Bedienungsanleitung Garmin GPSMAP 6000 (Seite 23 von 136) (Englisch)

501966

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

GPSMAP

6000/7000 Series Owner’s Manual 17

Charts and 3D Chart Views

• Select  to indicate the distance from your location in which AIS vessels appear. Select a

distance.

• Select  >  to show MARPA-tagged vessels.

• Select >  to show details about AIS-activated and MARPA-tagged vessels.

• Select  to set the projected heading time for AIS-activated and MARPA-tagged vessels.

For the GPSMAP 6000 series, use the  or the  to enter the time. For the

GPSMAP 7000 series, use the on-screen keyboard. Select .

• Select  to show the tracks of AIS vessels. Select the length of the track that appears using a trail.

Activating a Target for an AIS Vessel

: The Fishing chart and Mariner’s Eye 3D are available with a preprogrammed BlueChart g2 Vision

data card.

1. From the Home screen, select .

2. Select , , , or .

3. Complete an action:

• For the GPSMAP 6000 series, use the  to select an AIS vessel.

• For the GPSMAP 7000 series, touch an AIS vessel.

4. Select  > .

Viewing Information about a Targeted AIS Vessel

You can view the AIS signal status, MMSI, GPS speed, GPS heading, and other information that is reported

about a targeted AIS vessel.

1. From the Home screen, select .

2. Select , , , or .

3. Complete an action:

• For the GPSMAP 6000 series, use the  to select an AIS vessel.

• For the GPSMAP 7000 series, touch an AIS vessel.

4. Select .

Deactivating a Target for an AIS Vessel

: The Fishing chart and Mariner’s Eye 3D are available with a preprogrammed BlueChart g2 Vision

data card.

1. From the Home screen, select .

2. Select , , , or .

3. Complete an action:

• For the GPSMAP 6000 series, use the  to select the AIS vessel.

• For the GPSMAP 7000 series, touch the AIS vessel.

4. Select  > .

Setting the Safe-zone Collision Alarm

The safe-zone collision alarm is used only with AIS and MARPA. MARPA functionality works with radar

(page 77). The safe zone is used for collision avoidance, and can be customized. All safe-zone collision alarm

settings are applied to all charts, to all 3D chart views, to all radar modes, and to the Radar Overlay.

1. From the Home screen, select  >  > > .

A message banner appears and an alarm sounds when a MARPA-tagged object or an AIS-activated vessel

enters the safe-zone ring around your boat. The object is also labeled as dangerous on the screen. The 

setting disables the message banner and the audible alarm, but the object is still labeled as dangerous on the

screen.

2. Selectto set the measured radius of the safe-zone ring to a specied distance from 500 ft. to 2.0 nm

(or from 150 m to 3.0 km, or from 500 ft. to 2.0 mi.).

3. Select a distance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 6000 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 6000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info