Bedienungsanleitung Garmin GPSMAP 4010 (Seite 104 von 116) (Englisch)

501933

104

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

100 GPSMAP

4000/5000 Series Owner’s Manual

Digital Selective Calling

Vessel Trails on the Navigation Chart

You can view trails for all tracked vessels on the Navigation Chart, the Fishing Chart, the Mariner’s Eye 3D

Chart view, and the Radar Overlay. By default, a black dot

➊

appears for each previously reported position of

a tracked vessel, and a Blue Flag symbol

➋

indicates the last reported position of the vessel. A black line

➌

indicating the path of the vessel also appears.

You must enable the DSC Trails setting in order to view trails for tracked vessels (page 100).

: The Mariner’s Eye 3D chart view is available if you use a BlueChart g2 Vision data card. The Fishing

Chart is available if you use a BlueChart g2 Vision data card or a BlueChart g2 Data card, or if your built-in

map supports Fishing Charts.

➌

➋

➊

Vessel Trail on the Navigation Chart

Showing and Setting the Duration of Trails for All Tracked Vessels

: The Mariner’s Eye 3D chart view is available if you use a BlueChart g2 Vision data card. The Fishing

Chart is available if you use a BlueChart g2 Vision data card or a BlueChart g2 Data card, or if your built-in

map supports Fishing Charts.

1. From the Home screen, select .

2. Select , , , or .

3. Select  >  >  > .

4. Select the number of hours to show tracked vessels on the chart or 3D chart view.

For example, if you select , all trail points that are less than four hours old appear for all tracked

vessels.

Individual Routine Calls

When you connect your Garmin chartplotter to a Garmin VHF NMEA 2000-compatible radio, you can use

the chartplotter interface to set up an individual routine call. When setting up an individual routine call from

your chartplotter, you can select the DSC channel on which you want to communicate (page 100). The radio

transmits this request with your call.

Selecting a DSC Channel

The selection of a DSC channel is limited to those channels that are available in all frequency bands:

6, 8, 9, 10, 13, 15, 16, 17, 67, 68, 69, 71, 72, 73, or 77. The default channel is 72. If you select a different

channel, the chartplotter uses that channel for subsequent calls until you call using another channel.

1. From the Home screen, select  > .

2. Select a vessel or a station to call.

3. Select  >  > .

4. Select a channel.

Making an Individual Routine Call

: When initiating a call from the chartplotter, if the radio does not have an MMSI number programmed,

the radio will not receive call information.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 4010 Seite 104

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 4010

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info