Bedienungsanleitung Garmin GPSMAP 557 (Seite 27 von 48) (Englisch)

501959

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Select Menu > Transmit Radar.

Adjusting the Radar Range

The range of the radar signal indicates the length of the pulsed

signal transmitted and received by the radar. As the range

increases, the radar transmits longer pulses in order to reach

distant targets. Closer targets, especially rain and waves, also

reflect the longer pulses, which can add noise to the Radar

screen. Viewing information about longer-range targets can also

decrease the amount of space available on the Radar screen for

viewing information about shorter-range targets.

• Select to decrease the range.

• Select to increase the range.

Tips for Selecting a Radar Range

• Determine what information you need to see on the Radar

screen.

For example, do you need information about nearby weather

conditions or targets and traffic, or are you more concerned

about distant weather conditions?

• Assess the environmental conditions where the radar is being

used.

Especially in inclement weather, longer-range radar signals

can increase the clutter on the Radar screen and make it

more difficult to view information about shorter-range targets.

In rain, shorter-range radar signals can enable you to view

information about nearby objects more effectively, if the rain

clutter setting is configured optimally.

• Select the shortest effective range, given your reason for

using radar and the present environmental conditions.

Adjusting the Zoom Scale on the Radar

Screen

The radar zoom scale, also called the radar signal range,

represents the distance from your position (the center) to the

outermost ring.

From a Radar screen, select or .

Each ring represents an even division of the zoom scale.

For example, if the zoom scale is set at 3 miles, each ring

represents 1 mile from the center out.

Marking a Waypoint on the Radar Screen

From a Radar screen or the Radar overlay, select a location.

Select New Waypoint.

Sentry Mode

Sentry mode allows you to put the radar into timed-transmit

mode, in which you can configure a radar transmit and standby

cycle to conserve power. You can also enable a guard zone in

this mode, which identifies a safe zone around your boat and

sounds an alarm when a radar object enters the zone. Sentry

mode works with all Garmin GMR model radars.

Enabling Timed Transmit

From the sentry screen, select Menu > Sentry Setup >

Timed Transmit > On.

Setting the Standby and Transmit Times

Before you can set the standby and transmit times, you must

enable timed transmit (Enabling Timed Transmit).

To help conserve power, you can indicate the radar standby

time and the transmit time to implement periodic radar signal

transmissions at set intervals.

From the sentry screen, select Menu > Sentry Setup.

Select Stdby Time.

Enter the time interval between radar signal transmissions.

Select Transmit Time.

Enter the duration of each radar signal transmission.

Enabling a Guard Zone

From the sentry screen, select Menu > Sentry Setup >

Enable Guard Zone.

Defining a Circular Guard Zone

Before you can define the boundaries of the guard zone, you

must enable a guard zone (Enabling a Guard Zone).

You can define a circular guard zone that completely

encompasses your boat.

From the sentry screen, select Menu > Sentry Setup >

Adjust Guard Zone > Move Radar Guard Zone > Circle.

Select the location of the outer guard zone circle.

Select the location of the inner guard zone circle to define the

width of the guard zone.

Defining a Partial Guard Zone

You can define the boundaries of a guard zone that does not

completely encompass your boat.

From the sentry screen, select Menu > Sentry Setup >

Adjust Guard Zone > Move Radar Guard Zone > Corner 1.

Touch and drag the location of the outer guard-zone corner

Select Corner 2.

Touch the location of the inner guard-zone corner

to define

the width of the guard zone.

Viewing a List of AIS Threats

From any Radar screen or the Radar overlay, you can view and

customize the appearance of a list of AIS threats.

From a Radar screen or the Radar overlay, select Menu >

Other Vessels > AIS List.

Showing AIS Vessels on the Radar Screen

AIS requires the use of an external AIS device and active

transponder signals from other vessels.

You can configure how other vessels appear on the Radar

screen. If any setting (except the AIS display range) is

configured for one radar mode, the setting is applied to every

other radar mode. The details and projected heading settings

configured for one radar mode are applied to every other radar

mode and to the Radar overlay.

From a Radar screen or the Radar overlay, select Menu >

Other Vessels > Display Setup.

Select an option:

• To indicate the distance from your location within which

AIS vessels appear, select AIS Display Range, and

select a distance.

• To show details about AIS-activated vessels, select

Details > Show.

• To set the projected heading time for AIS-activated

vessels, select Projected Heading, and enter the time.

Radar 21

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 557 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 557

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info