Bedienungsanleitung Garmin GPS Map 65 (Seite 13 von 20) (Englisch)

740412

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

NOTE: This setting is disabled when the NiMH battery pack

is installed.

Satellite Settings

Select Setup > System > Satellite.

Satellite System: Sets the satellite system to GPS only,

multiple satellite systems, or Demo Mode (GPS off).

Multi-Band: Enables the use of multi-band systems on the

GPSMAP 65/65s device.

NOTE: Multi-band systems use multiple frequency bands and

allow for more consistent track logs and improved positioning

when using the device in challenging environments.

GPS and Other Satellite Systems

Using GPS and another satellite system together offers

increased performance in challenging environments and faster

position acquisition than using GPS only. However, using

multiple systems can reduce battery life more quickly than using

GPS only.

Your device can use these Global Navigation Satellite Systems

(GNSS). Multi-band systems use multiple frequency bands and

allow for more consistent track logs, improved positioning,

improved multi-path errors, and fewer atmospheric errors when

using the device in challenging environments.

NOTE: You can view satellite locations and available satellite

systems on the satellite page (Satellite Page, page 6).

GPS multi-band: A satellite constellation built by the United

States, using the enhanced L5 signal.

GLONASS: A satellite constellation built by Russia.

GALILEO multi-band: A satellite constellation built by the

European Space Agency, using the enhanced L5 signal.

QZSS multi-band: A satellite constellation built by Japan, using

the enhanced L5 signal.

Serial Interface Settings

Select Setup > System > Interface.

Garmin Spanner: Allows you to use the device USB port with

most NMEA 0183-compliant mapping programs by creating a

virtual serial port.

Garmin Serial: Sets the device to use a Garmin proprietary

format to exchange waypoint, route, and track data with a

computer.

NMEA In/Out: Sets the device to use standard NMEA 0183

output and input.

Text Out: Provides simple ASCII text output of location and

velocity information.

MTP: Sets the device to use Media Transfer Protocol (MTP) to

access the file system on the device instead of mass storage

mode.

Display Settings

Select Setup > Display.

Backlight Timeout: Adjusts the length of time before the

backlight turns off.

Battery Save: Saves the battery power and prolongs the battery

life by turning off the screen when the backlight times out.

Colors: Changes the appearance of the display background and

selection highlight.

Main, Setup, Find Style: Changes the style of the menu

system.

Screen Capture: Allows you to save the image on the device

screen.

Bluetooth Settings

Select Setup > Bluetooth.

Status: Enables Bluetooth wireless technology, and shows

current connection status.

Notifications: Shows or hides smartphone notifications.

Forget Phone: Removes the connected device from the list of

paired devices. This option is available only after a device is

paired.

Adjusting the Backlight Brightness

Extensive use of screen backlighting can significantly reduce

battery life. You can adjust the backlight brightness to maximize

battery life.

NOTE: The backlight brightness may be limited when the

battery is low.

Select .

Select or .

The device may feel warm when the backlight setting is high.

Setting the Device Tones

You can customize tones for messages, keys, turn warnings,

and alarms.

Select Setup > Tones > Tones > On.

Select a tone for each audible type.

Marine Settings

Select Setup > Marine.

Marine Chart Mode: Sets the type of chart the device uses

when displaying marine data. Nautical displays various map

features in different colors so the marine POIs are more

readable and so the map reflects the drawing scheme of

paper charts. Fishing (requires marine maps) displays a

detailed view of bottom contours and depth soundings and

simplifies map presentation for optimal use while fishing.

Appearance: Sets the appearance of marine navigation aids on

the map.

Marine Alarm Setup: Sets alarms for when you exceed a

specified drift distance while anchored, when you are off

course by a specified distance, and when you enter water of

a specific depth.

Setting Up Marine Alarms

Select Setup > Marine > Marine Alarm Setup.

Select an alarm type.

Select On.

Enter a distance, and select Done.

Resetting Data

You can reset trip data, delete all waypoints, clear the current

track, or restore default values.

Select Setup > Reset.

Select an item to reset.

Changing the Page Sequence

Select Setup > Page Sequence.

Select a page.

Select Move.

Move the page up or down in the list.

Select ENTER.

TIP: You can select PAGE to view the page sequence.

Customizing the Device 9

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPS Map 65 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPS Map 65

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info