Bedienungsanleitung Garmin GPSMAP 4010 (Seite 35 von 116) (Englisch)

501933

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

GPSMAP

4000/5000 Series Owner’s Manual 31

Navigation

Basic Navigation Questions

Question Answer

How do I make the chartplotter point me in the

direction in which I want to go (bearing)?

Navigate using Go To� See “Setting and following a Direct

Course Using Go To” (page 32)�

How do I make the chartplotter giude me

along a straight line (minimizing cross track)

to a location using the shortest distance from

the present location?

Build a single-leg route and navigate it using Route To (page

34)�

How do I make the chartplotter guide me to a

location while avoiding obstacles?

Build a multi-leg roue and navigate is using Route To� See

“Creating and Navigating a Route from Your Present Location”

(page 34)�

How do I make the chartplotter steer my

automatic pilot?

Navigate using Route To (page 34)�

Note: To navigate a route created by the Auto Guidance

feature with an automaitc pilot, your chartplotter mych be

connected to a Garmin GHP series automatic pilot over a

NMEA 2000 network�

Can the chartplotter create a path for me? If you have a BlueChare g2 Vision data card, navigate using

Auto Guidance� See “Setting and Following a Course Using

Auto Guidance” (page 32)�

How do I change the Auto Gudance settings

for my boat?

See “Auto Guidance Line Congurations” (page 53)

Navigation with a Chartplotter

To navigate using a GPSMAP 4000 or 5000 series chartplotter, you must rst choose a destination, set a course

or create a route, and follow the course or route. You can follow the course or the route on the Navigation

Chart, the Fishing Chart, Perspective 3D, or Mariner’s Eye 3D.

: The Mariner’s Eye 3D chart view is available if you use a BlueChart g2 Vision data card. The Fishing

Chart is available if you use a BlueChart g2 Vision data card or a BlueChart g2 Data card, or if your built-in

map supports Fishing Charts.

Destinations

You can select destinations using the Navigation Chart or the Fishing Chart, or you can select a destination

using the Where To? feature.

Selecting a Destination Using the Navigation Chart

1. From the Home screen, select  > .

2. Select the destination to which you want to navigate.

Selecting a Destination Using Where To?

1. From the Home screen, select .

2. Complete an action:

• Select  to view a list of preloaded locations and locations you marked previously (page 32).

• Select  to view a list of routes you saved previously (page 33).

• Select  to view a list of recorded tracks (page 36).

• Select  to view a list of marinas and other offshore points of interest, listed by name

(page 39).

• Select  to search waypoints, routes, tracks, and offshore points of interest by name

(page 40).

3. Select a destination.

Courses

You can set and follow a course to a destination using one of three methods: Go To, Route To, or Guide To.

• —takes you directly to the destination.

• —creates a route from your location to a destination, allowing you to add turns along the way.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 4010 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 4010

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info