Bedienungsanleitung Garmin GPSMAP 3210 (Seite 91 von 130) (Englisch)

583643

Zoom out

Zoom in

Vorherige Seite

1/130

Nächste Seite

GPSMAP 3206/3210 Owner’s Manual 83

usIng sonar > sonar tab

sonar

General Sub Tab

Use the General sub tab to select the water type, depth number, automatic scroll

speed limit, scale, keel offset, and transducer type. The available General sub tab

options are as follows:

Auto Gain—controls the aggressiveness of the Auto Gain when the Gain

option is set to Auto. The higher the setting, the greater the number of

targets appear on the screen. The lower the setting, the less clutter on the

screen. The settings are Low, Medium (default), and High.

Auto Color Gain—controls what colors are applied to the objects on the

screen when the Color Gain option is set to Auto. Color DCG™ is based

on depth and makes it easier to spot subtle changes in bottom conditions

or sh sizes. DynaColor™ (default) represents the latest in sonar data

presentation and is recommended for all applications. The presentation is

based on bottom strength. It makes the bottom and the sh easier to see and

requires fewer adjustments.

Automatic Scroll Speed Limit

—automatically adjusts the Scroll rate

with the speed of your vessel. Enter your maximum cruising speed, and

the scroll rate adjusts to 100% when you reach that speed. One half of that

speed produces a 50% scroll rate, and so on. The default is 30.0 kt.

Keel Offset—allows you to offset the surface reading for the depth of a

keel. This makes it possible to measure depth from the bottom of your keel

instead of from a transducer’s location near the water line. Enter a positive

number to offset for a keel. You can also enter a negative number to

compensate for a large vessel that may draw several feet of water, requiring

the transducer to be submerged if you want to measure from the water line.

The Keel Offset is reected in the depth reading.

•

Transducer at surface.

Enter (+) a positive

number to show depth

from bottom of keel.

Transducer at bottom of keel.

Enter (-) a negative number to

show depth from surface.

Transducer Type—allows you to specify what type of transducer you are

using, either Dual Beam or Dual Frequency.

Custom Range—allows you to specify a custom viewing range or scale.

When On, this range appears as Custom in the Range setting. The left

value is the top of the scale and the right value is the bottom of the scale.

Calibrate Water Speed—this is available only if you are using a speed-

capable transducer/sensor. Calibration is required to ensure that the Water

Speed shown on your unit is accurate. The unit automatically uses the GPS

ground speed, if it is available, for comparison on the calibration. If a GPS

ground speed is not available, use either your boat’s speedometer reading

(not always accurate) or a stopwatch to determine your speed over a certain

distance (distance / time = speed). It is recommended that you calibrate in

water having little or no current.

•

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 3210 Seite 91

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info