Bedienungsanleitung Garmin GPSMAP 526 (Seite 52 von 78) (Englisch)

501949

Zoom out

Zoom in

Vorherige Seite

1/78

Nächste Seite

Conguring the Chartplotter

46 GPSMAP 400/500 Series Owner’s Manual



Use the Congure screen to congure unit settings.



To change general system settings from the Home screen, select 

> .

—turn Simulator mode on or off. Select  to set simulator

options, such as simulated position, speed, and direction.

—select  to set when the unit makes audible sounds.

Select  >  to brighten or darken the backlight. Select 

>  to switch between Day mode and Night mode (page 4).

—turn Auto Power  or . When  is selected, the

chartplotter will automatically turn on whenever power is applied, unless the

chartplotter is turned off with the Power Key before power is lost.

• —view GPS satellites.

• —view the GPS satellite constellation.

• —toggle WAAS (in North America) or EGNOS (in

Europe) on or off. WAAS/EGNOS can provide more-accurate GPS position

information. However, when using WAAS or EGNOS, the device takes

longer to acquire satellites.

• —select , , or . The speed lter averages the speed

of your boat over a short period of time for smoother speed values.

• —view system information and reset factory settings

(page 6). The  >  option is provided as a

troubleshooting tool. A Garmin Product Support representative may ask

you to use this feature to retrieve data about your chartplotter.

—displays a list of system events. Select an event to view additional

information.



To change units of measure from the Home screen, select  >

 > .

—a global setting that denes individual units of measure at

the same time: , , ,

or . Select  to individually dene units of measure for depth,

temperature, distance, speed, elevation, volume, and pressure.

: You must be receiving NMEA sonar depth data or have a built-in

sonar with a temperature-capable transducer to view depth and water

temperature information.

—sets the reference used in calculating heading information.

• —automatically sets the magnetic declination for your

location.

• —sets true north as the heading reference.

• —sets grid north as the heading reference (000º).

• —allows you to set the magnetic variation value.

—change the coordinate style in which a given location

reading appears. Do not change the position format unless you are using a map

or chart that species a different position format.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 526 Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 526

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info