Bedienungsanleitung Garmin GPSMAP 4010 (Seite 53 von 116) (Englisch)

501933

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

GPSMAP

4000/5000 Series Owner’s Manual 49

Almanac, Environmental, and On-boat Data

Fuel Gauges

A maximum of two fuel gauges, an upper gauge and a lower gauge, appear above and below the speedometer

in the center of the Fuel Gauges page. You must have fuel level sensors in your fuel tanks or a fuel ow sensor

to capture the data shown in the fuel gauges.

If you use only a fuel ow sensor, the amount of fuel onboard is the estimated fuel level, and it is based on the

total tank size, the recorded amount of fuel in the tanks, and the fuel ow rate.

The number and conguration of fuel gauges that appear is based on the number and type of onboard fuel data

sensors, as shown below.

0 Fuel Level Sensors 1 Fuel Level Sensor 2 or More Fuel Level Sensors

0 Fuel Flow Sensors No fuel gauges appear� 1 fuel gauge appears� 2 fuel gauges appear�

1 or More Fuel Flow

Sensors

1 fuel gauge appears with

estimated fuel level�

1 fuel gauge appears� 2 fuel gauges appear�

Viewing Fuel Gauges

To view fuel information, your chartplotter must be connected to an external fuel sensor, such as the Garmin

GFS

™

10.

1. From the Home screen, select  > .

2. Move from the engine gauge screens to the fuel gauge screen:

• For the GPSMAP 4000 series, use the .

• For the GPSMAP 5000 series, select the left and right arrows at the top of the page.

Customizing Gauge Limits

See “Customizing Engine and Fuel Gauge Limits” (page 47).

Activating and Customizing Gauge Alarms

See “Activating Engine and Fuel Gauge Status Alarms” (page 47) and “Customizing Engine and Fuel

Gauge Status Alarms” (page 47).

Synchronizing Fuel Gauge Readings with Fuel Levels

1. From the Home screen, select  >  > .

2. Complete an action:

• Select  when your tanks are full. The fuel level is reset to maximum capacity. Adjust

if necessary.

• Select  when you have added less than a full tank. Enter the amount of fuel added.

Select . An estimate of the fuel added appears. Adjust if necessary.

• Select to specify the total fuel in your tanks. Enter the fuel amount. Select

.

Selecting a Fuel Economy Data Source

1. From the Home screen, select  >  >  > .

2. Indicate the source of the speed data that is used to calculate the fuel economy:

• Select  > .

• Select  >  to use data from a speed wheel.

Trip Gauges

Viewing Trip Gauges

Trip gauges show information for odometer, speed, time, and fuel for your present trip.

From the Home screen, select  > .

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 4010 Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 4010

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info