Bedienungsanleitung Garmin GPSMAP 451 (Seite 71 von 78) (Englisch)

501947

Zoom out

Zoom in

Vorherige Seite

1/78

Nächste Seite

Appendix

GPSMAP 400/500 Series Owner’s Manual 65

contains data copy protection.

—Your unit needs to have an SD card inserted into the SD card

slot in order to perform the function you requested.

—shows the MMSI or name associated

with an MMSI.

—internal problem with the unit. Contact your dealer or

Garmin Product Support to have the unit serviced.

—the Deep Water Alarm depth has been reached.

—the MMSI number is

already in the DSC directory. Use a different number.

—the DSC directory has

reached the maximum of 100 contacts. Delete unneeded contacts to add new

ones.

—a DSC distress call has been received. Take appropriate action.

—the target water temperature

is 2°F (1.1°C) above or below the temperature specied by the Water

Temperature Alarm. These messages appear when you enter or leave that zone.

—the boat is approaching a safe region as dened by

your conguration settings.

—the boat is approaching an unsafe region as dened

by your conguration settings.

—a beep sounds (if enabled) when a sh is detected. This alarm

does not show a message banner.

—enter a valid MMSI.

—the unit has lost satellite signals. Check antenna

connections or try moving to a location with a clear view of the sky.

—you must enter an appropriate Keel

Offset for the transducer (page 51).

attempted to transfer

user data from an SD card that does not contain the specied type of data.

Make sure there is data to transfer on the SD card.

—you are off course the distance set in the “Off Course”

alarm.

—you entered a route name that already exists in

memory. Modify the route name or delete the previous route name.

—you attempted to add more than 250 points to a route. Reduce

the number of points or create a second route.

—an uploaded route from another device has more than 250

waypoints and was truncated to t.

—no additional route waypoints can be saved.

—the Shallow Water Alarm depth has been reached.

—the external sonar device you are connected to

needs a software update.

—there is an internal problem with the unit. Contact your

dealer or Garmin Product Support to have the unit serviced.

—the external sonar device you were connected to has

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 451 Seite 71

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 451

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info