Bedienungsanleitung Garmin Fusion MS-RA210 (Seite 10 von 32) (Englisch)

801407

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Configuring the DSP Settings

You must download and install the Fusion-Link remote control app on your compatible Apple® or Android™

device before you can configure the DSP settings (Fusion-Link Wireless Remote Control App, page23).

You can configure the DSP settings to optimize the sound on each zone with the installed speakers, amplifiers,

and environment.

1From the settings menu on your Apple or Android device, connect to the stereo using Bluetooth technology.

2Open the Fusion-Link remote control app on your compatible Apple or Android device.

3If necessary, select the stereo you want to configure.

4Select .

5If necessary, select the MUSIC tab.

6Select a zone.

7Select DSP SETTINGS.

8Configure the DSP settings as needed, depending on the models of Fusion speakers and amplifiers

connected to the zone.

9Repeat these steps for each zone.

10 After you have finished configuring the DSP settings for all zones, select an option:

• On an Apple device, select > SEND DSP SETTINGS

• On an Android device, select > Zone > SEND DSP SETTINGS.

Automatic Volume Adjustment Based on Speed

If your stereo is connected to a NMEA 2000® network with a device that provides speed information such as an

engine, chartplotter, GPS antenna, water speed sensor, or wind speed sensor, you can set the stereo to adjust

the volume automatically based on the selected speed source (Enabling Automatic Volume Adjustment Based

on Speed, page20).

For example, if a chartplotter with an internal GPS antenna or a stand-alone GPS antenna is on the same NMEA

2000 network as the stereo and you set the SPEED SOURCE to SPEED OVER GROUND, the volume increases as

your speed increases.

NOTE: When the volume increases to adjust for speed, the actual volume output changes, but the volume-level

indicator bar and number stays the same.

For more information about connecting the stereo to a NMEA 2000 network, see the installation instructions for

your stereo.

Media Player Connection

CAUTION

Always disconnect your media player from the stereo when not in use and do not leave it in your vessel. This

can help reduce the risk of theft and damage from extreme temperatures.

Do not remove the media player or use your stereo in a distracting manner while operating the vessel. Check

and obey all marine laws in association with use.

NOTICE

It is the user's responsibility to comply with all applicable laws and ordinances associated with the use of this

device. Garmin® is not responsible for any fines, penalties, or damages that you may incur for failing to abide by

any such laws and ordinances.

The stereo accepts a variety of media players, including smartphones and other mobile devices. You can

connect a compatible media player using a Bluetooth wireless connection or a USB connection to the USB port.

6 Media Player Connection

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Fusion MS-RA210 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Fusion MS-RA210

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info