Bedienungsanleitung Garmin GPSMAP 182C (Seite 74 von 104) (Englisch)

522235

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

Reference

Main Menu:

Units Tab

• Heading— lets you select the reference used in calculating heading information. You can select from

‘Auto Mag Var’, ‘True’, ‘Grid’ and ‘User Mag Var’. ‘Auto Mag Var’ provides magnetic north heading

references which are automatically determined from your current position. ‘True’ provides headings

based upon a true north reference. ‘Grid’ provides headings based on a grid north reference (and

is used in conjunction with the grid position formats described on page 63). ‘User Mag Var’ allows

you to specify the magnetic variation at your current position and provides magnetic north heading

references based upon the variation you enter.

To enter a user deﬁ ned magnetic variation:

1. With the “Heading” ﬁ eld set to ‘User Mag Var’, highlight the heading reference ﬁ eld (immediately

to the right) and press ENTER/MARK.

2. Use the ARROW KEYPAD to enter the magnetic variation at your current position and press

ENTER/MARK.

• Distance, Speed and Elevation— lets you select the desired units of measure for distance, speed and

elevation readouts in ‘Nautical’ (nm, kt, ft), ‘Nautical’ (nm, kt, m), ‘Statute’ (mi, mh, ft) or ‘Metric’

(km, kh, m) terms.

• Depth— lets you select the desired units of measure for depth in Feet (ft), Fathoms (fa) or Meters

(m).

• Temperature— lets you select the desired units of measure for temperature in Fahrenheit (°F) or

Celsius (°C).

Comm (Communications) Tab— lets you control the input/output format used when connecting your

GPSMAP 182/182C/232 to a GSD 20 Sonar Module, external NMEA devices, a DGPS beacon receiver, a

personal computer, another Garmin GPSMAP 182/182C/232, etc. Note: If a DGPS receiver is used, WAAS

capability will automatically be turned to ‘Off’. See pg. 87 for wiring and NMEA version information. The

unit supports two input/output ports. Individual Port settings are:

Port 1—

• GARMIN Data Transfer— the proprietary format used to upload/download MapSource data, exchange

waypoint, route, track, almanac, and proximity data with a PC or another Garmin GPSMAP 182/182C/

232. When you select ‘GARMIN Data Transfer’, there are 11 Transfer Modes to choose from: Host,

Request Almanac, Request Proximity, Request Routes, Request Tracks, Request Waypoints, Send Almanac,

Send Proximity, Send Routes, Send Tracks and Send Waypoints.

You may manually enter a

magnetic variation.

WARNING: If ‘User Mag Var’ is selected, you must

periodically update the magnetic variation as your

position changes. Using this setting, the unit will not

automatically calculate and update the magnetic

variation at your present position. Failure to update

this setting may result in substantial differences

between the information displayed on your unit and

external references, such as a magnetic compass

182C Manual Part 2.indd 64 6/4/2003, 2:54:19 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 182C Seite 74

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info