Bedienungsanleitung Garmin GPSMAP 3006C (Seite 73 von 96) (Englisch)

522241

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Getting Started

Main Page Sequence

Reference

The following additional formats are available:

• hddd.ddddd° – latitude/longitude in decimal degrees only

• hddd°mm’ss.s” – latitude/longitude in degrees, minutes, seconds

• UTM/UPS – Universal Transverse Mercator / Universal Polar Stereographic grids

• British Grid • Dutch Grid • Finnish KKJ27 • German Grid

• India Zones • Irish Grids • Loran TD • Maidenhead

• MGRS • New Zealand • Qatar Grid • RT90

• Swedish Grid • Swiss Grid • Taiwan Grid • User Grid

• W Malayan RSO

For additional information on Loran TD setup, see page 80.

• Depth – lets you select the desired units of measure for depth in Feet (ft), Fathoms (fa) or Meters

(m). You must be receiving NMEA Sonar depth data or using a Garmin Sonar Module for the Depth

to display.

• Map Datum – allows you to manually select the datum reference used to determine a given posi-

tion. The default setting is ‘WGS 84’. The unit automatically chooses the best datum depending

upon your chosen position format. Datums are used to describe geographic positions for surveying,

mapping, and navigation and are not actual maps built in the unit. Although over 100 datums are

available (as listed on pages 78-79), you should only change the datum if you are using a map or

chart that speciﬁ es a different datum.

WARNING: Selecting the wrong map datum can result in substantial position errors.

• Temperature – lets you select the desired units of measure for temperature in Fahrenheit (°F)

or Celsius (°C). You must be receiving NMEA Sonar temperature data or using a Garmin Sonar

Module for the Temperature to display.

• Distance, Speed and Elevation – lets you select the desired units of measure for distance, speed and

elevation readouts in ‘Nautical’ (nm, kt, ft), ‘Nautical’ (nm, kt, m), ‘Statute’ (mi, mh, ft) or ‘Metric’

(km, kh, m) terms.

• Pressure – allows you select the desired units of measure for weather readouts in ‘Inches Mercury’

(in), ‘Millibars’ (mb), or ‘Hectopascals’ (hPa). You must be using a Garmin Weather product for this

data to display.

WARNING: If ‘User Mag Var’ is selected, you must peri-

odically update the magnetic variation as your position

changes. Using this setting, the unit does not automatically

calculate and update the magnetic variation at your pres-

ent position. Failure to update this setting may result in

substantial differences between the information displayed

on your unit and external references, such as a magnetic

compass.

The Units tab settings affect how navigation information is

displayed on the GPSMAP 3006C/3010C. When in doubt,

seek assistance.

If you are using a map or chart in conjunction with your

GPS, make sure the settings under the ‘Units’ tab of the

GPSMAP 3006C/3010C match that of the map or chart.

This information should be displayed somewhere on the

map or chart. If the information is not present, contact the

map or chart maker to determine what position format,

datum, heading and units of measure are being used for

the map or chart.

Main Menu: System Tab

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 3006C Seite 73

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 3006C

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info