Bedienungsanleitung Garmin GPS MAP 66 (Seite 8 von 24) (Englisch)

674085

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Compass: Automatically switches from an electronic compass

to a GPS compass when you are traveling at a higher rate of

speed for a period of time.

Calibrate Compass: Allows you to calibrate the compass if you

experience irregular compass behavior, for example, after

moving long distances or after extreme temperature changes

(Calibrating the Compass, page 3).

Trip Computer

The trip computer displays your current speed, average speed,

trip odometer, and other helpful statistics. You can customize

the trip computer layout, dashboard, and data fields.

Trip Computer Settings

From the trip computer, select MENU.

Reset: Resets all the trip computer values to zero. For accurate

information, reset the trip information before beginning a trip.

Change Data Fields: Customizes the trip computer data fields.

Change Dashboard: Changes the theme and information

displayed on the dashboard.

NOTE: Your customized settings are remembered by the

dashboard. Your settings are not lost when you change

profiles (Profiles, page 14).

Insert Page: Inserts an additional page of customizable data

fields.

TIP: You can use the arrow keys to scroll through the pages.

Remove Page: Removes an additional page of customizable

data fields.

More Data: Adds additional data fields to the trip computer.

Less Data: Removes data fields from the trip computer.

Restore Defaults: Restores the trip computer to factory default

settings.

Altimeter

By default, the altimeter displays the elevation over the distance

traveled. You can customize altimeter settings (Altimeter

Settings, page 4). You can select any point on the plot to view

details about that point.

Altimeter Plot Settings

From the altimeter, select MENU.

Reset: Resets the altimeter data, including waypoint, track, and

trip data.

Altimeter Setup: Access additional altimeter settings (Altimeter

Settings, page 4).

Adjust Zoom Ranges: Adjusts the zoom ranges shown on the

altimeter page.

Change Data Fields: Allows you to customize the altimeter data

fields.

Restore Defaults: Restores the altimeter to factory default

settings.

Altimeter Settings

From the altimeter, select MENU > Altimeter Setup.

Auto Calibration: Automatically calibrates the altimeter each

time the device is turned on.

Barometer Mode: Variable Elevation allows the barometer to

measure changes in elevation while you are moving. Fixed

Elevation assumes the device is stationary at a fixed

elevation, so the barometric pressure should only change

due to weather.

Pressure Trending: Sets how the device records pressure

data. Save Always records all pressure data, which can be

helpful when you are watching for pressure fronts.

Plot Type: Records elevation changes over a period of time or

distance, records barometric pressure over a period of time,

or records ambient pressure changes over a period of time.

Calibrate Altimeter: Allows you to manually calibrate the

barometric altimeter (Calibrating the Barometric Altimeter,

page 4).

Calibrating the Barometric Altimeter

You can manually calibrate the barometric altimeter if you know

the correct elevation or the correct barometric pressure.

Go to a location where the elevation or barometric pressure

is known.

From the altimeter, select MENU.

Select Altimeter Setup > Calibrate Altimeter.

Select Method to select the measurement to use in

calibration.

Enter the measurement.

Select Calibrate.

Navigation

Navigating to a Destination

Select FIND.

Select a category.

Select a destination.

Select Go.

Your route appears as a magenta line on the map.

Navigate using the map (Navigating with the Map, page 4)

or compass (Navigating with the Compass, page 4).

Navigating with the Map

Begin navigating to a destination (Navigating to a

Destination, page 4).

Select Map.

A blue triangle represents your location on the map. As you

travel, the blue triangle moves and displays your path.

Complete one or more actions:

• To view different areas of the map, select , , , or .

• To zoom in and out of the map, select and .

Navigating with the Compass

When navigating to a destination, points to your destination,

regardless of the direction you are moving.

Begin navigating to a destination (Navigating to a

Destination, page 4).

Select Compass.

Turn until points toward the top of the compass, and

continue moving in that direction to the destination.

Stopping Navigation

Select FIND > Stop Navigation.

Waypoints

Waypoints are locations you record and store in the device.

Waypoints can mark where you are, where you are going, or

where you have been. You can add details about the location,

such as name, elevation, and depth.

You can add a .gpx file that contains waypoints by transferring

the file to the GPX folder (Transferring Files to Your Device,

page 15).

Creating a Waypoint

You can save your current location as a waypoint.

Select MARK.

4 Navigation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPS MAP 66 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPS MAP 66

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info