Bedienungsanleitung Garmin GPSMAP 1022 (Seite 47 von 60) (Englisch)

657710

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Weather Overlay

The weather overlay superimposes weather and weather-related

information on the Navigation chart, the Fishing chart, and the

Perspective 3D chart view. The Navigation chart and the Fishing

chart can show weather radar, height of cloud tops, lightning,

weather buoys, county warnings, and hurricane warnings. The

Perspective 3D chart view can show weather radar.

Weather overlay settings configured for use on one chart are not

applied to another chart. The weather overlay settings for each

chart must be configured separately.

NOTE:

The offshore Fishing chart is available with premium

charts, in some areas.

Turning On the Weather Overlay on a Chart

From the Navigation chart or Fishing chart, select MENU >

Chart Setup

> Weather > Weather > On

Weather Overlay Settings on the Navigation Chart

From the Navigation chart, select MENU

> Chart Setup >

Weather

Weather: Turns on and off the weather overlay.

Precipitation: Shows precipitation data.

Cloud Cover: Shows cloud cover data.

Visibility: Shows visibility data.

Buoys: Shows weather buoys.

Legend: Shows the weather legend.

Weather Overlay Settings on the Fishing Chart

From the Fishing chart, select MENU > Chart Setup > Weather.

Precipitation: Shows precipitation radar.

Sea Temperature: Shows sea temperature data.

Buoys: Shows weather buoys.

Legend: Shows the weather legend.

Viewing Weather Subscription Information

You can view information about the weather services you have

subscribed to and how many minutes have passed since the

data for each service was updated.

From a weather chart, select

> Weather

Subscription

Viewing Video

Before you can view video, you must connect to a compatible

source.

Compatible devices include video devices connected to the

ports on the chartplotter or to the Garmin

Marine Network, as

well as supported network (IP-based) video cameras, encoders,

and thermal cameras.

Select

A/V, Gauges, Controls > Video.

Selecting a Video Source

From the video screen, select MENU >

Source

Select the source of the video feed.

Alternating Among Multiple Video Sources

If you have two or more video sources, you can alternate

between them using a specific time interval.

From the video screen, select MENU >

Source > Alternate

Select

Time, and select the amount of time each video

appears.

Select Source, and select the video sources to add to the

alternating sequence.

Networked Video Devices

NOTICE

A Garmin Power over Ethernet (PoE) Isolation Coupler (P/N

010-10580-10) must be used when connecting a PoE device,

such as a FLIR

camera, to a

Garmin Marine Network.

Connecting a PoE device directly to a Garmin Marine Network

chartplotter damages the Garmin chartplotter and may damage

the PoE device.

Before you can view and control video devices such as IP

cameras, encoders, and thermal cameras using your

chartplotter, you must have a compatible video device

connected to your chartplotter, and you must have a marine

network cable Power over Ethernet (PoE) isolation coupler. Go

to www.garmin.com for a list of compatible devices or to

purchase a PoE Isolation Coupler.

You can connect multiple supported video cameras and up to

two video encoders to the Garmin Marine Network. You can

select and view up to four video sources at once. Chartplotters

with multiple composite built-in video inputs can display a single

built-in video input only. When the cameras are connected, the

network detects them automatically and displays them in the

source list.

Naming Video Presets on a Networked Video Camera

From a video screen, select MENU > Video Setup >

Name

Enter preset name.

Camera Settings

Some cameras provide additional options to control the camera

view.

NOTE:

Not all options are available on all camera models and

chartplotter models. Refer to the camera manual for a list of

available features. You may need to update the camera

software to use this feature.

From the infrared video screen, select MENU.

IR/Visible: Displays an infrared or visible camera image.

Scan: Surveys the surrounding area.

Freeze: Pauses the camera image.

Change Colors: Selects the color scheme of the infrared image.

Change Scene: Selects the infrared image mode, such as day,

night, MOB, or docking.

Video Setup: Opens more video options.

Video Settings

Some cameras provide additional setup options.

NOTE:

Not all options are available on all camera models and

chartplotter models. You may need to update the camera

software to use this feature.

From the video screen, select

MENU > Video Setup.

Set Input: Associates the camera with a video source.

Mirror: Reverses the image like a rearview mirror.

Standby: Places the camera in standby mode to conserve

power and protect the lens when not in use.

Home Position: Sets the home position of the camera.

Scan Speed: Sets how quickly the camera moves during a

scan.

Scan Width: Sets the width of the image captured by the

camera during a scan.

Name: Allows you to enter a new name for this camera.

FLIR™ Menu: Provides access to the settings for the camera.

Associating the Camera to a Video Source

You may need to associate the camera with a video source.

From the video screen, select MENU

> Source

Select the camera.

Viewing Video 39

Garmin GPSMAP 1022 Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 1022

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info