Bedienungsanleitung Garmin GPSMAP 1000 serie (Seite 15 von 60) (Englisch)

657707

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Select an option:

• To indicate the distance from your location in which AIS

vessels appear, select Display Range, and select a

distance.

• To show MARPA-tagged vessels, select MARPA >

Show

• To show details about AIS-activated and MARPA-tagged

vessels, select MARPA > Show.

• To set the projected heading time for AIS-activated and

MARPA-tagged vessels, select Proj. Heading, and enter

the time.

• To show the tracks of AIS vessels, select the length of the

track that appears using a trail, select Trails, and select

the length.

Activating a Target for an AIS Vessel

From a chart or a 3D chart view, select an AIS vessel.

Select AIS Vessel

> Activate Target

Viewing Information about a Targeted AIS Vessel

You can view the AIS signal status, MMSI, GPS speed, GPS

heading, and other information that is reported about a targeted

AIS vessel.

From a chart or a 3D chart view, select an AIS vessel.

Select

AIS Vessel.

Deactivating a Target for an AIS Vessel

From a chart or a 3D chart view, select an AIS vessel.

Select AIS Vessel

> Deactivate

Viewing a List of AIS Threats

From a chart or 3D chart view, select MENU > Other

Vessels >

List

Setting the Safe-Zone Collision Alarm

Before you can set a collision alarm, you must have a

compatible chartplotter connected to an AIS device or radar.

The safe-zone collision alarm is used only with AIS and MARPA.

MARPA functionality works with radar. The safe zone is used for

collision avoidance and can be customized.

Select Settings > Alarms >

Collision Alarm > On

A message banner appears and an alarm sounds when a

MARPA-tagged object or an AIS-activated vessel enters the

safe-zone area around your boat. The object is also labeled

as dangerous on the screen. When the alarm is off, the

message banner and audible alarm are disabled, but the

object is still labeled as dangerous on the screen.

Select

Range.

Select a distance for the safe-zone radius around your

vessel.

Select

Time To.

Select a time at which the alarm will sound if a target is

determined to intersect the safe zone.

For example, to be notified of a pending intersection 10

minutes before it will likely occur, set Time To to 10, and the

alarm will sound 10 minutes before the vessel intersects the

safe zone.

AIS Distress Signals

Self-contained AIS distress signal devices transmit emergency

position reports when activated. The chartplotter can receive

signals from Search and Rescue Transmitters (SART),

Emergency Position Indicating Radio Beacons (EPIRB), and

other man overboard signals. Distress signal transmissions are

different than standard AIS transmissions, so they appear

differently on the chartplotter. Instead of tracking a distress

signal transmission for collision avoidance, you track a distress

signal transmission to locate and assist a vessel or person.

Navigating to a Distress Signal Transmission

When you receive a distress signal transmission, a distress

signal alarm appears.

Select Review > Go To to begin navigation to the

transmission.

AIS Distress Signal Device Targeting Symbols

Symbol Description

AIS distress signal device transmission. Select to see more

information about the transmission and begin navigation.

Transmission lost.

Transmission test. Appears when a vessel initiates a test of

their distress signal device, and does not represent a true

emergency.

Transmission test lost.

Enabling AIS Transmission Test Alerts

To avoid a large number of test alerts and symbols in crowded

areas such as marinas, you can select to receive or ignore AIS

test messages. To test an AIS emergency device, you must

enable the chartplotter to receive test alerts.

Select Settings

> Alarms > AIS

Select an option:

• To receive or ignore Emergency Position Indicating Radio

Beacon (EPRIB) test signals, select

AIS-EPIRB Test.

• To receive or ignore Man Overboard (MOB) test signals,

select

AIS-MOB Test.

• To receive or ignore Search and Rescue Transponder

(SART) test signals, select AIS-SART Test.

Turning Off AIS Reception

AIS signal reception is turned on by default.

Select Settings > Other Vessels > AIS > Off.

All AIS functionality on all charts and 3D chart views is

disabled. This includes AIS vessel targeting and tracking,

collision alarms that result from AIS vessel targeting and

tracking, and the display of information about AIS vessels.

AIS Display Settings

NOTE: AIS requires the use of an external AIS device and

active transponder signals from other vessels.

From a chart or 3D chart view, select MENU

> Other Vessels >

Display Setup

Display Range: Indicates the distance from your location within

which AIS vessels appear.

MARPA: Shows details about AIS-activated vessels.

Proj. Heading: Sets the projected heading time for AIS-

activated vessels.

Trails: Shows the tracks of AIS vessels, and select the length of

the track that appears using a trail.

Chart and 3D Chart View Settings

NOTE:

Not all settings apply to all charts and 3D chart views.

Some options require premium maps or connected accessories,

such as radar.

These settings apply to the charts and 3D chart views, except

the radar overlay and Fish Eye 3D (

Fish Eye 3D Settings,

page 9)

From a chart or a 3D chart view, select MENU.

Waypoints and Tracks: See Waypoints and Tracks Settings on

the Charts and Chart Views,

page

Other Vessels: See Other Vessels Settings on the Charts and

Chart Views, page 8.

Quickdraw Contours: Turns on bottom contour drawing, and

allows you to create fishing map labels.

Charts and 3D Chart Views 7

Garmin GPSMAP 1000 serie Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 1000 serie

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info