Bedienungsanleitung Garmin GPS 158 (Seite 9 von 16) (Englisch)

658527

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

GPS 158 Owner’s Manual 9





See the Important Safety and Product Information beginning on page 13 for product

warnings and other important information�



Always wear safety goggles, ear protection, and a dust mask when drilling, cutting,

or sanding�



• Drill and drill bits

•

in� wrench or socket

• Masking tape

• Number 2 Phillips screwdriver

• Marine sealant

• Hardware for the swivel mount (bolts or screws)



Before permanently installing any part of the device, plan the installation by

determining the location of the various components� Verify that the cables are long

enough to connect the components to each other and to power�



The device is mounted using the included swivel mount� When planning a mounting

location, choose a location that you can see as you operate your vessel, provides

easy access to the keys on the device, and is the appropriate distance from a

compass�





Select a mounting location (page 9)�



Prepare the swivel-mount base (page 9)�



Fasten the mount with the cables installed in the mount (page 11), or without the

cables installed in the mount (page 10)�



For optimal performance, consider these guidelines when selecting the swivel-

mount location�

• The location provides a clear view of the screen and access to the keys on the

device�

• The location is sturdy enough to support the device and the mount�

• You can route the cables either from under the swivel mount, or from behind the

device�

• The location is the appropriate distance from a compass�





Use pan-head screws or bolts when securing the swivel-mount base� Screws or

bolts with countersunk heads will damage the base�



After you have chosen the location to install the swivel mount (page 9),

determine whether you will attach the mount to the surface using screws or

bolts, and choose the appropriate fastening hardware:

• To attach the base with screws, use self-tapping, pan-head wood screws,

either size #8 or a diameter of

in� (4 mm), with an appropriate drill bit for

the pilot hole�

• To attach the base with bolts, use pan-head bolts, either size #8 or a

diameter of

in� (4 mm), with the appropriate washers and nuts� Use a drill

bit of the same diameter as the bolt�

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPS 158 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPS 158

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info