Bedienungsanleitung Garmin GPSMAP 1022 (Seite 23 von 60) (Englisch)

657710

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Select a track.

Select SELECT

> Delete

Deleting All Saved Tracks

Select NAV INFO

> User Data > Clear User Data > Saved

Tracks

Retracing the Active Track

The track currently being recorded is called the active track.

Select NAV INFO

> User Data > Tracks > Follow Active

Track

Select an option:

• Select the time the active track began.

• Select

Entire Log.

Review the course indicated by the colored line.

Follow the colored line, steering to avoid land, shallow water,

and other obstacles.

Clearing the Active Track

Select NAV INFO

> User Data > Tracks > Clear Active

Track

The track memory is cleared, and the active track continues

to be recorded.

Managing the Track Log Memory During Recording

Select NAV INFO > User Data > Tracks > Active Track

Options.

Select

Record Mode.

Select an option:

• To record a track log until the track memory is full, select

Fill.

• To continuously record a track log, replacing the oldest

track data with new data, select Wrap

Configuring the Recording Interval of the Track Log

You can indicate the frequency at which the track plot is

recorded. Recording more frequent plots is more accurate but

fills the track log faster. The resolution interval is recommended

for the most efficient use of memory.

Select NAV INFO

> User Data > Tracks > Active Track

Options > Interval > Interval

Select an option:

• To record the track based on a distance between points,

select Distance

> Change

, and enter the distance.

• To record the track based on a time interval, select Time

Change

, and enter the time interval.

• To record the track plot based on a variance from your

course, select Resolution > Change, and enter the

maximum error allowed from the true course before

recording a track point. This is the recommended

recording option.

Boundaries

Boundaries allow you to avoid or remain in designated areas in

a body of water. You can set an alarm to alert you when you

enter or exit a boundary.

You can create boundary areas, lines, and circles using the

map. You can also convert saved tracks and routes into

boundary lines. You can create a boundary area using

waypoints by creating a route from the waypoints, and

converting the route into a boundary line.

You can select a boundary to act as the active boundary. You

can add the active boundary data to the data fields on the chart.

Creating a Boundary

Select NAV INFO

> User Data > Boundaries > New

Select a boundary shape.

Follow the on-screen instructions.

Converting a Route to a Boundary

Before you can convert a route to a boundary, you must create

and save at least one route (Creating and Saving a Route,

page 12)

Select NAV INFO

> User Data > Routes

Select a route.

Select Review >

Edit Route > Save as Boundary

Converting a Track to a Boundary

Before you can convert a track to a boundary, you must record

and save at least one track (Saving the Active Track, page 14)

Select NAV INFO

> User Data > Tracks > Saved Tracks

Select a track.

Select SELECT > Edit Track > Save as Boundary.

Editing a Boundary

Select NAV INFO

> User Data > Boundaries

Select a boundary.

Select Review > Edit Boundary.

Select an option:

• To edit the appearance of the boundary on the chart,

select

Display Options.

• To change the boundary lines or name, select Edit

Boundary.

• To edit the boundary alarm, select Alarm

Setting a Boundary Alarm

Boundary alarms alert you when you are within a specified

distance of a set boundary.

Select NAV INFO

> User Data > Boundaries

Select a boundary.

Select Alarm

> On

Enter a distance.

Deleting a Boundary

Select NAV INFO

> User Data > Boundaries

Select a boundary.

Select Review

> Edit Boundary > Delete

Synchronizing User Data Across the

Garmin

Marine Network

NOTICE

Before you synchronize the user data across the network, you

should backup your user data to prevent possible data loss. See

Backing Up Data to a Computer,

page

46.

You can share waypoints, tracks, and routes with all compatible

devices connected to the Garmin Marine Network (Ethernet)

automatically.

NOTE:

This feature is not available on all models.

Select

Settings > Preferences > User Data Sharing > On.

If a change is made to a waypoint, track, or route on one

chartplotter, that data is synchronized automatically across all

chartplotters on the Ethernet network.

Deleting All Saved Waypoints, Routes, and

Tracks

Select

NAV INFO

> User Data > Clear User Data > All >

Navigation with a Chartplotter 15

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 1022 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 1022

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info