Bedienungsanleitung Garmin GPSMAP 4010 (Seite 62 von 116) (Englisch)

501933

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

58 GPSMAP

4000/5000 Series Owner’s Manual

Device Conguration

Wind VMG and Waypoint VMG in the Data Bars

The chartplotter automatically switches between showing wind VMG and waypoint VMG in the data bars.

Waypoint VMG appears under the following conditions:

• The route leg section of the navigation data bar shows waypoint VMG when you are navigating a route or

an Auto Guidance line.

• The sailing data bar shows waypoint VMG when you are navigating a route or an Auto Guidance line, and

you turn the route leg section of the navigation data bar off.

Wind VMG appears under the following conditions:

• The sailing data bar shows wind VMG when you are not navigating a route or an Auto Guidance line.

• The sailing data bar shows wind VMG when the route leg section of the navigation data bar is on and you

are navigating a route.

Showing the Compass Tape on a Chart

The compass tape appears in a row across the top of a chart or a 3D chart view. It shows the present heading,

and an indicator that shows the bearing to the desired course appears while navigating.

1. From the Home screen, select .

2. Select a chart or a 3D chart view.

3. Select  >  >  > .

Other Vessels

You can show and congure information about other vessels for the Navigation Chart, the Fishing Chart,

Perspective 3D, or Mariner’s Eye 3D.

: To congure Automatic Identication System (AIS) information for other vessels, your chartplotter

must be connected to an external AIS device. MARPA requires the use of a heading sensor. The heading sensor

must output the NMEA 0183 sentence HDM or HDG. See “About MARPA” (page 68).

Viewing a List of AIS and MARPA Threats

See “Viewing a List of AIS and MARPA Threats” (page 18).

Conguring the Appearance of Other Vessels

: The Mariner’s Eye 3D chart view is available if you use a BlueChart g2 Vision data card. The Fishing

chart is available if you use a BlueChart g2 Vision data card or a BlueChart g2 Data card, or if your built-in

map supports Fishing Charts.

1. From the Home screen, select .

2. Select , , , or .

3. Select  > > .

4. Complete an action:

• Select  to indicate the distance from your location within which AIS vessels appear.

Select a distance.

• Select >  to show information about MARPA-tagged vessels.

• Select  >  to show details about other vessels.

• Select  to set the projected heading time for MARPA-tagged vessels. Enter the heading.

Select .

• Select  to show the tracks of AIS vessels. Select the length of the track that appears using a trail.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 4010 Seite 62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 4010

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info