Bedienungsanleitung Garmin GPSMAP 2106 (Seite 30 von 106) (Englisch)

583757

Zoom out

Zoom in

Vorherige Seite

1/106

Nächste Seite

22 GPSMAP 2106/2110 Owner’s Manual

BASIC OPERATION > NAVIGATING TO A DESTINATION

5. To change the name of the saved track, highlight the Name ﬁeld and press

ENTER, make any changes, and press ENTER again.

6. To specify the color used to show the saved track line on the map and

highway, highlight the Color ﬁeld and press ENTER, choose a color, and

press ENTER again.

7. To show the track on the Map and Highway Pages, highlight the check box

to the left of Show on map and highway, and press ENTER.

8. Press the OK soft key to save the track log.

To review and edit a track:

1. On the Saved sub tab, highlight a track and press ENTER to open the

Saved Track Page.

2. Make any changes, and then press QUIT.

Initiating a Follow Track

You must save a track before using the Follow Track option. If there are no saved

tracks, the message “There are no Saved Tracks to follow” appears.

To follow a track using the NAV key:

1. Press NAV, highlight Follow Track, and press ENTER. The Select Track

Page appears.

2. Highlight the track you want to follow, and press ENTER.

3. To invert the Follow Track (navigate it in the reverse direction), press NAV,

highlight Invert Route, and press ENTER.

To start a TracBack using the NAV key:

1. Press NAV to open the Navigation menu.

2. Highlight TracBack, and press ENTER. The TracBack Through window

appears.

3. Highlight the time, date, or Entire Log, and press ENTER.

To stop TracBack navigation:

1. Press NAV.

2. Highlight Stop Navigation, and press ENTER.

TracBack Tips

When a TracBack is active, the GPSMAP 2106/2110 takes the track log stored

in memory and divides it into segments called legs. Up to 300 temporary turns

(BEGIN, TURN 1, TURN 2,...., TURN X, END) are created to mark the most

signiﬁcant features of the track log to duplicate your exact path as closely as

possible. To get the most out of the TracBack feature, remember the following

tips:

• Always clear the track log at the starting point.

• The Record Mode option on the track log setup page must be set to Fill or

Wrap.

• At least two track log points must be stored in memory to create a

TracBack route.

• If the track log Interval ﬁeld is set to Time

, the route may not follow your

exact path (keep the interval set to Resolution for best performance).

• If the receiver is turned off or satellite coverage is lost during your trip,

TracBack draws a straight line between any point where coverage was lost

and where it resumed.

• If your track log’s changes in distance and direction are too complex,

300 waypoints might not mark your path accurately. The receiver then

assigns the 300 waypoints to the most signiﬁcant points of your track, and

simpliﬁes segments with fewer changes in direction.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 2106 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info