Bedienungsanleitung Garmin GPSMAP 4010 (Seite 20 von 116) (Englisch)

501933

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

16 GPSMAP

4000/5000 Series Owner’s Manual

Charts and 3D Chart Views

Heading and Projected Course of Activated AIS Targets

When heading and course over ground information are provided by an activated AIS target, the heading of the

target appears on a chart as a solid line attached to the AIS target symbol. A heading line does not appear on a

3D chart view.

The projected course of an activated AIS target appears as a dashed line on a chart or a 3D chart view. The

length of the projected course line is based on the value of the projected heading setting (page 16). If an

activated AIS target is not transmitting speed information, or if the vessel is not moving, a projected course

line does not appear. Changes in the speed, the course over ground, or the rate-of-turn information transmitted

by the vessel can impact the calculation of the projected course line.

When course over ground, heading, and rate of turn information are provided by an activated AIS target

➊

, the

projected course

➋

of the target is calculated based on the course over ground and the rate of turn information.

The direction in which the target is turning, which is also based on the rate of turn information, is indicated by

the direction of the barb

➌

at the end of the heading line

➍

. The length of the barb does not change.

➍

➌

➋

➊

Target with Projected Course, Heading, and Direction of Turn

When course over ground and heading

➎

information are provided by an activated AIS target

➏

, but rate of

turn information is not provided, the projected course

➐

of the target is calculated based on the course over

ground information.

➎

➐

➏

Target with Projected Course and Heading

Turning Off AIS Reception

AIS signal reception is turned on by default.

From the Home screen, select  >  > >.

All AIS functionality on all charts and on all 3D chart views is disabled. This includes AIS vessel targeting

and tracking, collision alarms that result from AIS vessel targeting and tracking, and the display of

information about AIS vessels.

Showing AIS and MARPA Vessels on a Chart or on a 3D Chart View

AIS requires the use of an external AIS device and active transponder signals from other vessels. Mini

Automatic Radar Plotting Aid (MARPA) functionality works with radar (page 68).

You can congure how other vessels appear on a chart or on a 3D chart view. The display range and MARPA

settings congured for one chart or one 3D chart view are applied only to that chart or to that 3D chart view.

The details, projected heading, and trails settings congured for one chart or one 3D chart view are applied to

all charts and to all 3D chart views.

: The Mariner’s Eye 3D chart view is available if you use a BlueChart g2 Vision data card. The Fishing

chart is available if you use a BlueChart g2 Vision data card or a BlueChart g2 Data card, or if your built-in

map supports Fishing Charts.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 4010 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 4010

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info