Bedienungsanleitung Garmin GPSMAP 6000 (Seite 39 von 136) (Englisch)

501966

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

GPSMAP

6000/7000 Series Owner’s Manual 33

Navigation

• Select  to view a list of marinas and other offshore points of interest, listed by name

(page 42).

• Select  to search waypoints, routes, tracks, and offshore points of interest by name

(page 43).

3. Select a destination.

Courses

You can set and follow a course to a destination using one of three methods: Go To, Route To, or Guide To.

• —takes you directly to the destination.

• —creates a route from your location to a destination, allowing you to add turns along the way.

• —uses BlueChart g2 Vision chart data to suggest the best path to your destination using Auto

Guidance. You must be using a BlueChart g2 Vision data card for this option to appear.

Setting and Following a Direct Course Using Go To



CAUTION

When using Go To, a direct course and a corrected course may pass over land or shallow water. Use visual

sightings and steer to avoid land, shallow water, and other dangerous objects.

You can set and follow a direct course from your current location to a selected destination.

1. Select a destination using a chart or Where To? (page 32).

2. Select  > .

A magenta line appears. In the center or the magenta line is a thinner purple line that represents the

corrected course from your current location to the destination. The corrected course is dynamic, and it

moves with your boat when you are off course.

3. Follow the magenta line, steering to avoid land, shallow water, and other obstacles.

: If you are off course, follow the purple line (corrected course) to go to your destination, or steer

back to the magenta line (direct course).

Creating and Following a New Route Using Route To

See “Creating and Navigating a Route from Your Present Location” (page 35).

Following a Saved Route Using Route To

See “Browsing for and Navigating a Saved Route” (page 44).

Setting and Following a Course Using Auto Guidance



CAUTION

The Auto Guidance feature of the BlueChart g2 Vision data card is based on electronic chart information. That

data does not assure obstacle and bottom clearance. Carefully compare the course to all visual sightings and

avoid any land, shallow water, or other obstacles that may be in your path.

1. Select a destination using a chart or Where To? (page 32).

2. Select  > .

3. Review the course indicated by the magenta Auto Guidance line.

: A gray line within any part of the magenta line indicates that Auto Guidance cannot calculate part

of the Auto Guidance line. This is due to the minimum safe water depth and the minimum safe obstacle

height settings (page 59).

4 Follow the magenta line, steering to avoid land, shallow water, and other obstacles.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 6000 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 6000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info