Bedienungsanleitung Garmin GPSMAP 6000 (Seite 109 von 136) (Englisch)

501966

109

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

GPSMAP

6000/7000 Series Owner’s Manual 103

Sonar

Conguring the Advanced Sonar Settings

: These features are available only on the GSD 24 and GSD 26.

Before you can congure the , you must have a SD 26 and more than one water-temperature

sensor or temperature-capable transducer.

With the GSD 24 and GSD 26, you can congure various sonar display and data source settings.

1. From the Home screen, select .

2. Select a sonar view.

3. Select  > .

4. Select one or more options:

• Select to stop the transducer from transmitting.

• Select  to adjust the time-varying gain, which can reduce noise.

• Select  to adjust how the targets appear on the screen. If the echo is too wide, the targets

will blend together. If the echo is too narrow, the targets might be small and difcult to see.

• Select  to select which frequency to use for determining depth.

• For the GSD 26, select  to select which water-temperature sensor or temperature-capable

transducer is the source for the water temperature log.

Frequencies

Selecting Frequencies

You can indicate which frequencies are used when using a dual-frequency transducer. With the GSD 26, you

can use a chirp frequency to display more-dened targets on the screen.

1. From the Home screen, select .

2. Select a sonar view.

3. Select  > .

4. Complete an action:

• Select  to show data from a 200 kHz sonar signal. This is useful mainly for more shallow,

inland waters.

• Select  to show data from a 50 kHz sonar signal. This is useful mainly for deeper waters.

• For the GSD 22 or GSD 24, select  to show both 200 kHz and 50 kHz data

• For a GSD 26 used with a broadband transducer, select  to transmit a chirp signal on the

high channel.

• For a GSD 26 used with a broadband transducer, select  to transmit a chirp signal on the low

channel.

Managing Frequencies

: This feature is available only on the GSD 26.

You can set the GSD 26 to operate on a wide variety of popular, discrete shing frequencies. For maximum

depth penetration, set the frequency to a low setting.

Setting up New Frequencies

1. From the Home screen, select .

2. Select a sonar view.

3. Select  >  > .

4. Select .

5. Select  or .

6. Enter a frequency:

• For the GPSMAP 6000 series, use the  or .

• For the GPSMAP 7000 series, use the on-screen keyboard.

7. Select .

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 6000 Seite 109

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 6000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info