Bedienungsanleitung Garmin GPSMAP 556s (Seite 53 von 78) (Englisch)

585695

Zoom out

Zoom in

Vorherige Seite

1/78

Nächste Seite

Conguring the Chartplotter

GPSMAP 400/500 Series Owner’s Manual 47

—change the coordinate system in which the map is structured.

Do not change the map datum unless you are using a map or chart that

species a different map datum.

—set the time options.

• —select , , or  time format.

• —set the time zone you want displayed for time readings. If

 is selected for the Time Zone, the DST option is not available and is

automatically set to .

•  (Daylight Saving Time)—select , , or . The auto setting

automatically turns daylight saving time on or off, depending on the time

of year.

• —specify the reference time (from 30 minutes to 24

hours) used to calculate the barometric pressure trend. The trend is

displayed on the wind gauge when ground wind is selected (page 35) or on

the Cruising data bar (page 9).



To change the system language, from the Home screen, select  >

 > . Select the language.



To change navigation preferences, from the Home screen, select 

>  > .

—for saved routes, this determines whether route turns are

indicated by number (Turn 1, Turn 2, and so on) or by waypoint name, or

whether the description of turns is hidden.

—set how much time or how far before a turn in a route that

you transition to the next leg.

—specify the sensor used for wind numbers and fuel economy.

Select  or  to toggle between water (from a water-speed

sensor) and GPS (from the calculated GPS speed).

—set the automatic guidance parameters:

• —set the minimum depth (chart depth datum) to allow when

calculating an automatic guidance path. A safe depth of less than one meter

is not allowed when using automatic guidance.

• —set the minimum height (chart height datum) of a bridge that

your boat can safely travel under.

• —set the safe distance for your boat from the shore:

, , , , or .



The Shoreline Distance setting indicates how close to the shore you want the

auto-guidance line to be placed. The auto-guidance line may move if you

change this setting while navigating.

The available values for the Shoreline Distance setting (, ,

, , or ) are relative, not absolute. To ensure that the auto-

guidance line is placed an appropriate distance from shore, you can assess the

placement of the auto-guidance line using one or more familiar destinations

that require navigation through a narrow waterway.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 556s Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 556s

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info