Bedienungsanleitung Garmin GPSMAP 1222 (Seite 49 von 60) (Englisch)

657709

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Controlling the VIRB Action Camera Video Playback

You can view VIRB action camera video and images using the

chartplotter.

NOTE: The VIRB playback on the chartplotter is shown in the

same quality as the live view on the chartplotter. To view the

high-resolution video, view the video on a computer or

television.

From the VIRB® screen, select .

Wait a few seconds for the thumbnail images to load.

Select a video or image.

Control the playback using the on-screen buttons or menu

options:

• To stop the video, select .

• To pause the video, select .

• To replay the video, select .

• To play the video, select .

Deleting a VIRB Video

You can delete a video or image from the VIRB action camera.

Open the VIRB video or image to delete.

Select MENU >

Delete File

Starting a VIRB Video Slideshow

You can view a slideshow of the videos and images on the VIRB

action camera.

From the

VIRB® screen, select

Wait a few seconds for the thumbnail images to load.

Select a video or image.

Select MENU

> Start Slideshow

To stop the slideshow, selcet MENU > Stop Slideshow.

Device Configuration

Turning On the Chartplotter Automatically

You can set the chartplotter to turn on automatically when the

power is applied. Otherwise, you must turn on the chartplotter by

pressing

Select Settings

> System > Auto Power Up

NOTE:

When Auto Power Up is On, and the chartplotter is

turned off using

, and power is removed and reapplied

within less than two minutes, you may need to press to

restart the chartplotter.

System Settings

Select

Settings

> System

Sounds and Display: Adjusts the display and audio settings.

GPS: Provides information about the GPS satellites and

settings.

System Information: Provides information about the devices on

the network and the software version.

Station Information: Adjusts the setup of the station.

Auto Power Up: Controls what turns on automatically when

power is applied.

Simulator: Turns the simulator on or off and allows you to set

the time, date, speed, and simulated location.

Station Settings

Select Settings

> System > Station Information

Change Station: Sets the entire station to a new set of defaults

based on the location of this station. You can also select to

use this display as a stand-alone, individual display, instead

of grouping it with other displays to make a station.

GRID™ Pairing: Allows you to pair a GRID

™

remote input

device with this station.

Display Order: Sets the order of the displays, which is

important when using a GRID remote input device.

Autopilot Enabled: Allows you to control the autopilot from this

device.

Reset Layouts: Restores the factory default view for the layouts

in this station.

Reset Stations: Restores the factory default layouts for all

displays in the station.

Viewing System Software Information

You can view the software version, the basemap version, all

supplemental map information (if applicable), the software

version for an optional Garmin

radar (if applicable), and the unit

ID number. You may need this information to update the system

software or to purchase additional map data information.

Select

Settings > System >

System Information

Viewing the Event Log

The event log shows a list of system events.

Select Settings > System >

System Information > Event

Log

Preferences Settings

Select

Settings

> Preferences

Units: Sets units of measure.

Language: Sets the on-screen text language.

Navigation: Sets navigation preferences.

Keyboard Layout: Arranges the keys on the on-screen

keyboard.

Screenshot Capture: Allows the device to save images of the

screen.

User Data Sharing: Allows you to share waypoints and routes

over the

Garmin Marine Network. All chartplotters that share

waypoints and routes must have this setting turned on.

Menu Bar Display: Shows or automatically hides the menu bar

when it is not needed.

Units Settings

Select Settings

> Preferences > Units

System Units: Sets the unit format for the device.

Variance: Sets the magnetic declination, the angle between

magnetic north and true north, for your present location.

North Reference: Sets the direction references used in

calculating heading information. True

sets geographic north

as the north reference. Grid sets grid north as the north

reference (000º). Magnetic sets the magnetic north as the

north reference.

Position Format: Sets the position format in which a given

location reading appears. Do not change this setting unless

you are using a map or chart that specifies a different

position format.

Map Datum: Sets the coordinate system on which the map is

structured. Do not change this setting unless you are using a

map or chart that specifies a different map datum.

Time: Sets the time format, time zone, and daylight saving time.

Navigation Settings

NOTE:

Some settings and options require additional charts or

hardware.

Select

Settings

> Preferences > Navigation

Route Labels: Sets the type of labels shown with route turns on

the map.

Device Configuration 41

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 1222 Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 1222

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info