13379
49
Zoom out
Zoom in
Vorherige Seite
1/74
Nächste Seite
To enter a DGPS beacon frequency:
1. Highlight the ‘freq’ field, and press
F
.
2. Enter the desired frequency, and press
F
.
3. Highlight the ‘rate’ field, and press
F
.
4. Select the desired transmission rate, and press
F
.
Note: The ‘freq
and ‘rate’ fields are active only
when the interface is set to RTCM/NMEA.
When the GPS 126/128 is receiving DGPS correc-
tions from the GBR 21, the ‘beacon receiver’ section of
the I/O setup page will display the beacon frequency
and signal strength, as well as the distance from the
transmitter to the beacon receiver. At the bottom of the
beacon receiver field, a status message will keep you
informed of DGPS activity:
• A ‘Tuning’ message will be displayed while a bea-
con signal is being tuned.
• Once the beacon signal has been tuned, a
‘Receiving’ message will be displayed.
• If a beacon signal is tuned and no corrections are
being received, a ‘No Data’ message will be dis-
played.
• If a beacon signal cannot be tuned, a ‘No Status’
message will be displayed.
The message page will alert you to any problems
relating to DGPS operation. You may also monitor the
DGPS status from the status field on the interface page.
The GPS 126/128 will display one of three alert mes-
sages concerning DGPS operation:
No DGPS Position—
there is not enough data
available to compute a DGPS position.
No RTCM Input—
the beacon receiver is not
properly connected or the baud rates do not
match.
RTCM Input Failed—
DGPS data was being
received but has been lost.
45
REFERENCE
DGPS Interface
Choose an interface
option based upon what
equipment you are using
to transfer information.
Once the RTCM/NMEA
option is selected, you can
manually tune the beacon
receiver from the frequen-
cy field.
126/128 Manual (new) 6/15/98 9:51 AM Page 45
49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Garmin GPS126 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info