Bedienungsanleitung Garmin GPS Map 65 (Seite 7 von 20) (Englisch)

740412

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Guidance Text: Customizes when guidance text is shown on

the map.

Text Size: Selects the text size for map items.

Detail: Selects the amount of detail shown on the map. Showing

more detail may cause the map to redraw more slowly.

Shaded Relief: Shows detail relief on the map (if available) or

turns off shading.

Compass

When navigating, points to your destination, regardless of the

direction you are moving. When points toward the top of the

electronic compass, you are traveling directly toward your

destination. If points any other direction, turn until it points

toward the top of the compass.

Calibrating the Compass

Before you can calibrate the electronic compass, you must be

outdoors, away from objects that influence magnetic fields, such

as cars, buildings, or overhead power lines.

The device has a 3-axis electronic compass (GPSMAP 65s

devices only). You should calibrate the compass after moving

long distances, experiencing temperature changes, or changing

the batteries.

From the compass, select MENU.

Select Calibrate Compass > Start.

Follow the on-screen instructions.

Using the Compass

You can use the compass to navigate an active route.

Select PAGE.

Hold the device level.

Follow to your destination.

Course Pointer

The course pointer is most useful when you are navigating on

water or where there are no major obstacles in your path. It can

also help you avoid hazards near the course, such as shoals or

submerged rocks.

To enable the course pointer, from the compass, select MENU >

Setup Heading > Go To Line/Pointer > Course (CDI).

The course pointer indicates your relationship to the course

line leading to the destination. The course deviation indicator

(CDI) provides the indication of drift (right or left) from the

course. The scale refers to the distance between dots on

the course deviation indicator, which tell you how far off course

you are.

Navigating with Sight 'N Go

You can point the device at an object in the distance, lock in the

direction, and navigate to the object.

NOTE: Sight 'N Go is available only with GPSMAP 65s devices.

Select Sight 'N Go.

Point the device at an object.

Select Lock Direction > Set Course.

Navigate using the compass.

Heading Settings

You can customize the compass settings.

Select Setup > Heading.

Display: Sets the type of directional heading shown on the

compass.

North Reference: Sets the north reference used on the

compass.

Go To Line/Pointer: Sets the behavior of the pointer that

appears on the map. Bearing points in the direction of your

destination. Course shows your relationship to the course line

leading to the destination.

Compass: Automatically switches from an electronic compass

to a GPS compass when you are traveling at a higher rate of

speed for a period of time.

Calibrate Compass: See Calibrating the Compass, page 3.

Trip Computer

The trip computer displays your current speed, average speed,

trip odometer, and other helpful statistics. You can customize

the trip computer layout, dashboard, and data fields.

Trip Computer Settings

From the trip computer, select MENU.

Reset: Resets all the trip computer values to zero. For accurate

information, reset the trip information before beginning a trip.

Big Numbers: Changes the size of the numbers shown on the

trip computer page.

Change Data Fields: Customizes the trip computer data fields.

Change Dashboard: Changes the theme and information

displayed on the dashboard.

NOTE: Your customized settings are remembered by the

dashboard. Your settings are not lost when you change

profiles (Profiles, page 10).

Restore Defaults: Restores the trip computer to factory default

settings.

Elevation Plot

NOTE: The elevation plot is available only with GPSMAP 65s

devices.

By default, the elevation plot displays the elevation over the

distance traveled. You can customize elevation plot settings

(Elevation Plot Settings, page 3). You can select any point on

the plot to view details about that point.

Elevation Plot Settings

From the elevation plot, select MENU.

Change Plot Type: Sets the type of data shown on the

elevation plot.

Elevation/Time: Records elevation changes over a period of

time.

Elevation/Distance: Records elevation changes over a

distance.

Barometric Pressure: Records barometric pressure changes

over a period of time.

Ambient Pressure: Records ambient pressure changes over a

period of time.

Adjust Zoom Ranges: Adjusts the zoom ranges shown on the

elevation plot page.

Change Data Fields: Customizes the elevation plot data fields.

Reset: Resets the elevation plot data, including waypoint, track,

and trip data.

Calibrate Altimeter: See Calibrating the Barometric Altimeter,

page 4.

Using the Main Pages 3

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPS Map 65 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPS Map 65

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info