Bedienungsanleitung Garmin FUSION MS-AV750 (Seite 7 von 16) (Englisch)

801435

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

2Select an option:

• Turn the dial to highlight a source.

• Select repeatedly to highlight a source.

3Press the dial to select the source.

Adjusting the Volume

1Use the dial to adjust the volume.

2If necessary, press the dial to switch between zones.

TIP: To control all zones at the same time, press the dial until

all zones are highlighted.

Adjusting the Tones

1Select > Settings > Tone.

2Use the dial to adjust the level.

3Press the dial to switch to a different tone.

Speaker Zones

You can group speakers in one area into speaker zones. You

can then control the audio level of the zones individually. For

example, you might want the audio quieter in the cabin and

louder on deck.

Zones 1 and 2 are powered by the on-board, Class D amplifier.

To use the four line outputs and the four subwoofer outputs, you

must connect external amplifiers.

You can set the balance, volume limit, subwoofer level, and

name for each of the available zones. Up to two pairs of

speakers can be connected per zone in parallel to increase the

amplifier output.

Setting up Speaker Zones

1Select > Settings > Zone.

2Select a zone.

3Select one or more options:

NOTE: Not all options are available for all zones.

• To disable the zone and remove it from the audio level

pages, select Enabled to clear the check box. When a

zone is disabled, you cannot change any of the settings

for that zone.

• To link zones 1 and 2, select Link to Zone 1 to fill the

check box.

• To adjust the right and left speaker balance of this zone,

select Balance, and use the dial to set the balance.

• To limit the maximum volume output of this zone, select

Volume Limit, and use the dial to set the limit.

• To set the subwoofer level for this zone, select Sub Level,

and use the dial to set the level.

TIP: To open the subwoofer level from any screen, press

and hold the dial for three seconds.

• To give the zone a specific name, select Name (Entering

Text, page 1).

• To allow the volume of this zone to be controlled by

another amplifier or stereo and provide a fixed line level

output, select Volume Control to clear the check box.

Linking Zones

1Select > Settings > Zone > Zone 2.

2Select Link to Zone 1 to fill the button.

When zones 1 and 2 are linked, appears between zones 1

and 2 on the volume screen.

Disabling the Internal Amplifiers

When you use external amplifiers for zones 1 and 2, you can

disable the internal amplifiers to reduce power consumption.

1Select > Settings > Zone.

2Select Amps On to clear the check box.

Adjusting the Subwoofer Filter

You can use the subwoofer filter setting to control the subwoofer

cutoff frequency, which can enhance the blend of the sound

produced by the speakers and the subwoofer. Audio signals

above the selected frequency are not passed to the subwoofer.

The setting applies to all subwoofer outputs.

1Select > Settings > Zone > Subwoofer Filter.

2Select a frequency.

3Press the dial to save the selection.

Infrared Remote Control

You can use the infrared (IR) remote control to control the AV

stereo. The remote buttons function similarly to the device

buttons. The result of a button press varies based on the active

media source.

NOTE: The remote is included only with AV models.

Button Function

Turns the device on and off.

Cycles the available sources.

DSP Displays the CD track, DVD chapter, and title you are

watching or listening to on the connected TV.

ZOOM Zooms in on the DVD picture.

SUB-T Cycles through the available subtitle languages for the

DVD.

DVD Opens the DVD setup menu on the connected TV.

MNU • Opens the navigation menu.

• DVD source: Opens the menu in the connected TV.

Mutes and unmutes the audio.

Arrows Moves through the menus and settings.

SEL Selects the highlighted option or setting.

RPT Repeats the current selection.

RDM Plays tracks or chapters in a random order.

Tells Pandora you like this track and would like more

tracks similar to this played on this station.

Tells Pandora not to play this track.

• Pauses or resumes the current track, when using an

applicable source.

• Cycles through the tuning modes (auto, manual, and

presets), when using an applicable source.

Press once to stop the play.

Press twice to return to the beginning.

Skips to the previous channel, preset, or track, when

using an applicable source.

Skips back (rewinds) in the track or chapter.

Skips ahead (fast forward) in the track or chapter.

Skips to the next channel, preset, or track, when using

an applicable source.

Numeric

buttons

Allows you to enter numbers and numeric information,

such as specific track numbers.

Bluetooth Device Playback

You can pair the stereo to up to eight Bluetooth media devices.

You can control the playback using the keys, but you cannot

browse the music collection. You should select the song or

playlist on the media device.

The availability of song information such as song title, artist

name, and track duration depends on the capability of the media

player and music application. Album cover artwork and the

shuffle and repeat status icons are not supported over Bluetooth

wireless technology.

Bluetooth Device Playback 3

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin FUSION MS-AV750 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin FUSION MS-AV750

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info