connect the charger securely to the watch to charge it using the USB cable (Charging the Watch, page93).
You can charge the watch by plugging the USB cable into a Garmin approved AC adapter with a standard
wall outlet or a USB port on your computer. Charging a fully depleted battery takes up to two hours.
2Remove the charger from the watch after the battery charge level reaches 100%.
Device Information 93
Wearing the Watch
CAUTION
Some users may experience skin irritation after prolonged use of the watch, especially if the user has sensitive
skin or allergies. If you notice any skin irritation, remove the watch and give your skin time to heal. To help
prevent skin irritation, ensure the watch is clean and dry, and do not overtighten the watch on your wrist. For
more information, go to garmin.com/fitandcare.
Wear the watch above your wrist bone.
NOTE: The watch should be snug but comfortable. For more accurate heart rate readings, the watch should
not shift while running or exercising. For pulse oximeter readings, you should remain motionless.
NOTE: The optical sensor is located on the back of the watch.
See Tips for Erratic Heart Rate Data, page53 for more information about wrist-based heart rate.
See Tips for Erratic Pulse Oximeter Data, page55 for more information about the pulse oximeter sensor.
For more information about accuracy, go to garmin.com/ataccuracy.
For more information about watch wear and care, go to www.garmin.com/fitandcare.
Device Care
NOTICE
Avoid extreme shock and harsh treatment, because it can degrade the life of the product.
Avoid pressing the buttons under water.
Do not use a sharp object to clean the device.
Never use a hard or sharp object to operate the touchscreen, or damage may result.
Avoid chemical cleaners, solvents, and insect repellents that can damage plastic components and finishes.
Thoroughly rinse the device with fresh water after exposure to chlorine, salt water, sunscreen, cosmetics,
alcohol, or other harsh chemicals. Prolonged exposure to these substances can damage the case.
Do not store the device where prolonged exposure to extreme temperatures can occur, because it can cause
permanent damage.
94 Device Information
Cleaning the Watch
CAUTION
Some users may experience skin irritation after prolonged use of the watch, especially if the user has sensitive
skin or allergies. If you notice any skin irritation, remove the watch and give your skin time to heal. To help
prevent skin irritation, ensure the watch is clean and dry, and do not overtighten the watch on your wrist.
NOTICE
Even small amounts of sweat or moisture can cause corrosion of the electrical contacts when connected to a
charger. Corrosion can prevent charging and data transfer.
TIP: For more information, go to www.garmin.com/fitandcare.
1Rinse with water, or use a damp lint-free cloth.
2Allow the watch to dry completely.
Changing the Bands
The watch is compatible with standard quick-release bands. Forerunner 265S has 18mm wide bands, and
Forerunner 265 has 22 mm wide bands.
1Slide the quick-release pin on the spring bar to remove the band.
2Insert one side of the spring bar for the new band into the watch.
3Slide the quick-release pin, and align the spring bar with the opposite side of the watch.
4Repeat steps 1 through 3 to change the other band.
Device Information 95
Specifications
Battery type Rechargeable, built-in lithium-ion battery
Water rating Swim, 5ATM1
Media storage Up to 8GB
Operating temperature range From -20º to 50ºC (from -4º to 122ºF)
Charging temperature range From 0º to 45ºC (from 32º to 113ºF)
Forerunner 265 radio frequency/protocol 2.4GHz @ 18.9 dBm maximum
Forerunner 265S radio frequency/protocol 2.4GHz @ 17.6 dBm maximum
EU SAR, Forerunner 265 1.27 W/kg torso, 0.91 W/kg limb
EU SAR, Forerunner 265S 1.59 W/kg torso, 0.85 W/kg limb
Battery Life Information
The actual battery life depends on the features enabled on your watch, such as activity tracking, wrist-based
heart rate, phone notifications, GPS, and connected sensors.
Mode Forerunner 265S Battery
Life
Forerunner 265 Battery
Life
Activity mode with GPS Only mode and wrist-based
heart rate Up to 24 hr. Up to 20 hr.
Activity mode with Auto Select GPS mode and wrist-
based heart rate Up to 18 hr. Up to 16 hr.
Activity mode with All + Multi-Band GPS mode and
wrist-based heart rate Up to 15 hr. Up to 14 hr.
Activity mode with GPS Only mode, wrist-based heart
rate, and music playback Up to 7.5 hr. Up to 7 hr.
Activity mode with Auto Select GPS mode, wrist-
based heart rate, and music playback Up to 7 hr. Up to 6.5 hr.
Activity mode with All + Multi-Band GPS mode, wrist-
based heart rate, and music playback Up to 6 hr. Up to 6 hr.
Smartwatch mode with activity tracking, phone notifi
cations, and wrist-based heart rate Up to 15 days Up to 13 days
1 The device withstands pressure equivalent to a depth of 50m. For more information, go to www.garmin.com/waterrating.
96 Device Information
Troubleshooting
Product Updates
Your device automatically checks for updates when connected to Bluetooth or Wi‑Fi. You can manually check
for updates from the system settings (System Settings, page91). On your computer, install Garmin Express
(www.garmin.com/express). On your phone, install the Garmin Connect app.
This provides easy access to these services for Garmin devices:
Software updates
Map updates
Data uploads to Garmin Connect
Product registration
Setting Up Garmin Express
1Connect the device to your computer using a USBcable.
2Go to www.garmin.com/express.
3Follow the on-screen instructions.
Getting More Information
Go to support.garmin.com for additional manuals, articles, and software updates.
Go to buy.garmin.com, or contact your Garmin dealer for information about optional accessories and
replacement parts.
Go to www.garmin.com/ataccuracy.
This is not a medical device. The pulse oximeter feature is not available in all countries.
Activity Tracking
For more information about activity tracking accuracy, go to garmin.com/ataccuracy.
My daily step count does not appear
The daily step count is reset every night at midnight.
If dashes appear instead of your step count, allow the device to acquire satellite signals and set the time
automatically.
My step count does not seem accurate
If your step count does not seem accurate, you can try these tips.
Wear the watch on your non-dominant wrist.
Carry the watch in your pocket when pushing a stroller or lawn mower.
Carry the watch in your pocket when actively using your hands or arms only.
NOTE: The watch may interpret some repetitive motions, such as washing dishes, folding laundry, or clapping
your hands, as steps.
Troubleshooting 97
The step counts on my watch and my Garmin Connect account don't match
The step count on your Garmin Connect account updates when you sync your watch.
1Select an option:
Sync your step count with the Garmin Express application (Using Garmin Connect on Your Computer,
page78).
Sync your step count with the Garmin Connect app (Manually Syncing Data with Garmin Connect, page78).
2Wait while your data syncs.
Syncing can take several minutes.
NOTE: Refreshing the Garmin Connect app or the Garmin Express application does not sync your data or
update your step count.
The floors climbed amount does not seem accurate
Your watch uses an internal barometer to measure elevation changes as you climb floors. A floor climbed is
equal to 3m (10ft.).
Avoid holding handrails or skipping steps while climbing stairs.
In windy environments, cover the watch with your sleeve or jacket as strong gusts can cause erratic readings.
My intensity minutes are flashing
When you exercise at an intensity level that qualifies toward your intensity minutes goal, the intensity minutes
flash.
Acquiring Satellite Signals
The device may need a clear view of the sky to acquire satellite signals. The time and date are set automatically
based on the GPS position.
TIP: For more information about GPS, go to www.garmin.com/aboutGPS.
1Go outdoors to an open area.
The front of the device should be oriented toward the sky.
2Wait while the device locates satellites.
It may take 30–60 seconds to locate satellite signals.
Improving GPS Satellite Reception
Frequently sync the device to your Garmin account:
Connect your device to a computer using the USB cable and the Garmin Express application.
Sync your device to the Garmin Connect app using your Bluetooth enabled phone.
Connect your device to your Garmin account using a Wi‑Fi wireless network.
While connected to your Garmin account, the device downloads several days of satellite data, allowing it to
quickly locate satellite signals.
Take your device outside to an open area away from tall buildings and trees.
Remain stationary for a few minutes.
Restarting the Watch
If the watch stops responding, you may need to restart it.
NOTE: Restarting the watch may erase your data or settings.
1Hold LIGHT for 15 seconds.
The watch turns off.
2Hold LIGHT for one second to turn on the watch.
98 Troubleshooting
Resetting All Default Settings
Before you reset all default settings, you should sync the watch with the Garmin Connect app to upload your
activity data.
You can reset all of the watch settings to the factory default values.
1From the watch face, hold UP.
2Select System > Reset.
3Select an option:
To reset all of the watch settings to the factory default values and save all user-entered information and
activity history, select Reset Default Settings.
To delete all activities from the history, select Delete All Activities.
To reset all distance and time totals, select Reset Totals.
To reset all of the watch settings to the factory default values and delete all user-entered information and
activity history, select Delete Data and Reset Settings.
NOTE: If you have set up a GarminPay wallet, this option deletes the wallet from your watch. If you have
music stored on your watch, this option deletes your stored music.
Maximizing Battery Life
You can do several things to extend the life of the battery.
Turn off music.
Reduce the display brightness, and disable the Always On Display screen setting (Changing the Screen
Settings, page92).
Set up the battery saver preferences in the power manager (Power Manager Settings, page90).
Turn off Bluetooth technology when you are not using connected features (Phone Connectivity Features,
page74).
Reduce the display timeout (Changing the Screen Settings, page92).
Stop broadcasting heart rate data to paired Garmin devices (Broadcasting Heart Rate Data, page54).
Turn off wrist-based heart rate monitoring (Turning Off the Wrist-based Heart Rate Monitor, page53).
NOTE: Wrist-based heart rate monitoring is used to calculate vigorous intensity minutes and calories burned.
Limit the phone notifications the watch displays (Managing Notifications, page75).
Turn off the pulse oximeter feature (Turning Off the Wrist-based Heart Rate Monitor, page53).
When pausing your activity for a longer period of time, use the Resume Later option (Stopping an Activity,
page4).
Select the Smart recording interval (System Settings, page91).
Use UltraTrac GPS mode for your activity (GPS Settings, page88).
Use a watch face that is not updated every second.
For example, use a watch face without a second hand (Customizing the Watch Face, page14).
My Device is in the Wrong Language
1Hold UP.
2Scroll down to the last item in the list, and select it.
3Select the first item in the list.
4Use UP and DOWN to select your language.
Is my phone compatible with my watch?
The Forerunner watch is compatible with phones using Bluetooth technology.
Go to www.garmin.com/ble for Bluetooth compatibility information.
Troubleshooting 99
My phone will not connect to the watch
If your phone will not connect to the watch, you can try these tips.
Turn off your phone and your watch, and turn them back on again.
Enable Bluetooth technology on your phone.
Update the Garmin Connect app to the latest version.
Remove your watch from the Garmin Connect app and the Bluetooth settings on your phone to retry the
pairing process.
If you bought a new phone, remove your watch from the Garmin Connect app on the phone you intend to stop
using.
Bring your phone within 10m (33ft.) of the watch.
On your phone, open the Garmin Connect app, select or , and select Garmin Devices > Add Device to
enter pairing mode.
From the watch face, hold UP, and select Connectivity > Phone > Pair Phone.
The temperature reading is not accurate
Your body temperature affects the temperature reading for the internal temperature sensor. To get the most
accurate temperature reading, you should remove the watch from your wrist and wait 20 to 30 minutes.
You can also use an optional tempe external temperature sensor to view accurate ambient temperature
readings while wearing the watch.
How can I manually pair sensors?
The first time you connect a wireless sensor to your watch using ANT+ or Bluetooth technology, you must pair
the watch and sensor. If the sensor has both ANT+ and Bluetooth technology, Garmin recommends that you
pair using ANT+ technology. After they are paired, the watch connects to the sensor automatically when you
start an activity and the sensor is active and within range.
1Bring the watch within 3m (10ft.) of the sensor.
NOTE: Stay 10m (33ft.) away from other wireless sensors while pairing.
2If you are pairing a heart rate monitor, put on the heart rate monitor.
The heart rate monitor does not send or receive data until you put it on.
3Hold UP.
4Select Sensors & Accessories > Add New.
5Select an option:
Select Search All.
Select your sensor type.
After the sensor is paired with your watch, the sensor status changes from Searching to Connected. Sensor
data appears in the data screen loop or a custom data field.
Can I use my Bluetooth sensor with my watch?
The watch is compatible with some Bluetooth sensors. The first time you connect a sensor to your Garmin
watch, you must pair the watch and sensor. After they are paired, the watch connects to the sensor
automatically when you start an activity and the sensor is active and within range.
1Hold UP.
2Select Sensors & Accessories > Add New.
3Select an option:
Select Search All.
Select your sensor type.
You can customize the optional data fields (Customizing the Data Screens, page85).
100 Troubleshooting
My headphones will not connect to the watch
If your Bluetooth headphones were previously connected to your phone, they may connect to your phone
automatically instead of connecting to your watch. You can try these tips.
Turn off Bluetooth technology on your phone.
Refer to the owner's manual for your phone for more information.
Stay 10m (33ft.) away from your phone while connecting your headphones to your watch.
Pair your headphones with your watch (Connecting Bluetooth Headphones, page72).
My music cuts out or my headphones won't stay connected
When using a Forerunner music watch connected to Bluetooth headphones, the signal is strongest when there
is a direct line of sight between the watch and the antenna on the headphones.
If the signal passes through your body, you may experience signal loss or your headphones may become
disconnected.
If you wear your Forerunner music watch on your left wrist, you should make sure the headphone's Bluetooth
antenna is on your left ear.
Since headphones vary by model, you can try wearing the watch on your other wrist.
If you are using metal or leather watch bands, you can switch to silicone watch bands to improve signal
strength.
Troubleshooting 101
Appendix
Data Fields
NOTE: Not all data fields are available for all activity types. Some data fields require compatible accessories to
display data. Some data fields appear in more than one category on the watch.
TIP: You can also customize the data fields from the watch settings in the Garmin Connect app.
Cadence Fields
Name Description
Average Cadence Cycling. The average cadence for the current activity.
Average Cadence Running. The average cadence for the current activity.
Cadence Cycling. The number of revolutions of the crank arm. Your device must be connected to a
cadence accessory for this data to appear.
Cadence Running. The steps per minute (right and left).
Lap Cadence Cycling. The average cadence for the current lap.
Lap Cadence Running. The average cadence for the current lap.
Last Lap Cadence Cycling. The average cadence for the last completed lap.
Last Lap Cadence Running. The average cadence for the last completed lap.
Charts
Name Description
Barometer Chart A chart showing the barometric pressure over time.
Elevation Chart A chart showing the elevation over time.
Heart Rate Chart A chart showing your heart rate throughout the activity.
Pace Chart A chart showing your pace throughout the activity.
Power Chart A chart showing your power throughout the activity.
Speed Chart A chart showing your speed throughout the activity.
Compass Fields
Name Description
Compass Heading The direction you are moving based on the compass.
GPS Heading The direction you are moving based on GPS.
Heading The direction you are moving.
102 Appendix
Distance Fields
Name Description
Distance The distance traveled for the current track or activity.
Interval Distance The distance traveled for the current interval.
Lap Distance The distance traveled for the current lap.
Last Lap Distance The distance traveled for the last completed lap.
Nautical Distance The distance traveled in nautical meters or nautical feet.
Elevation Fields
Name Description
Average Ascent The average vertical distance of ascent since the last reset.
Average Descent The average vertical distance of descent since the last reset.
Elevation The altitude of your current location above or below sea level.
Glide Ratio The ratio of horizontal distance traveled to the change in vertical distance.
GPS Elevation The altitude of your current location using GPS.
Grade The calculation of rise (elevation) over run (distance). For example, if for every 3m
(10ft.) you climb you travel 60m (200ft.), the grade is 5%.
Lap Ascent The vertical distance of ascent for the current lap.
Lap Descent The vertical distance of descent for the current lap.
Last Lap Ascent The vertical distance of ascent for the last completed lap.
Last Lap Descent The vertical distance of descent for the last completed lap.
Maximum Ascent The maximum rate of ascent in feet per minute or meters per minute since the last reset.
Maximum Descent The maximum rate of descent in meters per minute or feet per minute since the last
reset.
Maximum Elevation The highest elevation reached since the last reset.
Minimum Elevation The lowest elevation reached since the last reset.
Total Ascent The total elevation distance ascended since the last reset.
Total Descent The total elevation distance descended since the last reset.
Floors Fields
Name Description
Floors Climbed The total number of floors climbed up for the day.
Floors Descended The total number of floors climbed down for the day.
Floors per Minute The number of floors climbed up per minute.
Appendix 103
Graphical
Name Description
Cadence Gauge Running. A color gauge showing your current cadence range.
Compass Gauge The direction you are moving based on the compass.
GCT Balance Gauge A color gauge showing the left/right balance of ground contact time while
running.
Ground Contact Time
Gauge
A color gauge showing the amount of time in each step that you spend on the
ground while running, measured in milliseconds.
Heart Rate Gauge A color gauge showing your current heart rate zone.
PacePro Gauge Running. Your current split pace and your target split pace.
Power Gauge A color gauge showing your current power zone.
Total Ascent/Descent
Gauge
The total elevation distances ascended and descended during the activity or
since the last reset.
Training Effect Gauge The impact of the current activity on your aerobic and anaerobic fitness levels.
Vertical Oscillation Gauge A color gauge showing the amount of bounce while you are running.
Vertical Ratio Gauge A color gauge showing the ratio of vertical oscillation to stride length.
Heart Rate Fields
Name Description
% Heart Rate Reserve The percentage of heart rate reserve (maximum heart rate minus resting heart
rate).
Aerobic Training Effect The impact of the current activity on your aerobic fitness level.
Anaerobic Training Effect The impact of the current activity on your anaerobic fitness level.
Average % Heart Rate
Reserve
The average percentage of heart rate reserve (maximum heart rate minus
resting heart rate) for the current activity.
Average Heart Rate The average heart rate for the current activity.
Average Heart Rate %Max. The average percentage of maximum heart rate for the current activity.
Heart Rate Your heart rate in beats per minute (bpm). Your device must have wrist-based
heart rate or be connected to a compatible heart rate monitor.
Heart Rate %Max. The percentage of maximum heart rate.
Heart Rate Zone The current range of your heart rate (1 to 5). The default zones are based on
your user profile and maximum heart rate (220 minus your age).
Interval Average %HRR The average percentage of heart rate reserve (maximum heart rate minus
resting heart rate) for the current swim interval.
Interval Average %Max. The average percentage of maximum heart rate for the current swim interval.
Interval Average Heart Rate The average heart rate for the current swim interval.
Interval Maximum %HRR The maximum percentage of heart rate reserve (maximum heart rate minus
resting heart rate) for the current swim interval.
104 Appendix
Name Description
Interval Maximum %Max. The maximum percentage of maximum heart rate for the current swim interval.
Interval Maximum Heart
Rate The maximum heart rate for the current swim interval.
Lap % Heart Rate Reserve The average percentage of heart rate reserve (maximum heart rate minus
resting heart rate) for the current lap.
Lap Heart Rate The average heart rate for the current lap.
Lap Heart Rate %Max. The average percentage of maximum heart rate for the current lap.
Last Lap %HRR The average percentage of heart rate reserve (maximum heart rate minus
resting heart rate) for the last completed lap.
Last Lap Heart Rate The average heart rate for the last completed lap.
Last Lap Heart Rate %Max. The average percentage of maximum heart rate for the last completed lap.
Time in Zone The time elapsed in each heart rate zone.
Lengths Fields
Name Description
Interval Lengths The number of pool lengths completed during the current interval.
Lengths The number of pool lengths completed during the current activity.
Appendix 105
Other Fields
Name Description
Active Calories The calories burned during the activity.
Ambient Pressure The uncalibrated environmental pressure.
Barometric Pressure The current calibrated environmental pressure.
Battery Level The remaining battery power.
eBike Battery The remaining battery power of an ebike.
eBike Range The estimated remaining distance the ebike can provide assistance.
GPS The strength of the GPS satellite signal.
Laps The number of laps completed for the current activity.
Load
The training load for the current activity. Training load is the amount of excess post-
exercise oxygen consumption (EPOC), which indicates the strenuousness of your
workout.
Performance Condition The performance condition score is a real-time assessment of your ability to perform.
Reps During a strength training activity, the number of repetitions in a workout set.
Respiration Rate Your respiration rate in breaths per minute (brpm).
Runs The number of runs for the activity.
Steps The number of steps taken during the current activity.
Stress Your current stress level.
Sunrise The time of sunrise based on your GPS position.
Sunset The time of sunset based on your GPS position.
Time of Day The time of day based on your current location and time settings (format, time zone,
daylight saving time).
Time of Day (Seconds) The time of day including seconds.
Total Calories The amount of total calories burned for the day.
106 Appendix
Pace Fields
Name Description
500m Pace The current rowing pace per 500 meters.
Average 500m Pace The average rowing pace per 500meters for the current activity.
Average Pace The average pace for the current activity.
Grade Adjusted Pace The average pace adjusted by the steepness of the terrain.
Interval Pace The average pace for the current interval.
Lap 500m Pace The average rowing pace per 500meters for the current lap.
Lap Pace The average pace for the current lap.
Last Lap 500m Pace The average rowing pace per 500meters for the last lap.
Last Lap Pace The average pace for the last completed lap.
Last Length Pace The average pace for your last completed pool length.
Pace The current pace.
PacePro Fields
Name Description
Next Split Distance Running. The total distance of the next split.
Next Split Target Pace Running. The target pace for the next split.
Split Distance Running. The total distance of the current split.
Split Distance Remaining Running. The remaining distance of the current split.
Split Pace Running. The pace for the current split.
Split Target Pace Running. The target pace for the current split.
Power Fields
Name Description
3s Power The 3-second moving average of power output.
30s Power The 30-second moving average of power output.
Average Power The average power output for the current activity.
Lap Power The average power output for the current lap.
Last Lap Power The average power output for the last completed lap.
Maximum Power The top power output for the current activity.
Power The current power output in watts.
Power Zone The current range of power output based on your FTP or custom settings.
Work The accumulated work performed (power output) in kilojoules.
Appendix 107
Rest Fields
Name Description
Repeat On The timer for the last interval plus the current rest (pool swimming).
Rest Timer The timer for the current rest (pool swimming).
Run Dynamics
Name Description
Average GCT Balance The average ground contact time balance for the current session.
Average Ground Contact
Time The average amount of ground contact time for the current activity.
Average Stride Length The average stride length for the current session.
Average Vertical Oscilla
tion The average amount of vertical oscillation for the current activity.
Average Vertical Ratio The average ratio of vertical oscillation to stride length for the current session.
GCT Balance The left/right balance of ground contact time while running.
Ground Contact Time The amount of time in each step that you spend on the ground while running,
measured in milliseconds. Ground contact time is not calculated while walking.
Lap GCT Balance The average ground contact time balance for the current lap.
Lap Ground Contact Time The average amount of ground contact time for the current lap.
Lap Stride Length The average stride length for the current lap.
Lap Vertical Oscillation The average amount of vertical oscillation for the current lap.
Lap Vertical Ratio The average ratio of vertical oscillation to stride length for the current lap.
Stride Length The length of your stride from one footfall to the next, measured in meters.
Vertical Oscillation The amount of bounce while you are running. The vertical motion of your torso,
measured in centimeters for each step.
Vertical Ratio The ratio of vertical oscillation to stride length.
108 Appendix
Speed Fields
Name Description
Average Moving Speed The average speed when moving for the current activity.
Average Overall Speed The average speed for the current activity, including both moving and stopped
speeds.
Average Speed The average speed for the current activity.
Average Nautical Speed The average speed in knots for the current activity.
Lap Speed The average speed for the current lap.
Last Lap Speed The average speed for the last completed lap.
Maximum Speed The top speed for the current activity.
Maximum Nautical Speed The maximum speed in knots for the current activity.
Nautical Speed The current speed in knots.
Speed The current rate of travel.
Speed Chart A chart showing your current speed.
Vertical Speed The rate of ascent or descent over time.
Stroke Fields
Name Description
Average Distance Per Stroke Swimming. The average distance traveled per stroke during the current activity.
Average Distance Per Stroke Paddle sports. The average distance traveled per stroke during the current
activity.
Average Stroke Rate The average number of strokes per minute (spm) during the current activity.
Average Strokes Per Length The average number of strokes per pool length during the current activity.
Distance Per Stroke Paddle sports. The distance traveled per stroke.
Interval Stroke Rate The average number of strokes per minute (spm) during the current interval.
Interval Strokes Per Length The average number of strokes per pool length during the current interval.
Interval Stroke Type The current stroke type for the interval.
Lap Distance Per Stroke Swimming. The average distance traveled per stroke during the current lap.
Lap Distance Per Stroke Paddle sports. The average distance traveled per stroke during the current lap.
Lap Stroke Rate Swimming. The average number of strokes per minute (spm) during the current
lap.
Lap Stroke Rate Paddle sports. The average number of strokes per minute (spm) during the
current lap.
Lap Strokes Swimming. The total number of strokes for the current lap.
Lap Strokes Paddle sports. The total number of strokes for the current lap.
Appendix 109
Name Description
Last Lap Distance Per Stroke Swimming. The average distance traveled per stroke during the last completed
lap.
Last Lap Distance Per Stroke Paddle sports. The average distance traveled per stroke during the last
completed lap.
Last Lap Stroke Rate Swimming. The average number of strokes per minute (spm) during the last
completed lap.
Last Lap Stroke Rate Paddle sports. The average number of strokes per minute (spm) during the last
completed lap.
Last Lap Strokes Swimming. The total number of strokes for the last completed lap.
Last Lap Strokes Paddle sports. The total number of strokes for the last completed lap.
Last Length Stroke Rate The average number strokes per minute (spm) during the last completed pool
length.
Last Length Strokes The total number of strokes for the last completed pool length.
Last Length Stroke Type The stroke type used during the last completed pool length.
Stroke Rate Swimming. The number of strokes per minute (spm).
Stroke Rate Paddle sports. The number of strokes per minute (spm).
Strokes Swimming. The total number of strokes for the current activity.
Strokes Paddle sports. The total number of strokes for the current activity.
Swolf Fields
Name Description
Average Swolf
The average swolf score for the current activity. Your swolf score is the sum of the time for
one length plus the number of strokes for that length (Swim Terminology, page9). In open
water swimming, 25 meters is used to calculate your swolf score.
Interval Swolf The average swolf score for the current interval.
Lap Swolf The swolf score for the current lap.
Last Lap Swolf The swolf score for the last completed lap.
Last Length Swolf The swolf score for the last completed pool length.
Temperature Fields
Name Description
24-Hour Maximum The maximum temperature recorded in the last 24hours from a compatible temperature
sensor.
24-Hour Minimum The minimum temperature recorded in the last 24hours from a compatible temperature
sensor.
Temperature
The temperature of the air. Your body temperature affects the temperature sensor. You
can pair a tempe sensor with your device to provide a consistent source of accurate
temperature data.
110 Appendix
Timer Fields
Name Description
Average Lap Time The average lap time for the current activity.
Elapsed Time
The total time recorded. For example, if you start the activity timer and run for 10
minutes, then stop the timer for 5 minutes, then start the timer and run for 20 minutes,
your elapsed time is 35 minutes.
Interval Time The stopwatch time for the current interval.
Lap Time The stopwatch time for the current lap.
Last Lap Time The stopwatch time for the last completed lap.
Moving Time The total time moving for the current activity.
Multisport Time The total time for all sports in a multisport activity, including transitions.
Overall Ahead/Behind The overall time ahead or behind of the target pace.
Set Timer During a strength training activity, the amount of time spent in the current workout set.
Stopped Time The total time stopped for the current activity.
Swim Time The swimming time for the current activity, not including rest time.
Timer The current time of the countdown timer.
Workout Fields
Name Description
Reps to Go During a workout, the remaining repetitions.
Step Duration The time or distance remaining for the workout step.
Step Pace The current pace during the workout step.
Step Speed The current speed during the workout step.
Step Time The time elapsed for the workout step.
Appendix 111
VO2 Max. Standard Ratings
These tables include standardized classifications for VO2 max. estimates by age and sex.
Males Percentile 20–29 30–39 40–49 50–59 60–69 70–79
Superior 95 55.4 54 52.5 48.9 45.7 42.1
Excellent 80 51.1 48.3 46.4 43.4 39.5 36.7
Good 60 45.4 44 42.4 39.2 35.5 32.3
Fair 40 41.7 40.5 38.5 35.6 32.3 29.4
Poor 0–40 <41.7 <40.5 <38.5 <35.6 <32.3 <29.4
Females Percentile 20–29 30–39 40–49 50–59 60–69 70–79
Superior 95 49.6 47.4 45.3 41.1 37.8 36.7
Excellent 80 43.9 42.4 39.7 36.7 33 30.9
Good 60 39.5 37.8 36.3 33 30 28.1
Fair 40 36.1 34.4 33 30.1 27.5 25.9
Poor 0–40 <36.1 <34.4 <33 <30.1 <27.5 <25.9
Data reprinted with permission from The Cooper Institute. For more information, go to www.CooperInstitute.org.
FTP Ratings
These tables include classifications for functional threshold power (FTP) estimates by sex.
Males Watts per Kilogram (W/kg)
Superior 5.05 and greater
Excellent From 3.93 to 5.04
Good From 2.79 to 3.92
Fair From 2.23 to 2.78
Untrained Less than 2.23
Females Watts per Kilogram (W/kg)
Superior 4.30 and greater
Excellent From 3.33 to 4.29
Good From 2.36 to 3.32
Fair From 1.90 to 2.35
Untrained Less than 1.90
FTP ratings are based on research by Hunter Allen and Andrew Coggan, PhD, Training and Racing with a Power
Meter (Boulder, CO: VeloPress, 2010).
112 Appendix
Wheel Size and Circumference
Your speed sensor automatically detects your wheel size. If necessary, you can manually enter your wheel
circumference in the speed sensor settings.
The tire size is marked on both sides of the tire. You can measure the circumference of your wheel or use one of
the calculators available on the internet.
Appendix 113
support.garmin.com
GUID-F41EAFB3-6CC9-42DE-9C6C-9E358DBB0671 v2June 2023
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Garmin Forerunner 265 serie wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Garmin Forerunner 265 serie

Garmin Forerunner 265 serie Bedienungsanleitung - Deutsch - 132 seiten

Garmin Forerunner 265 serie Bedienungsanleitung - Holländisch - 128 seiten

Garmin Forerunner 265 serie Bedienungsanleitung - Französisch - 132 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info