Bedienungsanleitung Garmin GPSMAP 3210 (Seite 114 von 130) (Englisch)

583643

114

Zoom out

Zoom in

Vorherige Seite

1/130

Nächste Seite

106 GPSMAP 3206/3210 Owner’s Manual

aPPendIX > loran td sYsteM

appendIX

LORAN TD System

LORAN-C is a radio navigation aid operated and maintained in the United States

by the United States Coast Guard. The LORAN (LOng RAnge Navigation)

system covers the entire United States and the U.S. Coastal Conuence Zone.

From the perspective of a mariner, the system is used for ocean and coastal

navigation. It can be used as a supplemental system for harbor and harbor

approach navigation, and it is used for inland navigation by recreational vehicles.

LORAN TD Feature

The LORAN TD (Time Delay) feature eases the transition from using LORAN

to using GPS. The GPSMAP unit automatically converts GPS coordinates to

LORAN TD for those who have a collection of LORAN xes for favorite shing

spots and other waypoints recorded as TDs. You can display your position as a

TD or enter waypoints as TDs. The accuracy to be expected from this conversion

is approximately 30 meters. When the unit is placed in the LORAN TD format

mode, it simulates the operation of a LORAN receiver. Position coordinates may

be displayed as TDs, and all navigation functions may be used as if the unit was

actually receiving LORAN signals.

Using the LORAN TD Format

When creating new waypoints using LORAN TD coordinates, you must set the

correct LORAN chain number and secondary stations in the Setup TD eld

before storing a waypoint. You must have the correct chain number as well as the

secondary station identiers to use this option correctly. These values vary for

each coordinate set or geographical location. Failure to enter correct information

could result in inaccuracies for the desired destination. After the waypoint is

stored in the unit’s memory, it always references the LORAN chain number

and secondary stations currently selected in the Setup TD eld. If you enter a

different LORAN chain number, change the secondary stations or offsets in the

Setup TD eld, the active waypoint information reects those changes. Because

the GPSMAP 3206/3210 unit does not rely on the LORAN signal for navigation,

it can reference a different GRI chain or secondary stations and still navigate to

the location stored in memory.

The LORAN Position Format eld is located on the Units sub tab on the Main

Menu—System tab. The Loran TD Setup window contains the elds to select the

LORAN Chain Number, Primary and Secondary Stations, and TD Offsets.

To set up LORAN TD from the Main Menu:

1. UsingtheROCKER,highlighttheSystemtab,pressrightontheROCKER

tohighlighttheUnitssubtab.HighlightthePosition Formateld,and

pressENTER.

2. HighlightLoran TD,andpressENTER,andthenhighlighttheSetup

buttontotheright,andpressENTERagain.

3. Tochangethesettingsofanyoftheveelds,highlighttheeld,press

ENTER,selectthesettingyouwant,andpressENTERagain.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 3210 Seite 114

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info