Bedienungsanleitung Garmin GPSMAP 1000 serie (Seite 36 von 60) (Englisch)

657707

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

From a Radar screen or the Radar overlay, select MENU

Radar Setup > Crosstalk Rej.

Radar Options Menu

From a radar screen, select MENU > Radar Options.

MotionScope™: Uses the Doppler effect to detect and highlight

moving targets to help you avoid potential collisions, find

flocks of birds, and track weather formations.

Pulse Exp.: Increases the duration of the transmit pulse, which

helps maximize the energy directed toward targets. This

helps to enhance the detection and identification of targets.

Echo Trails: Enables you to track the movement of vessels on

the radar screen.

Rain Clutter: Reduces the clutter caused by rain.

Show VRM/EBL: Shows the variable range marker (VRM) circle

and the electronic bearing line (EBL) to allow you to measure

the distance and bearing from your boat to a target object.

Enable Guard Zone: Sets a safe zone around your boat and

sounds an alarm when anything enters the zone.

Timed Transmit: Helps conserve power by transmitting radar

signals at set intervals.

Radar Setup Menu

From a radar screen, select MENU > Radar Setup.

Source: Selects the radar source when more than one radar is

connected to the network.

Chart Display: Shows the chart under the radar image. When

enabled, the Chart Setup

menu appears.

Orientation: Sets the perspective of the radar display.

Crosstalk Rej.: Reduces the appearance of clutter caused by

interference from another nearby radar source.

Rotation Spd.: Sets the preferred speed at which the radar

rotates. The High Speed option can be used to increase the

refresh rate. In some situations, the radar automatically

rotates at the normal speed to improve detection, for

example, when a longer range is selected or when

MotionScope or Dual range is used.

Appearance: Sets the color scheme, look-ahead speed, and

navigation appearance.

Installation: Allows you to configure the radar for the

installation, such as setting the front of the boat and the

antenna park position.

Radar Appearance Settings

From a radar screen, select MENU > Radar Setup >

Appearance.

NOTE:

These settings do not apply to the radar overlay.

Bkgd. Color: Sets the color for the background.

Foreground Clr.: Sets the color scheme for the radar returns.

Look-Ahd. Spd.: Shifts your present location toward the bottom

of the screen automatically as your speed increases. Enter

your top speed for the best results.

Heading Line: Shows an extension from the bow of the boat in

the direction of travel on the radar screen.

Range Rings: Shows the range rings that help you to visualize

distances on the radar screen.

Bearing Ring: Shows a bearing relative to your heading or

based on a north reference, to help you determine the

bearing to an object shown on the radar screen.

Nav Lines: Shows the navigation lines that indicate the course

you have set using

Route To, Auto Guidance, or Go To.

Waypoints: Shows waypoints on the radar screen.

Radar Installation Settings

Front of Boat: Compensates for the physical location of the

radar when it is not on the boat axis (Front-of-Boat Offset,

page 28).

Antenna Configuration: Sets the radar antenna size and sets

the position in which the radar stops (Setting a Custom Park

Position

, page

28)

Enable No Transmit Zone: Sets the area in which the radar

does not transmit signals (Enabling and Adjusting a Radar

No Transmit Zone

, page

24)

Front-of-Boat Offset

The front-of-boat offset compensates for the physical location of

the radar scanner on a boat, if the radar scanner does not align

with the bow-stern axis.

Measuring the Potential Front-of-Boat Offset

The front-of-boat offset compensates for the physical location of

the radar scanner on a boat, if the radar scanner does not align

with the bow-stern axis.

Using a magnetic compass, take an optical bearing of a

stationary target located within viewable range.

Measure the target bearing on the radar.

If the bearing deviation is more than +/- 1°, set the front-of-

boat offset.

Setting the Front-of-Boat Offset

Before you can set the front-of-boat offset, you must measure

the potential front-of-boat offset.

The front-of-boat offset setting configured for use in one radar

mode is applied to every other radar mode and to the Radar

overlay.

From a Radar screen or the Radar overlay, select MENU

Radar Setup > Installation > Front of Boat

Select Up

or Down to adjust the offset.

Setting a Custom Park Position

If you have more than one radar on your boat, you must be

viewing the radar screen for the radar you want to adjust.

By default, the antenna is stopped perpendicular to the pedestal

when it is not spinning. You can adjust this position.

From the radar screen, select MENU > Radar Setup >

Installation > Antenna Configuration > Park Position.

Use the slider bar to adjust the position of the antenna when

stopped, and select BACK.

Selecting a Different Radar Source

Select an option:

• From a radar screen or the radar overlay, select MENU >

Radar Setup > Source.

• Select Settings

> Communications > Preferred

Sources > Radar

Select the radar source.

Autopilot

WARNING

You can use the autopilot feature only at a station installed next

to a helm, throttle, and helm control device.

You are responsible for the safe and prudent operation of your

vessel. The autopilot is a tool that enhances your capability to

operate your boat. It does not relieve you of the responsibility of

safely operating your boat. Avoid navigational hazards and

never leave the helm unattended.

Always be prepared to promptly regain manual control of your

boat.

28 Autopilot

Garmin GPSMAP 1000 serie Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 1000 serie

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info